Can’t attach master link
Clash Royale CLAN TAG#URR8PPP
up vote
12
down vote
favorite
I’m trying to install a chain with a snap on master link, but I can’t figure out how. I’ve tried twisting the chain as suggested by other questions to get it into place, but that doesn’t help. How do you do this? What’s the secret?
It’s a Shimano 8S CN-HG40 chain.
chain master-link
asked yesterday
EBikeRider
635
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
|
show 2 more comments
up vote
12
down vote
favorite
I’m trying to install a chain with a snap on master link, but I can’t figure out how. I’ve tried twisting the chain as suggested by other questions to get it into place, but that doesn’t help. How do you do this? What’s the secret?
It’s a Shimano 8S CN-HG40 chain.
chain master-link
asked yesterday
EBikeRider
635
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Correct me, if I'm wrong, but to me the image looks like the gap in the locking plate (on the right) is too narrow for the pins of the master link (on the left). With these snap-on master links, it must be possible to effortlessly thread either single pin through the gap/holes in the locking plate. The locking happens only through the action of both pins together.
– cmaster
yesterday
I can thread both pins through. This plate is directional, one side is labeled narrow.
– EBikeRider
yesterday
"Narrow" refers to 3/32" wide chain, as opposed to 1/8" wide chain. Since your chain is 3/32" you should have no problems with installing this master link. Silly question - you are using this master link to connect two narrow (inside) links of the chain, not the outer plates, aren't you?
– Mike
yesterday
@Mike "you should have no problems with installing this master link" Regardless of whether or not you feel they should be having problems, they are having problems. Telling somebody that their problem shouldn't exist really isn't helpful.
– David Richerby
yesterday
2
Possible duplicate of The master link that came with my chain won't fit
– Criggie
yesterday
|
show 2 more comments
up vote
12
down vote
favorite
up vote
12
down vote
favorite
I’m trying to install a chain with a snap on master link, but I can’t figure out how. I’ve tried twisting the chain as suggested by other questions to get it into place, but that doesn’t help. How do you do this? What’s the secret?
It’s a Shimano 8S CN-HG40 chain.
chain master-link
asked yesterday
EBikeRider
635
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I’m trying to install a chain with a snap on master link, but I can’t figure out how. I’ve tried twisting the chain as suggested by other questions to get it into place, but that doesn’t help. How do you do this? What’s the secret?
It’s a Shimano 8S CN-HG40 chain.
chain master-link
chain master-link
asked yesterday
EBikeRider
635
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked yesterday
EBikeRider
635
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 18 hours ago
asked yesterday
EBikeRider
635
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked yesterday
EBikeRider
635
asked yesterday
EBikeRider
635
635
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
EBikeRider is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Correct me, if I'm wrong, but to me the image looks like the gap in the locking plate (on the right) is too narrow for the pins of the master link (on the left). With these snap-on master links, it must be possible to effortlessly thread either single pin through the gap/holes in the locking plate. The locking happens only through the action of both pins together.
– cmaster
yesterday
I can thread both pins through. This plate is directional, one side is labeled narrow.
– EBikeRider
yesterday
"Narrow" refers to 3/32" wide chain, as opposed to 1/8" wide chain. Since your chain is 3/32" you should have no problems with installing this master link. Silly question - you are using this master link to connect two narrow (inside) links of the chain, not the outer plates, aren't you?
– Mike
yesterday
@Mike "you should have no problems with installing this master link" Regardless of whether or not you feel they should be having problems, they are having problems. Telling somebody that their problem shouldn't exist really isn't helpful.
– David Richerby
yesterday
2
Possible duplicate of The master link that came with my chain won't fit
– Criggie
yesterday
|
show 2 more comments
Correct me, if I'm wrong, but to me the image looks like the gap in the locking plate (on the right) is too narrow for the pins of the master link (on the left). With these snap-on master links, it must be possible to effortlessly thread either single pin through the gap/holes in the locking plate. The locking happens only through the action of both pins together.
– cmaster
yesterday
I can thread both pins through. This plate is directional, one side is labeled narrow.
– EBikeRider
yesterday
"Narrow" refers to 3/32" wide chain, as opposed to 1/8" wide chain. Since your chain is 3/32" you should have no problems with installing this master link. Silly question - you are using this master link to connect two narrow (inside) links of the chain, not the outer plates, aren't you?
