Can't connect to NAS Dashboard but can SSH

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP











up vote
0
down vote

favorite












I've got a WD MybookLive which has Trasnmission and sickbeard installed on it. I recently moved and re setup my network and now I can't connect to the dashboard by going by either http://mybooklive.local or by it's IP address.



I can SSH into it and I can go to the sickbeard port, but I can't get in any other way.



Any ideas?






linux ssh nas transmission







share|improve this question







New contributor




Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.



















  • How do you ssh to it (what address/port)? Does that same address work with either http or https?
    – roaima
    18 mins ago











  • @roaima I found the IP address of the device when I looked up what devices are on the network. I SSH through terminal through the root username:
    – Kevin
    14 mins ago










  • @roaima ssh root@10.14.155.141
    – Kevin
    14 mins ago










  • Does that same address work with either http or https?
    – roaima
    12 mins ago










  • @roaima I can access sickbeard through (10.14.155.141:8081) but not through https:// I used to connect to transmission through 10.14.155.141:9091 but I get a "refused to connect" message
    – Kevin
    10 mins ago














up vote
0
down vote

favorite












I've got a WD MybookLive which has Trasnmission and sickbeard installed on it. I recently moved and re setup my network and now I can't connect to the dashboard by going by either http://mybooklive.local or by it's IP address.



I can SSH into it and I can go to the sickbeard port, but I can't get in any other way.



Any ideas?






linux ssh nas transmission







share|improve this question







New contributor




Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.



















  • How do you ssh to it (what address/port)? Does that same address work with either http or https?
    – roaima
    18 mins ago











  • @roaima I found the IP address of the device when I looked up what devices are on the network. I SSH through terminal through the root username:
    – Kevin
    14 mins ago










  • @roaima ssh root@10.14.155.141
    – Kevin
    14 mins ago










  • Does that same address work with either http or https?
    – roaima
    12 mins ago










  • @roaima I can access sickbeard through (10.14.155.141:8081) but not through https:// I used to connect to transmission through 10.14.155.141:9091 but I get a "refused to connect" message
    – Kevin
    10 mins ago












up vote
0
down vote

favorite









up vote
0
down vote

favorite











I've got a WD MybookLive which has Trasnmission and sickbeard installed on it. I recently moved and re setup my network and now I can't connect to the dashboard by going by either http://mybooklive.local or by it's IP address.



I can SSH into it and I can go to the sickbeard port, but I can't get in any other way.



Any ideas?






linux ssh nas transmission







share|improve this question







New contributor




Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











I've got a WD MybookLive which has Trasnmission and sickbeard installed on it. I recently moved and re setup my network and now I can't connect to the dashboard by going by either http://mybooklive.local or by it's IP address.



I can SSH into it and I can go to the sickbeard port, but I can't get in any other way.



Any ideas?






linux ssh nas transmission




linux ssh nas transmission






share|improve this question







New contributor




Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question







New contributor




Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question






New contributor




Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 20 mins ago









Kevin

101




101




New contributor




Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Kevin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











  • How do you ssh to it (what address/port)? Does that same address work with either http or https?
    – roaima
    18 mins ago











  • @roaima I found the IP address of the device when I looked up what devices are on the network. I SSH through terminal through the root username:
    – Kevin
    14 mins ago










  • @roaima ssh root@10.14.155.141
    – Kevin
    14 mins ago










  • Does that same address work with either http or https?
    – roaima
    12 mins ago










  • @roaima I can access sickbeard through (10.14.155.141:8081) but not through https:// I used to connect to transmission through 10.14.155.141:9091 but I get a "refused to connect" message
    – Kevin
    10 mins ago
















  • How do you ssh to it (what address/port)? Does that same address work with either http or https?
    – roaima
    18 mins ago











  • @roaima I found the IP address of the device when I looked up what devices are on the network. I SSH through terminal through the root username:
    – Kevin
    14 mins ago










  • @roaima ssh root@10.14.155.141
    – Kevin
    14 mins ago










  • Does that same address work with either http or https?
    – roaima
    12 mins ago










  • @roaima I can access sickbeard through (10.14.155.141:8081) but not through https:// I used to connect to transmission through 10.14.155.141:9091 but I get a "refused to connect" message
    – Kevin
    10 mins ago















How do you ssh to it (what address/port)? Does that same address work with either http or https?
– roaima
18 mins ago





How do you ssh to it (what address/port)? Does that same address work with either http or https?
– roaima
18 mins ago













@roaima I found the IP address of the device when I looked up what devices are on the network. I SSH through terminal through the root username:
– Kevin
14 mins ago




@roaima I found the IP address of the device when I looked up what devices are on the network. I SSH through terminal through the root username:
– Kevin
14 mins ago












@roaima ssh root@10.14.155.141
– Kevin
14 mins ago




@roaima ssh root@10.14.155.141
– Kevin
14 mins ago












Does that same address work with either http or https?
– roaima
12 mins ago




Does that same address work with either http or https?
– roaima
12 mins ago












@roaima I can access sickbeard through (10.14.155.141:8081) but not through https:// I used to connect to transmission through 10.14.155.141:9091 but I get a "refused to connect" message
– Kevin
10 mins ago




@roaima I can access sickbeard through (10.14.155.141:8081) but not through https:// I used to connect to transmission through 10.14.155.141:9091 but I get a "refused to connect" message
– Kevin
10 mins ago















active

oldest

votes











Your Answer







StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);

else
createEditor();

);

function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
convertImagesToLinks: false,
noModals: false,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);



);






Kevin is a new contributor. Be nice, and check out our Code of Conduct.









 

draft saved


draft discarded


















StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f478170%2fcant-connect-to-nas-dashboard-but-can-ssh%23new-answer', 'question_page');

);

Post as a guest






















active

oldest

votes













active

oldest

votes









active

oldest

votes






active

oldest

votes








Kevin is a new contributor. Be nice, and check out our Code of Conduct.









 

draft saved


draft discarded


















Kevin is a new contributor. Be nice, and check out our Code of Conduct.












Kevin is a new contributor. Be nice, and check out our Code of Conduct.











Kevin is a new contributor. Be nice, and check out our Code of Conduct.













 


draft saved


draft discarded














StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f478170%2fcant-connect-to-nas-dashboard-but-can-ssh%23new-answer', 'question_page');

);

Post as a guest
































































-

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Read more