How to set the font size to 11.5pt? [duplicate]
Clash Royale CLAN TAG#URR8PPP
This question already has an answer here:
How to specify an arbitrary (possibly non-integer) font size in LaTeX
1 answer
How do I set the font size to 11.5? 12 is too large and 11 is too small.
I used
documentclass[titlepage,11.5pt]article
but it still gives me size 11
fontsize
marked as duplicate by Stefan Pinnow, Raaja, Circumscribe, Christian Hupfer, Zarko Feb 8 at 11:25
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
add a comment |
This question already has an answer here:
How to specify an arbitrary (possibly non-integer) font size in LaTeX
1 answer
How do I set the font size to 11.5? 12 is too large and 11 is too small.
I used
documentclass[titlepage,11.5pt]article
but it still gives me size 11
fontsize
marked as duplicate by Stefan Pinnow, Raaja, Circumscribe, Christian Hupfer, Zarko Feb 8 at 11:25
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
8
The defaultarticle
class only has three choices10pt
,11pt
and12pt
, but you must not think of these like the little font size drop down menu in Microsoft word. These values are used to configure many aspects of the document layout, the size of subscripts and superscripts, the sizes of headings. Other font sizes are defined relative to these numbers. It's not designed to let you just choose an arbitrary value.
– Au101
Feb 7 at 22:46
1
However, you may be interested in tex.stackexchange.com/questions/47517/… tex.stackexchange.com/questions/200015/… tex.stackexchange.com/questions/340473/options-for-font-size etc.
– Au101
Feb 7 at 22:46
add a comment |
This question already has an answer here:
How to specify an arbitrary (possibly non-integer) font size in LaTeX
1 answer
How do I set the font size to 11.5? 12 is too large and 11 is too small.
I used
documentclass[titlepage,11.5pt]article
but it still gives me size 11
fontsize
This question already has an answer here:
How to specify an arbitrary (possibly non-integer) font size in LaTeX
1 answer
How do I set the font size to 11.5? 12 is too large and 11 is too small.
I used
documentclass[titlepage,11.5pt]article
but it still gives me size 11
This question already has an answer here:
How to specify an arbitrary (possibly non-integer) font size in LaTeX
1 answer
fontsize
fontsize
edited Feb 8 at 7:32
Jeel Shah
1,75932846
1,75932846
asked Feb 7 at 22:37
BobBob
642
642
marked as duplicate by Stefan Pinnow, Raaja, Circumscribe, Christian Hupfer, Zarko Feb 8 at 11:25
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
marked as duplicate by Stefan Pinnow, Raaja, Circumscribe, Christian Hupfer, Zarko Feb 8 at 11:25
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
8
The defaultarticle
class only has three choices10pt
,11pt
and12pt
, but you must not think of these like the little font size drop down menu in Microsoft word. These values are used to configure many aspects of the document layout, the size of subscripts and superscripts, the sizes of headings. Other font sizes are defined relative to these numbers. It's not designed to let you just choose an arbitrary value.
– Au101
Feb 7 at 22:46
1
However, you may be interested in tex.stackexchange.com/questions/47517/… tex.stackexchange.com/questions/200015/… tex.stackexchange.com/questions/340473/options-for-font-size etc.
– Au101
Feb 7 at 22:46
add a comment |
8
The defaultarticle
class only has three choices10pt
,11pt
and12pt
, but you must not think of these like the little font size drop down menu in Microsoft word. These values are used to configure many aspects of the document layout, the size of subscripts and superscripts, the sizes of headings. Other font sizes are defined relative to these numbers. It's not designed to let you just choose an arbitrary value.
– Au101
Feb 7 at 22:46
1
However, you may be interested in tex.stackexchange.com/questions/47517/… tex.stackexchange.com/questions/200015/… tex.stackexchange.com/questions/340473/options-for-font-size etc.
– Au101
Feb 7 at 22:46
8
8
The default
article
class only has three choices 10pt
, 11pt
and 12pt
, but you must not think of these like the little font size drop down menu in Microsoft word. These values are used to configure many aspects of the document layout, the size of subscripts and superscripts, the sizes of headings. Other font sizes are defined relative to these numbers. It's not designed to let you just choose an arbitrary value.– Au101
Feb 7 at 22:46
The default
article
class only has three choices 10pt
, 11pt
and 12pt
, but you must not think of these like the little font size drop down menu in Microsoft word. These values are used to configure many aspects of the document layout, the size of subscripts and superscripts, the sizes of headings. Other font sizes are defined relative to these numbers. It's not designed to let you just choose an arbitrary value.– Au101
Feb 7 at 22:46
1
1
However, you may be interested in tex.stackexchange.com/questions/47517/… tex.stackexchange.com/questions/200015/… tex.stackexchange.com/questions/340473/options-for-font-size etc.
– Au101
Feb 7 at 22:46
However, you may be interested in tex.stackexchange.com/questions/47517/… tex.stackexchange.com/questions/200015/… tex.stackexchange.com/questions/340473/options-for-font-size etc.