– Mike
yesterday
@Mike "you should have no problems with installing this master link" Regardless of whether or not you feel they should be having problems, they are having problems. Telling somebody that their problem shouldn't exist really isn't helpful.
– David Richerby
yesterday
2
Possible duplicate of The master link that came with my chain won't fit
– Criggie
yesterday
Correct me, if I'm wrong, but to me the image looks like the gap in the locking plate (on the right) is too narrow for the pins of the master link (on the left). With these snap-on master links, it must be possible to effortlessly thread either single pin through the gap/holes in the locking plate. The locking happens only through the action of both pins together.
– cmaster
yesterday
Correct me, if I'm wrong, but to me the image looks like the gap in the locking plate (on the right) is too narrow for the pins of the master link (on the left). With these snap-on master links, it must be possible to effortlessly thread either single pin through the gap/holes in the locking plate. The locking happens only through the action of both pins together.
– cmaster
yesterday
I can thread both pins through. This plate is directional, one side is labeled narrow.
– EBikeRider
yesterday
I can thread both pins through. This plate is directional, one side is labeled narrow.
– EBikeRider
yesterday
"Narrow" refers to 3/32" wide chain, as opposed to 1/8" wide chain. Since your chain is 3/32" you should have no problems with installing this master link. Silly question - you are using this master link to connect two narrow (inside) links of the chain, not the outer plates, aren't you?
– Mike
yesterday
"Narrow" refers to 3/32" wide chain, as opposed to 1/8" wide chain. Since your chain is 3/32" you should have no problems with installing this master link. Silly question - you are using this master link to connect two narrow (inside) links of the chain, not the outer plates, aren't you?
– Mike
yesterday
@Mike "you should have no problems with installing this master link" Regardless of whether or not you feel they should be having problems, they are having problems. Telling somebody that their problem shouldn't exist really isn't helpful.
– David Richerby
yesterday
@Mike "you should have no problems with installing this master link" Regardless of whether or not you feel they should be having problems, they are having problems. Telling somebody that their problem shouldn't exist really isn't helpful.
– David Richerby
yesterday
2
2
Possible duplicate of The master link that came with my chain won't fit
– Criggie
yesterday
Possible duplicate of The master link that came with my chain won't fit
– Criggie
yesterday
|
show 2 more comments
1 Answer
1
active
oldest
votes
up vote
24
down vote
accepted
The secret is simple, you need to:
- place the master link (the part with the pins) with the opening towards you,
- bend (flex) the chain so the open ends of the pins come closer to each other,
- put the flat part of the master link,
- release the bend allowing the pins to snap into the flat part of the master link.
Since one picture saves 1000 words, they say...
The bend of the chain is a bit exaggerated, only to show the idea of the action required. One bends the chain using their hands.
And from my own experience - I prefer this type of master link over power link since linking and breaking the chain does not require literally any tools (excepto for one's hands) making it great for road-side repairs. Disengaging power link does require at least pliers (dedicated tool recommended) unless one has enormous strength at their fingertips.
answered yesterday
Mike
2,961825
This helped! I was twisting the chain instead of flexing it. The diagram is what I needed.
– EBikeRider
18 hours ago
@EBikeRider - I'm glad I could help.
– Mike
13 hours ago
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
24
down vote
accepted
The secret is simple, you need to:
- place the master link (the part with the pins) with the opening towards you,
- bend (flex) the chain so the open ends of the pins come closer to each other,
- put the flat part of the master link,
- release the bend allowing the pins to snap into the flat part of the master link.
Since one picture saves 1000 words, they say...
The bend of the chain is a bit exaggerated, only to show the idea of the action required. One bends the chain using their hands.
And from my own experience - I prefer this type of master link over power link since linking and breaking the chain does not require literally any tools (excepto for one's hands) making it great for road-side repairs. Disengaging power link does require at least pliers (dedicated tool recommended) unless one has enormous strength at their fingertips.
answered yesterday
Mike
2,961825
This helped! I was twisting the chain instead of flexing it. The diagram is what I needed.
– EBikeRider
18 hours ago
@EBikeRider - I'm glad I could help.
– Mike
13 hours ago
add a comment |
up vote
24
down vote
accepted
The secret is simple, you need to:
- place the master link (the part with the pins) with the opening towards you,
- bend (flex) the chain so the open ends of the pins come closer to each other,
- put the flat part of the master link,
- release the bend allowing the pins to snap into the flat part of the master link.
