Debian 8.2 computer freezing+crashing randomly

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP












0















I have a Debian media server which seems to be crashing several times daily for no apparent reason at all. It simply freezes up, without restarting, until you manually restart it. I have uploaded the syslog here and the kern.log here
Any restart indications in the log file were done manually by me and not as a direct result of the crash.










share|improve this question
























  • Post your logs to pastebin, I would rather not download a file

    – cutrightjm
    Dec 3 '15 at 4:24











  • Just updated the links.

    – hmnd
    Dec 3 '15 at 4:35











  • Have you looked at all of the things that say "temperature alarms"? That might not be the answer, but it's a good thing to look in to at least

    – cutrightjm
    Dec 3 '15 at 4:40











  • I thought that as well. But it seems as though that sensor in particular is a virtual sensor created by lm-sensors since it always stays at 127.0°C. So it doesn't seem to be an overheating problem.

    – hmnd
    Dec 3 '15 at 5:06
















0















I have a Debian media server which seems to be crashing several times daily for no apparent reason at all. It simply freezes up, without restarting, until you manually restart it. I have uploaded the syslog here and the kern.log here
Any restart indications in the log file were done manually by me and not as a direct result of the crash.










share|improve this question
























  • Post your logs to pastebin, I would rather not download a file

    – cutrightjm
    Dec 3 '15 at 4:24











  • Just updated the links.

    – hmnd
    Dec 3 '15 at 4:35











  • Have you looked at all of the things that say "temperature alarms"? That might not be the answer, but it's a good thing to look in to at least

    – cutrightjm
    Dec 3 '15 at 4:40











  • I thought that as well. But it seems as though that sensor in particular is a virtual sensor created by lm-sensors since it always stays at 127.0°C. So it doesn't seem to be an overheating problem.

    – hmnd
    Dec 3 '15 at 5:06














0












0








0








I have a Debian media server which seems to be crashing several times daily for no apparent reason at all. It simply freezes up, without restarting, until you manually restart it. I have uploaded the syslog here and the kern.log here
Any restart indications in the log file were done manually by me and not as a direct result of the crash.










share|improve this question
















I have a Debian media server which seems to be crashing several times daily for no apparent reason at all. It simply freezes up, without restarting, until you manually restart it. I have uploaded the syslog here and the kern.log here
Any restart indications in the log file were done manually by me and not as a direct result of the crash.







debian freeze crash






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Feb 27 at 10:53









Rui F Ribeiro

41.7k1483142




41.7k1483142










asked Dec 3 '15 at 4:19









hmndhmnd

34




34












  • Post your logs to pastebin, I would rather not download a file

    – cutrightjm
    Dec 3 '15 at 4:24











  • Just updated the links.

    – hmnd
    Dec 3 '15 at 4:35











  • Have you looked at all of the things that say "temperature alarms"? That might not be the answer, but it's a good thing to look in to at least

    – cutrightjm
    Dec 3 '15 at 4:40











  • I thought that as well. But it seems as though that sensor in particular is a virtual sensor created by lm-sensors since it always stays at 127.0°C. So it doesn't seem to be an overheating problem.

    – hmnd
    Dec 3 '15 at 5:06


















  • Post your logs to pastebin, I would rather not download a file

    – cutrightjm
    Dec 3 '15 at 4:24











  • Just updated the links.

    – hmnd
    Dec 3 '15 at 4:35











  • Have you looked at all of the things that say "temperature alarms"? That might not be the answer, but it's a good thing to look in to at least

    – cutrightjm
    Dec 3 '15 at 4:40











  • I thought that as well. But it seems as though that sensor in particular is a virtual sensor created by lm-sensors since it always stays at 127.0°C. So it doesn't seem to be an overheating problem.

    – hmnd
    Dec 3 '15 at 5:06

















Post your logs to pastebin, I would rather not download a file

– cutrightjm
Dec 3 '15 at 4:24





Post your logs to pastebin, I would rather not download a file

– cutrightjm
Dec 3 '15 at 4:24













Just updated the links.

– hmnd
Dec 3 '15 at 4:35





Just updated the links.

– hmnd
Dec 3 '15 at 4:35













Have you looked at all of the things that say "temperature alarms"? That might not be the answer, but it's a good thing to look in to at least

– cutrightjm
Dec 3 '15 at 4:40





Have you looked at all of the things that say "temperature alarms"? That might not be the answer, but it's a good thing to look in to at least

– cutrightjm
Dec 3 '15 at 4:40













I thought that as well. But it seems as though that sensor in particular is a virtual sensor created by lm-sensors since it always stays at 127.0°C. So it doesn't seem to be an overheating problem.

– hmnd
Dec 3 '15 at 5:06






I thought that as well. But it seems as though that sensor in particular is a virtual sensor created by lm-sensors since it always stays at 127.0°C. So it doesn't seem to be an overheating problem.

– hmnd
Dec 3 '15 at 5:06











1 Answer
1






active

oldest

votes


















2














I don't see any explicit question here, but here's what I would do to start debugging this issue.



The first thing I do in cases like this is to run memtest86 or memtest86+ a few hours on the machine. This will rule out a lot of the common hardware errors.



