Identifying parts used for the escape hatch of Sariel's Tiger XL model

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP











up vote
3
down vote

favorite












I am working on a similar model of Sariel's Tiger XL in prep for my own designs of a few other German WW2 tanks, and need some help identifying a part or two.



Does anyone know what the two parts are on the left image that stands in for the escape hatch? One looks like a spanner, and the other one is behind it and circular.



build photo










share|improve this question









New contributor




mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.



















  • Great question! Welcome to Bricks.SE!
    – jncraton♦
    5 hours ago














up vote
3
down vote

favorite












I am working on a similar model of Sariel's Tiger XL in prep for my own designs of a few other German WW2 tanks, and need some help identifying a part or two.



Does anyone know what the two parts are on the left image that stands in for the escape hatch? One looks like a spanner, and the other one is behind it and circular.



build photo










share|improve this question









New contributor




mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.



















  • Great question! Welcome to Bricks.SE!
    – jncraton♦
    5 hours ago












up vote
3
down vote

favorite









up vote
3
down vote

favorite











I am working on a similar model of Sariel's Tiger XL in prep for my own designs of a few other German WW2 tanks, and need some help identifying a part or two.



Does anyone know what the two parts are on the left image that stands in for the escape hatch? One looks like a spanner, and the other one is behind it and circular.



build photo










share|improve this question









New contributor




mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











I am working on a similar model of Sariel's Tiger XL in prep for my own designs of a few other German WW2 tanks, and need some help identifying a part or two.



Does anyone know what the two parts are on the left image that stands in for the escape hatch? One looks like a spanner, and the other one is behind it and circular.



build photo







technic part-identification






share|improve this question









New contributor




mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 21 mins ago









Andrew T.

1135




1135






New contributor




mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 6 hours ago









mkfantastico

161




161




New contributor




mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






mkfantastico is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











  • Great question! Welcome to Bricks.SE!
    – jncraton♦
    5 hours ago
















  • Great question! Welcome to Bricks.SE!
    – jncraton♦
    5 hours ago















Great question! Welcome to Bricks.SE!
– jncraton♦
5 hours ago




Great question! Welcome to Bricks.SE!
– jncraton♦
5 hours ago










2 Answers
2






active

oldest

votes

















up vote
3
down vote













First three from what we can see...



enter image description here




  1. Part: 4735 Bar 1 x 3 with Clip and Stud Receptacle (Robot Arm).

enter image description here




  1. Part 2958 Technic, Disk 3 x 3.

enter image description here




  1. Part: 75c03 Hose, Rigid 3mm D. 3L / 2.4cm.

Last two hidden from view...



enter image description here




  1. Maybe 5. Part: 85861 Plate, Round 1 x 1 with Open Stud.

I can't see, but I can imagine one maybe two stacked 1x1 round plates with open studs, pierced by the flex tubing to hold up the robot arm.






share|improve this answer






















  • Great answer! That's a good call about likely having the 85861 element behind to secure it in place. It could just be held in place by the antistud on the arm, but I'm sure that Sariel designs with a lot more robustness than the MOCs that I cobble together. :)
    – jncraton♦
    9 mins ago

















up vote
2
down vote













This is actually made of three parts as far as I can tell.




  • Technic Disk 3 x 3 (2723)

Technic Disk 3 x 3




  • Bar 1 x 3 [Clip / Anti-Stud] (4735)

Bar 1 x 3



  • A cut piece of Hose, Rigid 3mm aka Flex System tubing

Hose, Rigid 3mm






share|improve this answer




















    Your Answer







    StackExchange.ready(function()
    var channelOptions =
    tags: "".split(" "),
    id: "336"
    ;
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function()
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled)
    StackExchange.using("snippets", function()
    createEditor();
    );

    else
    createEditor();

    );

    function createEditor()
    StackExchange.prepareEditor(
    heartbeatType: 'answer',
    convertImagesToLinks: false,
    noModals: false,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    noCode: true, onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    );



    );






    mkfantastico is a new contributor. Be nice, and check out our Code of Conduct.









     

    draft saved


    draft discarded


















    StackExchange.ready(
    function ()
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbricks.stackexchange.com%2fquestions%2f10420%2fidentifying-parts-used-for-the-escape-hatch-of-sariels-tiger-xl-model%23new-answer', 'question_page');

    );

    Post as a guest






























    2 Answers
    2






    active

    oldest

    votes








    2 Answers
    2






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes








    up vote
    3
    down vote













    First three from what we can see...



    enter image description here




    1. Part: 4735 Bar 1 x 3 with Clip and Stud Receptacle (Robot Arm).

    enter image description here




    1. Part 2958 Technic, Disk 3 x 3.

    enter image description here




    1. Part: 75c03 Hose, Rigid 3mm D. 3L / 2.4cm.

    Last two hidden from view...



    enter image description here




    1. Maybe 5. Part: 85861 Plate, Round 1 x 1 with Open Stud.

    I can't see, but I can imagine one maybe two stacked 1x1 round plates with open studs, pierced by the flex tubing to hold up the robot arm.






    share|improve this answer






















    • Great answer! That's a good call about likely having the 85861 element behind to secure it in place. It could just be held in place by the antistud on the arm, but I'm sure that Sariel designs with a lot more robustness than the MOCs that I cobble together. :)
      – jncraton♦
      9 mins ago














    up vote
    3
    down vote













    First three from what we can see...



    enter image description here




    1. Part: 4735 Bar 1 x 3 with Clip and Stud Receptacle (Robot Arm).

    enter image description here




    1. Part 2958 Technic, Disk 3 x 3.

    enter image description here




    1. Part: 75c03 Hose, Rigid 3mm D. 3L / 2.4cm.

    Last two hidden from view...