– Au101
Feb 7 at 22:46
add a comment |
3 Answers
3
active
oldest
votes
the options 10pt
, 11pt
and 12pt
are not lengths at all they are simply strings used as option names that suggest the size of normalsize
(although 11pt doesn't set normalsize
to 11pt, but 10.95pt)
They are the only three size related options but you can request a font of any size
fontsize11.4pt2cmselectfont
requests an 11.4pt font on a 2cm baseline.
For most fonts you will get the size requested. For reasons of historical compatibility, if you do this with the default computer modern fonts then the size will be set to one of a discrete list of sizes, however if you put
RequirePackagefix-cm
at the top of the document, this restriction will be lifted and fonts will be used at the requested size.
Note that the size options do far more than just set the font size they also specify suitable page sizes, and suitable lengths around lists and displays, and section headings etc.
add a comment |
KOMA-script allows you to specify any size for your main font, so you could use
documentclass[titlepage, fontsize=11.5pt]scrartcl
You would want to select either package fix-cm
or lmodern
to change to a font that works at non-standard sizes. Any Type1 font should also be fine.
Many font packages have an option like [scale=0.958]
or [scaled=0.958]
. (11.5/12.0 ≈ 0.958.) Finally, if you’re using fontspec
, you could do:
documentclass[titlepage, 12pt]article
usepackagefontspec
defaultfontfeaturesScale = MatchLowercase
setmainfontLatin Modern Roman[
Scale = 0.958,
Ligatures = Common, TeX]
add a comment |
You could use package srcextend
(part of the KOMA-Script bundle) together with a standard class:
RequirePackagefix-cm
documentclass[12pt]article
usepackage[fontsize=11.5pt]scrextend
makeatletter
newcommand*showfontsizef@size point
makeatother
begindocument
showfontsize
enddocument
Related: Scrartcl 13.999 point 14.4 point but not 14 point?
and Using fallback calculation to setup font sizes
add a comment |
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
the options 10pt
, 11pt
and 12pt
are not lengths at all they are simply strings used as option names that suggest the size of normalsize
(although 11pt doesn't set normalsize
to 11pt, but 10.95pt)
They are the only three size related options but you can request a font of any size
fontsize11.4pt2cmselectfont
requests an 11.4pt font on a 2cm baseline.
For most fonts you will get the size requested. For reasons of historical compatibility, if you do this with the default computer modern fonts then the size will be set to one of a discrete list of sizes, however if you put
RequirePackagefix-cm
at the top of the document, this restriction will be lifted and fonts will be used at the requested size.
Note that the size options do far more than just set the font size they also specify suitable page sizes, and suitable lengths around lists and displays, and section headings etc.
add a comment |
the options 10pt
, 11pt
and 12pt
are not lengths at all they are simply strings used as option names that suggest the size of normalsize
(although 11pt doesn't set normalsize
to 11pt, but 10.95pt)
They are the only three size related options but you can request a font of any size
fontsize11.4pt2cmselectfont
requests an 11.4pt font on a 2cm baseline.
For most fonts you will get the size requested. For reasons of historical compatibility, if you do this with the default computer modern fonts then the size will be set to one of a discrete list of sizes, however if you put
RequirePackagefix-cm
at the top of the document, this restriction will be lifted and fonts will be used at the requested size.
Note that the size options do far more than just set the font size they also specify suitable page sizes, and suitable lengths around lists and displays, and section headings etc.
add a comment |
the options 10pt
, 11pt
and 12pt
are not lengths at all they are simply strings used as option names that suggest the size of normalsize
(although 11pt doesn't set normalsize
to 11pt, but 10.95pt)
They are the only three size related options but you can request a font of any size
fontsize11.4pt2cmselectfont
requests an 11.4pt font on a 2cm baseline.
For most fonts you will get the size requested. For reasons of historical compatibility, if you do this with the default computer modern fonts then the size will be set to one of a discrete list of sizes, however if you put
RequirePackagefix-cm
at the top of the document, this restriction will be lifted and fonts will be used at the requested size.
Note that the size options do far more than just set the font size they also specify suitable page sizes, and suitable lengths around lists and displays, and section headings etc.
the options 10pt
, 11pt
and 12pt
are not lengths at all they are simply strings used as option names that suggest the size of normalsize
(although 11pt doesn't set normalsize
to 11pt, but 10.95pt)
They are the only three size related options but you can request a font of any size
fontsize11.4pt2cmselectfont
requests an 11.4pt font on a 2cm baseline.
For most fonts you will get the size requested. For reasons of historical compatibility, if you do this with the default computer modern fonts then the size will be set to one of a discrete list of sizes, however if you put
RequirePackagefix-cm
at the top of the document, this restriction will be lifted and fonts will be used at the requested size.
Note that the size options do far more than just set the font size they also specify suitable page sizes, and suitable lengths around lists and displays, and section headings etc.
edited Feb 8 at 9:27
answered Feb 7 at 23:23
David CarlisleDavid Carlisle
492k4111371885
492k4111371885
add a comment |
add a comment |
KOMA-script allows you to specify any size for your main font, so you could use
documentclass[titlepage, fontsize=11.5pt]scrartcl
You would want to select either package fix-cm
or lmodern
to change to a font that works at non-standard sizes. Any Type1 font should also be fine.