If that passes, I run mprime for good measure. It will check that the CPU continues to calculate most things correctly under stress. I've had subtle errors after several hours running this, although I have not had to use it in a couple of years.



Now, if these tests passes, your hardware and cooling should be fine. After this I'd try running the system from a live CD if possible, perhaps trying an i386 version instead of amd64, to see if there's something wrong there.



If this does not give any insight, feel free to update the question with any new information!






share|improve this answer























  • There have been regular complaints about instability in Debian 8, specially from the ARM community mainly due to buggy wifi cards and temperature issues. I would uninstall all the fluff, like avahi, and upgrade to the latest kernel 4. At least, that is what I did at home.

    – Rui F Ribeiro
    Dec 3 '15 at 7:58











  • The computer in question is not running on ARM hardware.

    – pipe
    Dec 3 '15 at 8:38











  • After checking the logs to verify the CPU model I see that he is using nouveau. I have had massive problems with that on a more recent kernel. I would comment on the original post, but alas, I don't have enough virtual points here.

    – pipe
    Dec 3 '15 at 8:48












  • pipe, write the answer and I will give you points.

    – Rui F Ribeiro
    Dec 3 '15 at 8:51












  • @pipe I ran a memtest overnight, 0 errors. So do you think I should upgrade to the latest kernel, or do you have any other suggestions?

    – hmnd
    Dec 3 '15 at 22:20










Your Answer








StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);

else
createEditor();

);

function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);



);













draft saved

draft discarded


















StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f247038%2fdebian-8-2-computer-freezingcrashing-randomly%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









2














I don't see any explicit question here, but here's what I would do to start debugging this issue.



The first thing I do in cases like this is to run memtest86 or memtest86+ a few hours on the machine. This will rule out a lot of the common hardware errors.



If that passes, I run mprime for good measure. It will check that the CPU continues to calculate most things correctly under stress. I've had subtle errors after several hours running this, although I have not had to use it in a couple of years.



Now, if these tests passes, your hardware and cooling should be fine. After this I'd try running the system from a live CD if possible, perhaps trying an i386 version instead of amd64, to see if there's something wrong there.



If this does not give any insight, feel free to update the question with any new information!






share|improve this answer























  • There have been regular complaints about instability in Debian 8, specially from the ARM community mainly due to buggy wifi cards and temperature issues. I would uninstall all the fluff, like avahi, and upgrade to the latest kernel 4. At least, that is what I did at home.

    – Rui F Ribeiro
    Dec 3 '15 at 7:58











  • The computer in question is not running on ARM hardware.

    – pipe
    Dec 3 '15 at 8:38











  • After checking the logs to verify the CPU model I see that he is using nouveau. I have had massive problems with that on a more recent kernel. I would comment on the original post, but alas, I don't have enough virtual points here.

    – pipe
    Dec 3 '15 at 8:48












  • pipe, write the answer and I will give you points.

    – Rui F Ribeiro
    Dec 3 '15 at 8:51












  • @pipe I ran a memtest overnight, 0 errors. So do you think I should upgrade to the latest kernel, or do you have any other suggestions?

    – hmnd
    Dec 3 '15 at 22:20















2














I don't see any explicit question here, but here's what I would do to start debugging this issue.



The first thing I do in cases like this is to run memtest86 or memtest86+ a few hours on the machine. This will rule out a lot of the common hardware errors.



If that passes, I run mprime for good measure. It will check that the CPU continues to calculate most things correctly under stress. I've had subtle errors after several hours running this, although I have not had to use it in a couple of years.



Now, if these tests passes, your hardware and cooling should be fine. After this I'd try running the system from a live CD if possible, perhaps trying an i386 version instead of amd64, to see if there's something wrong there.



If this does not give any insight, feel free to update the question with any new information!






share|improve this answer























  • There have been regular complaints about instability in Debian 8, specially from the ARM community mainly due to buggy wifi cards and temperature issues. I would uninstall all the fluff, like avahi, and upgrade to the latest kernel 4. At least, that is what I did at home.

    – Rui F Ribeiro
    Dec 3 '15 at 7:58











  • The computer in question is not running on ARM hardware.

    – pipe
    Dec 3 '15 at 8:38











  • After checking the logs to verify the CPU model I see that he is using nouveau. I have had massive problems with that on a more recent kernel. I would comment on the original post, but alas, I don't have enough virtual points here.

    – pipe
    Dec 3 '15 at 8:48












  • pipe, write the answer and I will give you points.

    – Rui F Ribeiro
    Dec 3 '15 at 8:51












  • @pipe I ran a memtest overnight, 0 errors. So do you think I should upgrade to the latest kernel, or do you have any other suggestions?

    – hmnd
    Dec 3 '15 at 22:20













2












2








2







I don't see any explicit question here, but here's what I would do to start debugging this issue.



The first thing I do in cases like this is to run memtest86 or memtest86+ a few hours on the machine. This will rule out a lot of the common hardware errors.



If that passes, I run mprime for good measure. It will check that the CPU continues to calculate most things correctly under stress. I've had subtle errors after several hours running this, although I have not had to use it in a couple of years.



