G7es torpedo


The G7es (T5) "Zaunkönig" ("wren") was an acoustic torpedo employed by German U-boats during World War II. It was called the GNAT (German Navy Acoustic Torpedo) by the British.




Contents





  • 1 Description


  • 2 Use


  • 3 See also


  • 4 Footnotes


  • 5 References


  • 6 Further reading


  • 7 External links




Description


The forerunner of the Zaunkönig was the G7e/T4 Falke, codename "Falcon," which was introduced in March 1943, but only fired by three U-boats by September of that year when the G7es (which was faster, had more range, possessed a magnetic exploder and could also be equipped with a percussion pistol) became available.


The torpedo was electric and had an effective range of 5700 metres at a speed of 24 knots (44 km/h). This torpedo employed passive acoustic homing to find its target, becoming active after a straight run of 400 metres. The homing mechanism consisted of two hydrophone receivers which sensed the sound waves of ship propellers and altered the direction of the rudder via an electropneumatic device.


There were three variants:


  • Two flat-nosed versions which contained four sets of magnetostriction hydrophones.

  • A round-nosed version which contained two magnetostriction hydrophones inside a funnel-shaped baffle.


Use


The 400 metres (1,300 ft) limit was employed for safety reasons. However, there were at least two unconfirmed instances of U-boats (U-972 in December 1943 and U-377 in January 1944) sinking after being hit by their own torpedo. This risk was later mitigated by requiring submarines to dive to 60 metres (200 ft) and go completely silent after launching acoustic torpedoes.


The first 80 TVs were delivered on 1 August 1943, and the weapon was first used in September. Despite some success, in particular sinking destroyers and corvettes, the Zaunkönig often detonated behind the enemy ship because the acoustic steering was very imprecise. This was particularly evident at its first large-scale use from 20 to 24 September 1943 in the attacks on convoy ON-202. The commanders reported a number of torpedo strikes and recorded the sinking of nine commercial steamers and 12 escort ships after the battle. In fact six merchant ships and three escort vessels, a destroyer, a frigate and a corvette were sunk. A total of 640 TVs were fired in combat, sinking 45 ships. The Zaunkönig was countered by the introduction by the Allies of the Foxer noise maker.


The Zaunkönig was nicknamed Zerstörerknacker (destroyer cracker) by the German submariners, as it was especially used against convoy escorts.



See also


  • G7e torpedo

  • List of World War II torpedoes of Germany


Footnotes







References



  • Campbell, John (2002). Naval Weapons of World War Two. Annapolis, MD: Naval Institute Press. ISBN 0-87021-459-4..mw-parser-output cite.citationfont-style:inherit.mw-parser-output qquotes:"""""""'""'".mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-limited a,.mw-parser-output .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em


  • Hellions of the Deep, Robert Gannon,
    ISBN 0-271-01508-X


  • Padfield, Peter, War Beneath the Sea Submarine Conflict 1939-1945, Pimlico 1997.
    ISBN 0-7126-7381-4


Further reading


  • Valentin Pikool, a Soviet Novelist talked about Gn7es torpedo in one of his historic novels.

  • Alan Burn frequently refers to the Gn7es "gnat" torpedoes as a major threat to the convoy escorts in his book The Fighting Captain the story of Frederic Walker RN CB DSO & the Battle of the Atlantic


External links



  • Helgason, Guðmundur. "A brief synopsis of German torpedo evolution during World War II". German U-boats of WWII - uboat.net.

  • More indepth details of G7es (TV) Acoustic Homing Torpedo at uboataces.com


-

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Se
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fix it? –
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this
Read more