Many font packages have an option like [scale=0.958]
or [scaled=0.958]
. (11.5/12.0 ≈ 0.958.) Finally, if you’re using fontspec
, you could do:
documentclass[titlepage, 12pt]article
usepackagefontspec
defaultfontfeaturesScale = MatchLowercase
setmainfontLatin Modern Roman[
Scale = 0.958,
Ligatures = Common, TeX]
add a comment |
KOMA-script allows you to specify any size for your main font, so you could use
documentclass[titlepage, fontsize=11.5pt]scrartcl
You would want to select either package fix-cm
or lmodern
to change to a font that works at non-standard sizes. Any Type1 font should also be fine.
Many font packages have an option like [scale=0.958]
or [scaled=0.958]
. (11.5/12.0 ≈ 0.958.) Finally, if you’re using fontspec
, you could do:
documentclass[titlepage, 12pt]article
usepackagefontspec
defaultfontfeaturesScale = MatchLowercase
setmainfontLatin Modern Roman[
Scale = 0.958,
Ligatures = Common, TeX]
add a comment |
KOMA-script allows you to specify any size for your main font, so you could use
documentclass[titlepage, fontsize=11.5pt]scrartcl
You would want to select either package fix-cm
or lmodern
to change to a font that works at non-standard sizes. Any Type1 font should also be fine.
Many font packages have an option like [scale=0.958]
or [scaled=0.958]
. (11.5/12.0 ≈ 0.958.) Finally, if you’re using fontspec
, you could do:
documentclass[titlepage, 12pt]article
usepackagefontspec
defaultfontfeaturesScale = MatchLowercase
setmainfontLatin Modern Roman[
Scale = 0.958,
Ligatures = Common, TeX]
KOMA-script allows you to specify any size for your main font, so you could use
documentclass[titlepage, fontsize=11.5pt]scrartcl
You would want to select either package fix-cm
or lmodern
to change to a font that works at non-standard sizes. Any Type1 font should also be fine.
Many font packages have an option like [scale=0.958]
or [scaled=0.958]
. (11.5/12.0 ≈ 0.958.) Finally, if you’re using fontspec
, you could do:
documentclass[titlepage, 12pt]article
usepackagefontspec
defaultfontfeaturesScale = MatchLowercase
setmainfontLatin Modern Roman[
Scale = 0.958,
Ligatures = Common, TeX]
edited Feb 8 at 9:03
answered Feb 7 at 22:53
DavislorDavislor
6,4871329
6,4871329
add a comment |
add a comment |
You could use package srcextend
(part of the KOMA-Script bundle) together with a standard class:
RequirePackagefix-cm
documentclass[12pt]article
usepackage[fontsize=11.5pt]scrextend
makeatletter
newcommand*showfontsizef@size point
makeatother
begindocument
showfontsize
enddocument
Related: Scrartcl 13.999 point 14.4 point but not 14 point?
and Using fallback calculation to setup font sizes
add a comment |
You could use package srcextend
(part of the KOMA-Script bundle) together with a standard class:
RequirePackagefix-cm
documentclass[12pt]article
usepackage[fontsize=11.5pt]scrextend
makeatletter
newcommand*showfontsizef@size point
makeatother
begindocument
showfontsize
enddocument
Related: Scrartcl 13.999 point 14.4 point but not 14 point?
and Using fallback calculation to setup font sizes
add a comment |
You could use package srcextend
(part of the KOMA-Script bundle) together with a standard class:
RequirePackagefix-cm
documentclass[12pt]article
usepackage[fontsize=11.5pt]scrextend
makeatletter
newcommand*showfontsizef@size point
makeatother
begindocument
showfontsize
enddocument
Related: Scrartcl 13.999 point 14.4 point but not 14 point?
and Using fallback calculation to setup font sizes
You could use package srcextend
(part of the KOMA-Script bundle) together with a standard class:
RequirePackagefix-cm
documentclass[12pt]article
usepackage[fontsize=11.5pt]scrextend
makeatletter
newcommand*showfontsizef@size point
makeatother
begindocument
showfontsize
enddocument
Related: Scrartcl 13.999 point 14.4 point but not 14 point?
and Using fallback calculation to setup font sizes
answered Feb 8 at 8:54
esddesdd
59.5k34691
59.5k34691
add a comment |
add a comment |
8
The default
article
class only has three choices10pt
,11pt
and12pt
, but you must not think of these like the little font size drop down menu in Microsoft word. These values are used to configure many aspects of the document layout, the size of subscripts and superscripts, the sizes of headings. Other font sizes are defined relative to these numbers. It's not designed to let you just choose an arbitrary value.– Au101
Feb 7 at 22:46
1
However, you may be interested in tex.stackexchange.com/questions/47517/… tex.stackexchange.com/questions/200015/… tex.stackexchange.com/questions/340473/options-for-font-size etc.
– Au101
Feb 7 at 22:46