Now, if these tests passes, your hardware and cooling should be fine. After this I'd try running the system from a live CD if possible, perhaps trying an i386 version instead of amd64, to see if there's something wrong there.



If this does not give any insight, feel free to update the question with any new information!






share|improve this answer













I don't see any explicit question here, but here's what I would do to start debugging this issue.



The first thing I do in cases like this is to run memtest86 or memtest86+ a few hours on the machine. This will rule out a lot of the common hardware errors.



If that passes, I run mprime for good measure. It will check that the CPU continues to calculate most things correctly under stress. I've had subtle errors after several hours running this, although I have not had to use it in a couple of years.



Now, if these tests passes, your hardware and cooling should be fine. After this I'd try running the system from a live CD if possible, perhaps trying an i386 version instead of amd64, to see if there's something wrong there.



If this does not give any insight, feel free to update the question with any new information!







share|improve this answer












share|improve this answer



share|improve this answer










answered Dec 3 '15 at 5:29









pipepipe

316116




316116












  • There have been regular complaints about instability in Debian 8, specially from the ARM community mainly due to buggy wifi cards and temperature issues. I would uninstall all the fluff, like avahi, and upgrade to the latest kernel 4. At least, that is what I did at home.

    – Rui F Ribeiro
    Dec 3 '15 at 7:58











  • The computer in question is not running on ARM hardware.

    – pipe
    Dec 3 '15 at 8:38











  • After checking the logs to verify the CPU model I see that he is using nouveau. I have had massive problems with that on a more recent kernel. I would comment on the original post, but alas, I don't have enough virtual points here.

    – pipe
    Dec 3 '15 at 8:48












  • pipe, write the answer and I will give you points.

    – Rui F Ribeiro
    Dec 3 '15 at 8:51












  • @pipe I ran a memtest overnight, 0 errors. So do you think I should upgrade to the latest kernel, or do you have any other suggestions?

    – hmnd
    Dec 3 '15 at 22:20

















  • There have been regular complaints about instability in Debian 8, specially from the ARM community mainly due to buggy wifi cards and temperature issues. I would uninstall all the fluff, like avahi, and upgrade to the latest kernel 4. At least, that is what I did at home.

    – Rui F Ribeiro
    Dec 3 '15 at 7:58











  • The computer in question is not running on ARM hardware.

    – pipe
    Dec 3 '15 at 8:38











  • After checking the logs to verify the CPU model I see that he is using nouveau. I have had massive problems with that on a more recent kernel. I would comment on the original post, but alas, I don't have enough virtual points here.

    – pipe
    Dec 3 '15 at 8:48












  • pipe, write the answer and I will give you points.

    – Rui F Ribeiro
    Dec 3 '15 at 8:51












  • @pipe I ran a memtest overnight, 0 errors. So do you think I should upgrade to the latest kernel, or do you have any other suggestions?

    – hmnd
    Dec 3 '15 at 22:20
















There have been regular complaints about instability in Debian 8, specially from the ARM community mainly due to buggy wifi cards and temperature issues. I would uninstall all the fluff, like avahi, and upgrade to the latest kernel 4. At least, that is what I did at home.

– Rui F Ribeiro
Dec 3 '15 at 7:58





There have been regular complaints about instability in Debian 8, specially from the ARM community mainly due to buggy wifi cards and temperature issues. I would uninstall all the fluff, like avahi, and upgrade to the latest kernel 4. At least, that is what I did at home.

– Rui F Ribeiro
Dec 3 '15 at 7:58













The computer in question is not running on ARM hardware.

– pipe
Dec 3 '15 at 8:38





The computer in question is not running on ARM hardware.

– pipe
Dec 3 '15 at 8:38













After checking the logs to verify the CPU model I see that he is using nouveau. I have had massive problems with that on a more recent kernel. I would comment on the original post, but alas, I don't have enough virtual points here.

– pipe
Dec 3 '15 at 8:48






After checking the logs to verify the CPU model I see that he is using nouveau. I have had massive problems with that on a more recent kernel. I would comment on the original post, but alas, I don't have enough virtual points here.

– pipe
Dec 3 '15 at 8:48














pipe, write the answer and I will give you points.

– Rui F Ribeiro
Dec 3 '15 at 8:51






pipe, write the answer and I will give you points.

– Rui F Ribeiro
Dec 3 '15 at 8:51














@pipe I ran a memtest overnight, 0 errors. So do you think I should upgrade to the latest kernel, or do you have any other suggestions?

– hmnd
Dec 3 '15 at 22:20





@pipe I ran a memtest overnight, 0 errors. So do you think I should upgrade to the latest kernel, or do you have any other suggestions?

– hmnd
Dec 3 '15 at 22:20

















draft saved

draft discarded
















































Thanks for contributing an answer to Unix & Linux Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid


  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f247038%2fdebian-8-2-computer-freezingcrashing-randomly%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown






Popular posts from this blog

How to check contact read email or not when send email to Individual?

Displaying single band from multi-band raster using QGIS

How many registers does an x86_64 CPU actually have?