Since one picture saves 1000 words, they say...
The bend of the chain is a bit exaggerated, only to show the idea of the action required. One bends the chain using their hands.
And from my own experience - I prefer this type of master link over power link since linking and breaking the chain does not require literally any tools (excepto for one's hands) making it great for road-side repairs. Disengaging power link does require at least pliers (dedicated tool recommended) unless one has enormous strength at their fingertips.
answered yesterday
Mike
2,961825
This helped! I was twisting the chain instead of flexing it. The diagram is what I needed.
– EBikeRider
18 hours ago
@EBikeRider - I'm glad I could help.
– Mike
13 hours ago
add a comment |
up vote
24
down vote
accepted
up vote
24
down vote
accepted
The secret is simple, you need to:
- place the master link (the part with the pins) with the opening towards you,
- bend (flex) the chain so the open ends of the pins come closer to each other,
- put the flat part of the master link,
- release the bend allowing the pins to snap into the flat part of the master link.
Since one picture saves 1000 words, they say...
The bend of the chain is a bit exaggerated, only to show the idea of the action required. One bends the chain using their hands.
And from my own experience - I prefer this type of master link over power link since linking and breaking the chain does not require literally any tools (excepto for one's hands) making it great for road-side repairs. Disengaging power link does require at least pliers (dedicated tool recommended) unless one has enormous strength at their fingertips.
answered yesterday
Mike
2,961825
The secret is simple, you need to:
- place the master link (the part with the pins) with the opening towards you,
- bend (flex) the chain so the open ends of the pins come closer to each other,
- put the flat part of the master link,
- release the bend allowing the pins to snap into the flat part of the master link.
Since one picture saves 1000 words, they say...
The bend of the chain is a bit exaggerated, only to show the idea of the action required. One bends the chain using their hands.
And from my own experience - I prefer this type of master link over power link since linking and breaking the chain does not require literally any tools (excepto for one's hands) making it great for road-side repairs. Disengaging power link does require at least pliers (dedicated tool recommended) unless one has enormous strength at their fingertips.
answered yesterday
Mike
2,961825
answered yesterday
Mike
2,961825
answered yesterday
Mike
2,961825
answered yesterday
Mike
2,961825
2,961825
This helped! I was twisting the chain instead of flexing it. The diagram is what I needed.
– EBikeRider
18 hours ago
@EBikeRider - I'm glad I could help.
– Mike
13 hours ago
add a comment |
This helped! I was twisting the chain instead of flexing it. The diagram is what I needed.
– EBikeRider
18 hours ago
@EBikeRider - I'm glad I could help.
– Mike
13 hours ago
This helped! I was twisting the chain instead of flexing it. The diagram is what I needed.
– EBikeRider
18 hours ago
This helped! I was twisting the chain instead of flexing it. The diagram is what I needed.
– EBikeRider
18 hours ago
@EBikeRider - I'm glad I could help.
– Mike
13 hours ago
@EBikeRider - I'm glad I could help.
– Mike
13 hours ago
add a comment |
EBikeRider is a new contributor. Be nice, and check out our Code of Conduct.
EBikeRider is a new contributor. Be nice, and check out our Code of Conduct.
EBikeRider is a new contributor. Be nice, and check out our Code of Conduct.
EBikeRider is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58049%2fcan-t-attach-master-link%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Correct me, if I'm wrong, but to me the image looks like the gap in the locking plate (on the right) is too narrow for the pins of the master link (on the left). With these snap-on master links, it must be possible to effortlessly thread either single pin through the gap/holes in the locking plate. The locking happens only through the action of both pins together.
– cmaster
yesterday
I can thread both pins through. This plate is directional, one side is labeled narrow.
– EBikeRider
yesterday
"Narrow" refers to 3/32" wide chain, as opposed to 1/8" wide chain. Since your chain is 3/32" you should have no problems with installing this master link. Silly question - you are using this master link to connect two narrow (inside) links of the chain, not the outer plates, aren't you?
– Mike
yesterday
@Mike "you should have no problems with installing this master link" Regardless of whether or not you feel they should be having problems, they are having problems. Telling somebody that their problem shouldn't exist really isn't helpful.
– David Richerby
yesterday
2
Possible duplicate of The master link that came with my chain won't fit
– Criggie
yesterday