Batch convert (decode) audio into multiple formats with ffmpeg
Clash Royale CLAN TAG#URR8PPP
up vote
1
down vote
favorite
I have a directory with a bunch of CD quality (16bit 44100Hz) wave-files.
How can I batch decode those into different formats (lets say FLAC, OGG and MP3) using ffmpeg?
Update: here are the commands one by one as suggested by @StephenHarris
ffmpeg -i input.wav output.ogg
ffmpeg -i input.wav output.mp3
ffmpeg -i input.wav output.flac
audio ffmpeg mp3 flac ogg
add a comment |
up vote
1
down vote
favorite
I have a directory with a bunch of CD quality (16bit 44100Hz) wave-files.
How can I batch decode those into different formats (lets say FLAC, OGG and MP3) using ffmpeg?
Update: here are the commands one by one as suggested by @StephenHarris
ffmpeg -i input.wav output.ogg
ffmpeg -i input.wav output.mp3
ffmpeg -i input.wav output.flac
audio ffmpeg mp3 flac ogg
2
Take it step by step. How would you convert one file? If you can work out how to convert one wav file into flac, into ogg, into mp3 (3 separate commands) then we can add a loop around it. So "what command would you use to convert wav to flac?" "what command would convert wav to ogg?" "What command would convert wav to mp3?"
– Stephen Harris
Dec 10 at 0:56
1
@StephenHarris, thanks, just working it out :-)
– nath
Dec 10 at 0:58
1
@StephenHarris done :-)))
– nath
Dec 10 at 1:37
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I have a directory with a bunch of CD quality (16bit 44100Hz) wave-files.
How can I batch decode those into different formats (lets say FLAC, OGG and MP3) using ffmpeg?
Update: here are the commands one by one as suggested by @StephenHarris
ffmpeg -i input.wav output.ogg
ffmpeg -i input.wav output.mp3
ffmpeg -i input.wav output.flac
audio ffmpeg mp3 flac ogg
I have a directory with a bunch of CD quality (16bit 44100Hz) wave-files.
How can I batch decode those into different formats (lets say FLAC, OGG and MP3) using ffmpeg?
Update: here are the commands one by one as suggested by @StephenHarris
ffmpeg -i input.wav output.ogg
ffmpeg -i input.wav output.mp3
ffmpeg -i input.wav output.flac
audio ffmpeg mp3 flac ogg
audio ffmpeg mp3 flac ogg
edited Dec 10 at 4:42
asked Dec 10 at 0:20
nath
814424
814424
2
Take it step by step. How would you convert one file? If you can work out how to convert one wav file into flac, into ogg, into mp3 (3 separate commands) then we can add a loop around it. So "what command would you use to convert wav to flac?" "what command would convert wav to ogg?" "What command would convert wav to mp3?"
– Stephen Harris
Dec 10 at 0:56
1
@StephenHarris, thanks, just working it out :-)
– nath
Dec 10 at 0:58
1
@StephenHarris done :-)))
– nath
Dec 10 at 1:37
add a comment |
2
Take it step by step. How would you convert one file? If you can work out how to convert one wav file into flac, into ogg, into mp3 (3 separate commands) then we can add a loop around it. So "what command would you use to convert wav to flac?" "what command would convert wav to ogg?" "What command would convert wav to mp3?"
– Stephen Harris
Dec 10 at 0:56
1
@StephenHarris, thanks, just working it out :-)
– nath
Dec 10 at 0:58
1
@StephenHarris done :-)))
– nath
Dec 10 at 1:37
2
2
Take it step by step. How would you convert one file? If you can work out how to convert one wav file into flac, into ogg, into mp3 (3 separate commands) then we can add a loop around it. So "what command would you use to convert wav to flac?" "what command would convert wav to ogg?" "What command would convert wav to mp3?"
– Stephen Harris
Dec 10 at 0:56
Take it step by step. How would you convert one file? If you can work out how to convert one wav file into flac, into ogg, into mp3 (3 separate commands) then we can add a loop around it. So "what command would you use to convert wav to flac?" "what command would convert wav to ogg?" "What command would convert wav to mp3?"
