Lucas Arms at the East end junction with Gray's Inn Road
Cromer Street is a road in King's Cross in central London, England. It starts in the west at Judd Street, then goes east, ending at Gray's Inn Road. It gave access from Gray's Inn Road to Greenland Place and a bowling green.
Contents
1History
2Transport
3Pubs
4References
History
Sign showing the former borough
Cromer Street was formerly called Lucas Street and was renamed in 1818. In the earlier 1840s, it was described as being occupied by a class of poor 'small tradesmen and artisan lodgers' in densely crowded lodgings.[1] On it is Church of the Holy Cross, which was built by Joseph Peacock and dedicated in 1888.
105 houses were built in the street in the early 19th century, but it has largely been rebuilt and consists of over 1,000 council and housing properties, mostly pre-1919 railway tenements of fine architectural qualities on the north side, and on the south a "striking sequence of nine 6-storey slabs of flats of 1949–1951 by Hening & Chitty... They were singled out by Pevsner in 1952 as some of the first good post-war flats" The area has suffered deprivation and crime and[2] in 1996, was the subject of a £46 million regeneration project.[3] Nowadays there is a very large Bangladeshi Muslim population living in the area.[4]
Transport
The nearest tube stations are King's Cross St. Pancras, Russell Square, and Euston.
Pubs
The Boot
The street contains two pubs: The Lucas Arms at the east end, on the junction with Gray's Inn Road, and The Boot at the west end, near the junction with Judd Street. The Boot Tavern was the headquarters of the Gordon rioters and later was mentioned in Charles Dickens' book, Barnaby Rudge; it was rebuilt in 1801.[5] The Lucas Arms has been used for meetings of political organisations.[6][7]
Walter H. Godfrey and W. McB. Marcham, ed. (1952). Survey of London. vol. 24. London: Publisher: London County Council. pp. 94–95. Retrieved 28 January 2008..mw-parser-output cite.citationfont-style:inherit.mw-parser-output .citation qquotes:"""""""'""'".mw-parser-output .citation .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .citation .cs1-lock-limited a,.mw-parser-output .citation .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .citation .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-ws-icon abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/4/4c/Wikisource-logo.svg/12px-Wikisource-logo.svg.png")no-repeat;background-position:right .1em center.mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-maintdisplay:none;color:#33aa33;margin-left:0.3em.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em
^Thomas Wakley, ed. (1843). On the excess of diseases in large towns, and its causes. vol. 2. London: J. Onwhyn. p. 775. Retrieved 28 January 2008.
^The Buildings of England. London 4:North. Bridget Cherry and Nikolaus Pevsner. Yale University Press 2002
^Colquhoun, Ian (2003). Design out crime:creating safe and sustainable." communities. London: Architectural Press. p. 284. ISBN 978-0-7506-5492-0. Retrieved 28 January 2008.
^Muslims in Britain
^Alexander John Philip, William Laurence Gadd, ed. (1970). A Dickens Dictionary (2nd ed.). Ayer Publishing. p. 330. ISBN 978-0-8337-2735-0. Retrieved 28 January 2008.
^Fionnbarra Ó Dochartaigh. Ulster's White Negroes. p. 19.
^Muriel Seltman. What's Left? What's Right?: A Political Journey. p. 64.
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  | up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...