SMART RAID is not identified by FreeNAS for HP Proliant DL380 G7 [on hold]

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP











up vote
1
down vote

favorite












Initially, I installed FreeNAS 11.2 RC1, in i7 Core, 8GB RAM, 12TB (4 TB X 3 HDD) with FreeNAS's RAIDZ2, it worked really good.



Now, I bought the following server, installed FreeNAS 11.2 RC1. After installation the storage is not showing the SMART RAID Storage which in Having HP Storage Controller. I tried configuring different RAIDS and different Volumes in that storage, still the FreeNAS could not able to find it.



1) HP Proliant DL380 G7
2) 12 GB RAM
3) Intel xeon(R) X5650-CPU 2.67 GH, 12MB processor
4) System Disk - 150 GB x 2, 6G SAS
5) Storage Disks - HP storage works P2000 (each G6 SAS 7.2k)
 a) 2TB x 12
 b) 4TB x 12
 c) 4TB x 12
6) RAID Controller- HP400I smart controller
7) Broadcom net Xtreme -
 4 x 1G connectors
 1 Management port
 node1 - 1G interface
 node2 - 1G interface


How can I make sure that FreeNAS identifies my storage and work on that?






freenas







share|improve this question









New contributor




Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











put on hold as unclear what you're asking by Scott, RalfFriedl, Romeo Ninov, schily, Jesse_b yesterday


Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.














  • Did you install drivers for the controller?
    – Romeo Ninov
    yesterday














up vote
1
down vote

favorite












Initially, I installed FreeNAS 11.2 RC1, in i7 Core, 8GB RAM, 12TB (4 TB X 3 HDD) with FreeNAS's RAIDZ2, it worked really good.



Now, I bought the following server, installed FreeNAS 11.2 RC1. After installation the storage is not showing the SMART RAID Storage which in Having HP Storage Controller. I tried configuring different RAIDS and different Volumes in that storage, still the FreeNAS could not able to find it.



1) HP Proliant DL380 G7
2) 12 GB RAM
3) Intel xeon(R) X5650-CPU 2.67 GH, 12MB processor
4) System Disk - 150 GB x 2, 6G SAS
5) Storage Disks - HP storage works P2000 (each G6 SAS 7.2k)
 a) 2TB x 12
 b) 4TB x 12
 c) 4TB x 12
6) RAID Controller- HP400I smart controller
7) Broadcom net Xtreme -
 4 x 1G connectors
 1 Management port
 node1 - 1G interface
 node2 - 1G interface


How can I make sure that FreeNAS identifies my storage and work on that?






freenas







share|improve this question









New contributor




Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











put on hold as unclear what you're asking by Scott, RalfFriedl, Romeo Ninov, schily, Jesse_b yesterday


Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.














  • Did you install drivers for the controller?
    – Romeo Ninov
    yesterday












up vote
1
down vote

favorite









up vote
1
down vote

favorite











Initially, I installed FreeNAS 11.2 RC1, in i7 Core, 8GB RAM, 12TB (4 TB X 3 HDD) with FreeNAS's RAIDZ2, it worked really good.



Now, I bought the following server, installed FreeNAS 11.2 RC1. After installation the storage is not showing the SMART RAID Storage which in Having HP Storage Controller. I tried configuring different RAIDS and different Volumes in that storage, still the FreeNAS could not able to find it.



1) HP Proliant DL380 G7
2) 12 GB RAM
3) Intel xeon(R) X5650-CPU 2.67 GH, 12MB processor
4) System Disk - 150 GB x 2, 6G SAS
5) Storage Disks - HP storage works P2000 (each G6 SAS 7.2k)
 a) 2TB x 12
 b) 4TB x 12
 c) 4TB x 12
6) RAID Controller- HP400I smart controller
7) Broadcom net Xtreme -
 4 x 1G connectors
 1 Management port
 node1 - 1G interface
 node2 - 1G interface


How can I make sure that FreeNAS identifies my storage and work on that?






freenas







share|improve this question









New contributor




Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











Initially, I installed FreeNAS 11.2 RC1, in i7 Core, 8GB RAM, 12TB (4 TB X 3 HDD) with FreeNAS's RAIDZ2, it worked really good.



Now, I bought the following server, installed FreeNAS 11.2 RC1. After installation the storage is not showing the SMART RAID Storage which in Having HP Storage Controller. I tried configuring different RAIDS and different Volumes in that storage, still the FreeNAS could not able to find it.



1) HP Proliant DL380 G7
2) 12 GB RAM
3) Intel xeon(R) X5650-CPU 2.67 GH, 12MB processor
4) System Disk - 150 GB x 2, 6G SAS
5) Storage Disks - HP storage works P2000 (each G6 SAS 7.2k)
 a) 2TB x 12
 b) 4TB x 12
 c) 4TB x 12
6) RAID Controller- HP400I smart controller
7) Broadcom net Xtreme -
 4 x 1G connectors
 1 Management port
 node1 - 1G interface
 node2 - 1G interface


How can I make sure that FreeNAS identifies my storage and work on that?






freenas




freenas






share|improve this question









New contributor




Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 18 hours ago





















New contributor




Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked yesterday









Ratna Kumar

64




64




New contributor




Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Ratna Kumar is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.




put on hold as unclear what you're asking by Scott, RalfFriedl, Romeo Ninov, schily, Jesse_b yesterday


Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.






put on hold as unclear what you're asking by Scott, RalfFriedl, Romeo Ninov, schily, Jesse_b yesterday


Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.













  • Did you install drivers for the controller?
    – Romeo Ninov
    yesterday
















  • Did you install drivers for the controller?
    – Romeo Ninov
    yesterday















Did you install drivers for the controller?
– Romeo Ninov
yesterday




Did you install drivers for the controller?
– Romeo Ninov
yesterday















active

oldest

votes






















active

oldest

votes













active

oldest

votes









active

oldest

votes






active

oldest

votes
-

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Read more