– Stephen Harris
Dec 10 at 0:56
1
1
@StephenHarris, thanks, just working it out :-)
– nath
Dec 10 at 0:58
@StephenHarris, thanks, just working it out :-)
– nath
Dec 10 at 0:58
1
1
@StephenHarris done :-)))
– nath
Dec 10 at 1:37
@StephenHarris done :-)))
– nath
Dec 10 at 1:37
add a comment |
2 Answers
2
active
oldest
votes
up vote
2
down vote
accepted
ffmpeg
accepts multiple output formats. Set the input file.format with -i
followed by the output file.format: ffmpeg -i input.wav output.ogg output.mp3 output.flac
Batch conversion:
As a simple one liner with putting each format in a separate folder:
mkdir mp3 ogg flac; for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "./mp3/$i%.*.mp3" -b:a 320000 "./ogg/$i%.*.ogg" "./flac/$i%.*.flac"; done
Decode all into one folder:
for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "$i%.*.mp3" -b:a 320000 "$i%.*.ogg" "$i%.*.flac"; done
-b:a 320000
sets the bitrate for the decoding of mp3
and ogg
and can be adjusted (the bitrate is measured in bits/sec so 320kbit/s
equals 320000
).
thanks to https://stackoverflow.com/a/33766147 for the parameter-expansion
add a comment |
up vote
1
down vote
Using GNU Parallel you can run:
parallel ffmpeg -i 1 1..2 ::: *.wav ::: ogg mp3 flac
1 = replacement string for first input source
1. = replacement string for first input source with extension removed
2 = replacement string for second input source
::: *.wav = input source 1
::: ogg mp3 flac = input source 2
This will use all your cores.
thanks for your reply, would you mind explaining the line?
– nath
Dec 16 at 3:25
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f487024%2fbatch-convert-decode-audio-into-multiple-formats-with-ffmpeg%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
2
down vote
accepted
ffmpeg
accepts multiple output formats. Set the input file.format with -i
followed by the output file.format: ffmpeg -i input.wav output.ogg output.mp3 output.flac
Batch conversion:
As a simple one liner with putting each format in a separate folder:
mkdir mp3 ogg flac; for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "./mp3/$i%.*.mp3" -b:a 320000 "./ogg/$i%.*.ogg" "./flac/$i%.*.flac"; done
Decode all into one folder:
for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "$i%.*.mp3" -b:a 320000 "$i%.*.ogg" "$i%.*.flac"; done
-b:a 320000
sets the bitrate for the decoding of mp3
and ogg
and can be adjusted (the bitrate is measured in bits/sec so 320kbit/s
equals 320000
).
thanks to https://stackoverflow.com/a/33766147 for the parameter-expansion
add a comment |
up vote
2
down vote
accepted
ffmpeg
accepts multiple output formats. Set the input file.format with -i
followed by the output file.format: ffmpeg -i input.wav output.ogg output.mp3 output.flac
Batch conversion:
As a simple one liner with putting each format in a separate folder:
mkdir mp3 ogg flac; for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "./mp3/$i%.*.mp3" -b:a 320000 "./ogg/$i%.*.ogg" "./flac/$i%.*.flac"; done
Decode all into one folder:
for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "$i%.*.mp3" -b:a 320000 "$i%.*.ogg" "$i%.*.flac"; done
-b:a 320000
sets the bitrate for the decoding of mp3
and ogg
and can be adjusted (the bitrate is measured in bits/sec so 320kbit/s
equals 320000
).
thanks to https://stackoverflow.com/a/33766147 for the parameter-expansion
add a comment |
up vote
2
down vote
accepted
up vote
2
down vote
accepted
ffmpeg
accepts multiple output formats. Set the input file.format with -i
followed by the output file.format: ffmpeg -i input.wav output.ogg output.mp3 output.flac
Batch conversion:
As a simple one liner with putting each format in a separate folder:
mkdir mp3 ogg flac; for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "./mp3/$i%.*.mp3" -b:a 320000 "./ogg/$i%.*.ogg" "./flac/$i%.*.flac"; done
Decode all into one folder:
for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "$i%.*.mp3" -b:a 320000 "$i%.*.ogg" "$i%.*.flac"; done
-b:a 320000
sets the bitrate for the decoding of mp3
and ogg
and can be adjusted (the bitrate is measured in bits/sec so 320kbit/s
equals 320000
).
thanks to https://stackoverflow.com/a/33766147 for the parameter-expansion
ffmpeg
accepts multiple output formats. Set the input file.format with -i
followed by the output file.format: ffmpeg -i input.wav output.ogg output.mp3 output.flac
Batch conversion:
As a simple one liner with putting each format in a separate folder:
mkdir mp3 ogg flac; for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "./mp3/$i%.*.mp3" -b:a 320000 "./ogg/$i%.*.ogg" "./flac/$i%.*.flac"; done
Decode all into one folder:
for i in *.wav; do ffmpeg -i "$i" -b:a 320000 "$i%.*.mp3" -b:a 320000 "$i%.*.ogg" "$i%.*.flac"; done
-b:a 320000
sets the bitrate for the decoding of mp3
and ogg
and can be adjusted (the bitrate is measured in bits/sec so 320kbit/s
equals 320000
).
thanks to https://stackoverflow.com/a/33766147 for the parameter-expansion
edited Dec 10 at 2:50
answered Dec 10 at 1:37
nath
814424
814424
add a comment |
add a comment |
up vote
1
down vote
Using GNU Parallel you can run:
parallel ffmpeg -i 1 1..2 ::: *.wav ::: ogg mp3 flac
1 = replacement string for first input source
1. = replacement string for first input source with extension removed
2 = replacement string for second input source
::: *.wav = input source 1
::: ogg mp3 flac = input source 2
This will use all your cores.
thanks for your reply, would you mind explaining the line?
– nath
Dec 16 at 3:25
add a comment |
up vote
1
down vote
Using GNU Parallel you can run:
parallel ffmpeg -i 1 1..2 ::: *.wav ::: ogg mp3 flac
1 = replacement string for first input source
1. = replacement string for first input source with extension removed
2 = replacement string for second input source
::: *.wav = input source 1
::: ogg mp3 flac = input source 2
This will use all your cores.
thanks for your reply, would you mind explaining the line?
– nath
Dec 16 at 3:25
add a comment |
up vote
1
down vote
up vote
1
down vote
Using GNU Parallel you can run:
parallel ffmpeg -i 1 1..2 ::: *.wav ::: ogg mp3 flac
1 = replacement string for first input source
1. = replacement string for first input source with extension removed
2 = replacement string for second input source
::: *.wav = input source 1
::: ogg mp3 flac = input source 2
This will use all your cores.
Using GNU Parallel you can run:
parallel ffmpeg -i 1 1..2 ::: *.wav ::: ogg mp3 flac
1 = replacement string for first input source
1. = replacement string for first input source with extension removed
2 = replacement string for second input source
::: *.wav = input source 1
::: ogg mp3 flac = input source 2
This will use all your cores.
edited Dec 16 at 14:06
answered Dec 16 at 1:09
Ole Tange
11.9k1451105
11.9k1451105
thanks for your reply, would you mind explaining the line?
– nath
Dec 16 at 3:25
add a comment |
thanks for your reply, would you mind explaining the line?
– nath
Dec 16 at 3:25
thanks for your reply, would you mind explaining the line?
– nath
Dec 16 at 3:25
thanks for your reply, would you mind explaining the line?
– nath
Dec 16 at 3:25
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f487024%2fbatch-convert-decode-audio-into-multiple-formats-with-ffmpeg%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Take it step by step. How would you convert one file? If you can work out how to convert one wav file into flac, into ogg, into mp3 (3 separate commands) then we can add a loop around it. So "what command would you use to convert wav to flac?" "what command would convert wav to ogg?" "What command would convert wav to mp3?"
– Stephen Harris
Dec 10 at 0:56
1
@StephenHarris, thanks, just working it out :-)
– nath
Dec 10 at 0:58
1
@StephenHarris done :-)))
– nath
Dec 10 at 1:37