    enter image description here




    1. Maybe 5. Part: 85861 Plate, Round 1 x 1 with Open Stud.

    I can't see, but I can imagine one maybe two stacked 1x1 round plates with open studs, pierced by the flex tubing to hold up the robot arm.






    share|improve this answer






















    • Great answer! That's a good call about likely having the 85861 element behind to secure it in place. It could just be held in place by the antistud on the arm, but I'm sure that Sariel designs with a lot more robustness than the MOCs that I cobble together. :)
      – jncraton♦
      9 mins ago












    up vote
    3
    down vote










    up vote
    3
    down vote









    First three from what we can see...



    enter image description here




    1. Part: 4735 Bar 1 x 3 with Clip and Stud Receptacle (Robot Arm).

    enter image description here




    1. Part 2958 Technic, Disk 3 x 3.

    enter image description here




    1. Part: 75c03 Hose, Rigid 3mm D. 3L / 2.4cm.

    Last two hidden from view...



    enter image description here




    1. Maybe 5. Part: 85861 Plate, Round 1 x 1 with Open Stud.

    I can't see, but I can imagine one maybe two stacked 1x1 round plates with open studs, pierced by the flex tubing to hold up the robot arm.






    share|improve this answer














    First three from what we can see...



    enter image description here




    1. Part: 4735 Bar 1 x 3 with Clip and Stud Receptacle (Robot Arm).

    enter image description here




    1. Part 2958 Technic, Disk 3 x 3.

    enter image description here




    1. Part: 75c03 Hose, Rigid 3mm D. 3L / 2.4cm.

    Last two hidden from view...



    enter image description here




    1. Maybe 5. Part: 85861 Plate, Round 1 x 1 with Open Stud.

    I can't see, but I can imagine one maybe two stacked 1x1 round plates with open studs, pierced by the flex tubing to hold up the robot arm.







    share|improve this answer














    share|improve this answer



    share|improve this answer








    edited 15 mins ago









    jncraton♦

    17.7k44897




    17.7k44897










    answered 4 hours ago









    Rin Rio-Oki

    1,2451411




    1,2451411











    • Great answer! That's a good call about likely having the 85861 element behind to secure it in place. It could just be held in place by the antistud on the arm, but I'm sure that Sariel designs with a lot more robustness than the MOCs that I cobble together. :)
      – jncraton♦
      9 mins ago
















    • Great answer! That's a good call about likely having the 85861 element behind to secure it in place. It could just be held in place by the antistud on the arm, but I'm sure that Sariel designs with a lot more robustness than the MOCs that I cobble together. :)
      – jncraton♦
      9 mins ago















    Great answer! That's a good call about likely having the 85861 element behind to secure it in place. It could just be held in place by the antistud on the arm, but I'm sure that Sariel designs with a lot more robustness than the MOCs that I cobble together. :)
    – jncraton♦
    9 mins ago




    Great answer! That's a good call about likely having the 85861 element behind to secure it in place. It could just be held in place by the antistud on the arm, but I'm sure that Sariel designs with a lot more robustness than the MOCs that I cobble together. :)
    – jncraton♦
    9 mins ago










    up vote
    2
    down vote













    This is actually made of three parts as far as I can tell.




    • Technic Disk 3 x 3 (2723)

    Technic Disk 3 x 3




    • Bar 1 x 3 [Clip / Anti-Stud] (4735)

    Bar 1 x 3



    • A cut piece of Hose, Rigid 3mm aka Flex System tubing

    Hose, Rigid 3mm






    share|improve this answer
























      up vote
      2
      down vote













      This is actually made of three parts as far as I can tell.




      • Technic Disk 3 x 3 (2723)

      Technic Disk 3 x 3




      • Bar 1 x 3 [Clip / Anti-Stud] (4735)

      Bar 1 x 3



      • A cut piece of Hose, Rigid 3mm aka Flex System tubing

      Hose, Rigid 3mm






      share|improve this answer






















        up vote
        2
        down vote










        up vote
        2
        down vote









        This is actually made of three parts as far as I can tell.




        • Technic Disk 3 x 3 (2723)

        Technic Disk 3 x 3




        • Bar 1 x 3 [Clip / Anti-Stud] (4735)

        Bar 1 x 3



        • A cut piece of Hose, Rigid 3mm aka Flex System tubing

        Hose, Rigid 3mm






        share|improve this answer












        This is actually made of three parts as far as I can tell.




        • Technic Disk 3 x 3 (2723)

        Technic Disk 3 x 3




        • Bar 1 x 3 [Clip / Anti-Stud] (4735)

        Bar 1 x 3



        • A cut piece of Hose, Rigid 3mm aka Flex System tubing

        Hose, Rigid 3mm







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered 5 hours ago









        jncraton♦

        17.7k44897




        17.7k44897




















            mkfantastico is a new contributor. Be nice, and check out our Code of Conduct.









             

            draft saved


            draft discarded


















            mkfantastico is a new contributor. Be nice, and check out our Code of Conduct.












            mkfantastico is a new contributor. Be nice, and check out our Code of Conduct.











            mkfantastico is a new contributor. Be nice, and check out our Code of Conduct.













             


            draft saved


            draft discarded














            StackExchange.ready(
            function ()
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbricks.stackexchange.com%2fquestions%2f10420%2fidentifying-parts-used-for-the-escape-hatch-of-sariels-tiger-xl-model%23new-answer', 'question_page');

            );

            Post as a guest













































































            Popular posts from this blog

            How to check contact read email or not when send email to Individual?

            Displaying single band from multi-band raster using QGIS

            How many registers does an x86_64 CPU actually have?