Safe working technique; four axle stands
Clash Royale CLAN TAG#URR8PPP
up vote
5
down vote
favorite
I would never dream of going under a car without it adequately supported; axle stands plus wheels, if removed, laid under the sills (rockers).
I have a full set of brake lines plus a serious amount of welding to do on a car that’s currently next in the queue to come into the garage. Not to mention the fact I’ve got to drop the suspension off it.
All of this would be considerably easier if I could get the whole thing into the air. I’ve worked with others who have supported a car on four stands with all four wheels removed but it isn’t something I’ve ever done myself. I have a distant memory of someone once telling me that it wasn’t safe but that may have been folklore as much as actual technically sound advice.
So, my question: four stands, is it considered a safe working practice?
safety
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
add a comment |
up vote
5
down vote
favorite
I would never dream of going under a car without it adequately supported; axle stands plus wheels, if removed, laid under the sills (rockers).
I have a full set of brake lines plus a serious amount of welding to do on a car that’s currently next in the queue to come into the garage. Not to mention the fact I’ve got to drop the suspension off it.
All of this would be considerably easier if I could get the whole thing into the air. I’ve worked with others who have supported a car on four stands with all four wheels removed but it isn’t something I’ve ever done myself. I have a distant memory of someone once telling me that it wasn’t safe but that may have been folklore as much as actual technically sound advice.
So, my question: four stands, is it considered a safe working practice?
safety
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
add a comment |
up vote
5
down vote
favorite
up vote
5
down vote
favorite
I would never dream of going under a car without it adequately supported; axle stands plus wheels, if removed, laid under the sills (rockers).
I have a full set of brake lines plus a serious amount of welding to do on a car that’s currently next in the queue to come into the garage. Not to mention the fact I’ve got to drop the suspension off it.
All of this would be considerably easier if I could get the whole thing into the air. I’ve worked with others who have supported a car on four stands with all four wheels removed but it isn’t something I’ve ever done myself. I have a distant memory of someone once telling me that it wasn’t safe but that may have been folklore as much as actual technically sound advice.
So, my question: four stands, is it considered a safe working practice?
safety
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
I would never dream of going under a car without it adequately supported; axle stands plus wheels, if removed, laid under the sills (rockers).
I have a full set of brake lines plus a serious amount of welding to do on a car that’s currently next in the queue to come into the garage. Not to mention the fact I’ve got to drop the suspension off it.
All of this would be considerably easier if I could get the whole thing into the air. I’ve worked with others who have supported a car on four stands with all four wheels removed but it isn’t something I’ve ever done myself. I have a distant memory of someone once telling me that it wasn’t safe but that may have been folklore as much as actual technically sound advice.
So, my question: four stands, is it considered a safe working practice?
safety
safety
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
edited Dec 10 at 0:49
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
108k16163354
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
asked Dec 9 at 23:39
Steve Matthews
19.7k22969
19.7k22969
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
up vote
5
down vote
accepted
It's absolutely safe as long as the jack stands are placed correctly. What is "placed correctly"? That depends on the vehicle which they will be under. You have to use good placement, but they are safe, no doubt. Placement is everything. Well, hard, level ground helps as well.
Consider when people use a two post lift with four pads. You place the lifting pads under the vehicle at the proper points and lift the vehicle. Nobody thinks twice who has used these and places the pads correctly. Why is that? Because it's safe. There's nothing different here other than the vehicle doesn't go up/down with the supports.
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
1
Also make sure the stands are good quality with a "wide" base for stability.
– Solar Mike
Dec 10 at 7:11
1
And that the flooring that they’re standing on is level, steady and strong enough to handle the loads.
– Bob Cross♦
Dec 10 at 12:38
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "224"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f61715%2fsafe-working-technique-four-axle-stands%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
5
down vote
accepted
It's absolutely safe as long as the jack stands are placed correctly. What is "placed correctly"? That depends on the vehicle which they will be under. You have to use good placement, but they are safe, no doubt. Placement is everything. Well, hard, level ground helps as well.
Consider when people use a two post lift with four pads. You place the lifting pads under the vehicle at the proper points and lift the vehicle. Nobody thinks twice who has used these and places the pads correctly. Why is that? Because it's safe. There's nothing different here other than the vehicle doesn't go up/down with the supports.
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
1
Also make sure the stands are good quality with a "wide" base for stability.
– Solar Mike
Dec 10 at 7:11
1
And that the flooring that they’re standing on is level, steady and strong enough to handle the loads.
– Bob Cross♦
Dec 10 at 12:38
add a comment |
up vote
5
down vote
accepted
It's absolutely safe as long as the jack stands are placed correctly. What is "placed correctly"? That depends on the vehicle which they will be under. You have to use good placement, but they are safe, no doubt. Placement is everything. Well, hard, level ground helps as well.
Consider when people use a two post lift with four pads. You place the lifting pads under the vehicle at the proper points and lift the vehicle. Nobody thinks twice who has used these and places the pads correctly. Why is that? Because it's safe. There's nothing different here other than the vehicle doesn't go up/down with the supports.
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
1
Also make sure the stands are good quality with a "wide" base for stability.
– Solar Mike
Dec 10 at 7:11
1
And that the flooring that they’re standing on is level, steady and strong enough to handle the loads.
– Bob Cross♦
Dec 10 at 12:38
add a comment |
up vote
5
down vote
accepted
up vote
5
down vote
accepted
It's absolutely safe as long as the jack stands are placed correctly. What is "placed correctly"? That depends on the vehicle which they will be under. You have to use good placement, but they are safe, no doubt. Placement is everything. Well, hard, level ground helps as well.
Consider when people use a two post lift with four pads. You place the lifting pads under the vehicle at the proper points and lift the vehicle. Nobody thinks twice who has used these and places the pads correctly. Why is that? Because it's safe. There's nothing different here other than the vehicle doesn't go up/down with the supports.
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
It's absolutely safe as long as the jack stands are placed correctly. What is "placed correctly"? That depends on the vehicle which they will be under. You have to use good placement, but they are safe, no doubt. Placement is everything. Well, hard, level ground helps as well.
Consider when people use a two post lift with four pads. You place the lifting pads under the vehicle at the proper points and lift the vehicle. Nobody thinks twice who has used these and places the pads correctly. Why is that? Because it's safe. There's nothing different here other than the vehicle doesn't go up/down with the supports.
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
answered Dec 10 at 0:48
Pᴀᴜʟsᴛᴇʀ2♦
108k16163354
108k16163354
1
Also make sure the stands are good quality with a "wide" base for stability.
– Solar Mike
Dec 10 at 7:11
1
And that the flooring that they’re standing on is level, steady and strong enough to handle the loads.
– Bob Cross♦
Dec 10 at 12:38
add a comment |
1
Also make sure the stands are good quality with a "wide" base for stability.
– Solar Mike
Dec 10 at 7:11
1
And that the flooring that they’re standing on is level, steady and strong enough to handle the loads.
– Bob Cross♦
Dec 10 at 12:38
1
1
Also make sure the stands are good quality with a "wide" base for stability.
– Solar Mike
Dec 10 at 7:11
Also make sure the stands are good quality with a "wide" base for stability.
– Solar Mike
Dec 10 at 7:11
1
1
And that the flooring that they’re standing on is level, steady and strong enough to handle the loads.
– Bob Cross♦
Dec 10 at 12:38
And that the flooring that they’re standing on is level, steady and strong enough to handle the loads.
– Bob Cross♦
Dec 10 at 12:38
add a comment |
Thanks for contributing an answer to Motor Vehicle Maintenance & Repair Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f61715%2fsafe-working-technique-four-axle-stands%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown