Why can't we make a perpetual motion machine by using a magnet to pull up a piece of metal, then letting it fall back down? [duplicate]

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP












11












$begingroup$



This question already has an answer here:



  • Why doesn't this magnetic perpetual motion machine work?

    5 answers



Obviously, a perpetuum mobile isn't possible by any law in physics, because energy can't be "created" or "destroyed", only transformed.
This said, I've had an idea for a perpetuum mobile and can't seem to find my mistake (I'm actually very close to building and trying it).



Here's the plan:



Take a piece of wood and attach its upper end to a screw so it can swing like a pendulum. Then, attach a magnetic metal at the lower end of the wood. Now, place two magnets at each side of the pendulum, so that at the maximum amplitude, the metal will barely touch the magnets and will swing back, due to its weight.
Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit. Thus, on the "way back", it will have a slightly higher amplitude. So it swings to the other side, closer to the magnet, which will pull the pendulum a bit more upwards, thus increasing the amplitude furthermore.
This could theoretically go on and the pendulum will never stop, it will actually gain more momentum at the start.



So the conditions are:



  • The Metal must be heavy enough so it doesn't stick to the magnets

  • The Metal must be magnetic enough so that we gain amplitude instead of losing it each swing

And that's basically it. I am aware that the construction couldn't work, but struggle to find where I made my mistake.
Anyways, if it does work and you guys build it before I do: I want 50% of all profits and want you to name it Perpenduluum Mobile :D










share|cite|improve this question











$endgroup$



marked as duplicate by knzhou, GiorgioP, Jon Custer, Bill N, John Rennie electromagnetism
Users with the  electromagnetism badge can single-handedly close electromagnetism questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
Mar 7 at 7:50


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

















  • $begingroup$
    Comments are not for extended discussion; this conversation has been moved to chat.
    $endgroup$
    – David Z
    Mar 6 at 0:09






  • 4




    $begingroup$
    Possible duplicate of Why doesn't this magnetic perpetual motion machine work? (Of course the mechanism isn't exactly the same, but I think it falls into the same family of misconceptions.)
    $endgroup$
    – knzhou
    Mar 6 at 14:23











  • $begingroup$
    I recommend you do try to build your machine. You know from the answers here that it won't be perpetual motion, but actually trying it out could help you really understand why.
    $endgroup$
    – iamnotmaynard
    Mar 6 at 15:26










  • $begingroup$
    will do, I'll be posting updates here and tell you what happened :D
    $endgroup$
    – Florian Claaßen
    Mar 6 at 15:28










  • $begingroup$
    I can save you the time. My father was always a fan of these types of machines (despite the best attempts of everyone around him to convince him they wouldn't work), and once built a large pendulum device very similar to yours. Of course the result was that no matter how it was adjusted, the pendulum came to rest at some point, usually a little off-center.
    $endgroup$
    – Paul Sinclair
    Mar 6 at 18:07















11












$begingroup$



This question already has an answer here:



  • Why doesn't this magnetic perpetual motion machine work?

    5 answers



Obviously, a perpetuum mobile isn't possible by any law in physics, because energy can't be "created" or "destroyed", only transformed.
This said, I've had an idea for a perpetuum mobile and can't seem to find my mistake (I'm actually very close to building and trying it).



Here's the plan:



Take a piece of wood and attach its upper end to a screw so it can swing like a pendulum. Then, attach a magnetic metal at the lower end of the wood. Now, place two magnets at each side of the pendulum, so that at the maximum amplitude, the metal will barely touch the magnets and will swing back, due to its weight.
Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit. Thus, on the "way back", it will have a slightly higher amplitude. So it swings to the other side, closer to the magnet, which will pull the pendulum a bit more upwards, thus increasing the amplitude furthermore.
This could theoretically go on and the pendulum will never stop, it will actually gain more momentum at the start.



So the conditions are:



  • The Metal must be heavy enough so it doesn't stick to the magnets

  • The Metal must be magnetic enough so that we gain amplitude instead of losing it each swing

And that's basically it. I am aware that the construction couldn't work, but struggle to find where I made my mistake.
Anyways, if it does work and you guys build it before I do: I want 50% of all profits and want you to name it Perpenduluum Mobile :D










share|cite|improve this question











$endgroup$



marked as duplicate by knzhou, GiorgioP, Jon Custer, Bill N, John Rennie electromagnetism
Users with the  electromagnetism badge can single-handedly close electromagnetism questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
Mar 7 at 7:50


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

















  • $begingroup$
    Comments are not for extended discussion; this conversation has been moved to chat.
    $endgroup$
    – David Z
    Mar 6 at 0:09






  • 4




    $begingroup$
    Possible duplicate of Why doesn't this magnetic perpetual motion machine work? (Of course the mechanism isn't exactly the same, but I think it falls into the same family of misconceptions.)
    $endgroup$
    – knzhou
    Mar 6 at 14:23











  • $begingroup$
    I recommend you do try to build your machine. You know from the answers here that it won't be perpetual motion, but actually trying it out could help you really understand why.
    $endgroup$
    – iamnotmaynard
    Mar 6 at 15:26










  • $begingroup$
    will do, I'll be posting updates here and tell you what happened :D
    $endgroup$
    – Florian Claaßen
    Mar 6 at 15:28










  • $begingroup$
    I can save you the time. My father was always a fan of these types of machines (despite the best attempts of everyone around him to convince him they wouldn't work), and once built a large pendulum device very similar to yours. Of course the result was that no matter how it was adjusted, the pendulum came to rest at some point, usually a little off-center.
    $endgroup$
    – Paul Sinclair
    Mar 6 at 18:07













11












11








11


2



$begingroup$



This question already has an answer here:



  • Why doesn't this magnetic perpetual motion machine work?

    5 answers



Obviously, a perpetuum mobile isn't possible by any law in physics, because energy can't be "created" or "destroyed", only transformed.
This said, I've had an idea for a perpetuum mobile and can't seem to find my mistake (I'm actually very close to building and trying it).



Here's the plan:



Take a piece of wood and attach its upper end to a screw so it can swing like a pendulum. Then, attach a magnetic metal at the lower end of the wood. Now, place two magnets at each side of the pendulum, so that at the maximum amplitude, the metal will barely touch the magnets and will swing back, due to its weight.
Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit. Thus, on the "way back", it will have a slightly higher amplitude. So it swings to the other side, closer to the magnet, which will pull the pendulum a bit more upwards, thus increasing the amplitude furthermore.
This could theoretically go on and the pendulum will never stop, it will actually gain more momentum at the start.



So the conditions are:



  • The Metal must be heavy enough so it doesn't stick to the magnets

  • The Metal must be magnetic enough so that we gain amplitude instead of losing it each swing

And that's basically it. I am aware that the construction couldn't work, but struggle to find where I made my mistake.
Anyways, if it does work and you guys build it before I do: I want 50% of all profits and want you to name it Perpenduluum Mobile :D










share|cite|improve this question











$endgroup$





This question already has an answer here:



  • Why doesn't this magnetic perpetual motion machine work?

    5 answers



Obviously, a perpetuum mobile isn't possible by any law in physics, because energy can't be "created" or "destroyed", only transformed.
This said, I've had an idea for a perpetuum mobile and can't seem to find my mistake (I'm actually very close to building and trying it).



Here's the plan:



Take a piece of wood and attach its upper end to a screw so it can swing like a pendulum. Then, attach a magnetic metal at the lower end of the wood. Now, place two magnets at each side of the pendulum, so that at the maximum amplitude, the metal will barely touch the magnets and will swing back, due to its weight.
Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit. Thus, on the "way back", it will have a slightly higher amplitude. So it swings to the other side, closer to the magnet, which will pull the pendulum a bit more upwards, thus increasing the amplitude furthermore.
This could theoretically go on and the pendulum will never stop, it will actually gain more momentum at the start.



So the conditions are:



  • The Metal must be heavy enough so it doesn't stick to the magnets

  • The Metal must be magnetic enough so that we gain amplitude instead of losing it each swing

And that's basically it. I am aware that the construction couldn't work, but struggle to find where I made my mistake.
Anyways, if it does work and you guys build it before I do: I want 50% of all profits and want you to name it Perpenduluum Mobile :D





This question already has an answer here:



  • Why doesn't this magnetic perpetual motion machine work?

    5 answers







newtonian-mechanics electromagnetism energy-conservation dissipation perpetual-motion






share|cite|improve this question















share|cite|improve this question













share|cite|improve this question




share|cite|improve this question








edited Mar 5 at 16:55









knzhou

45.6k11122220




45.6k11122220










asked Mar 5 at 11:03









Florian ClaaßenFlorian Claaßen

17616




17616




marked as duplicate by knzhou, GiorgioP, Jon Custer, Bill N, John Rennie electromagnetism
Users with the  electromagnetism badge can single-handedly close electromagnetism questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
Mar 7 at 7:50


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.









marked as duplicate by knzhou, GiorgioP, Jon Custer, Bill N, John Rennie electromagnetism
Users with the  electromagnetism badge can single-handedly close electromagnetism questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
Mar 7 at 7:50


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.













  • $begingroup$
    Comments are not for extended discussion; this conversation has been moved to chat.
    $endgroup$
    – David Z
    Mar 6 at 0:09






  • 4




    $begingroup$
    Possible duplicate of Why doesn't this magnetic perpetual motion machine work? (Of course the mechanism isn't exactly the same, but I think it falls into the same family of misconceptions.)
    $endgroup$
    – knzhou
    Mar 6 at 14:23











  • $begingroup$
    I recommend you do try to build your machine. You know from the answers here that it won't be perpetual motion, but actually trying it out could help you really understand why.
    $endgroup$
    – iamnotmaynard
    Mar 6 at 15:26










  • $begingroup$
    will do, I'll be posting updates here and tell you what happened :D
    $endgroup$
    – Florian Claaßen
    Mar 6 at 15:28










  • $begingroup$
    I can save you the time. My father was always a fan of these types of machines (despite the best attempts of everyone around him to convince him they wouldn't work), and once built a large pendulum device very similar to yours. Of course the result was that no matter how it was adjusted, the pendulum came to rest at some point, usually a little off-center.
    $endgroup$
    – Paul Sinclair
    Mar 6 at 18:07
















  • $begingroup$
    Comments are not for extended discussion; this conversation has been moved to chat.
    $endgroup$
    – David Z
    Mar 6 at 0:09






  • 4




    $begingroup$
    Possible duplicate of Why doesn't this magnetic perpetual motion machine work? (Of course the mechanism isn't exactly the same, but I think it falls into the same family of misconceptions.)
    $endgroup$
    – knzhou
    Mar 6 at 14:23











  • $begingroup$
    I recommend you do try to build your machine. You know from the answers here that it won't be perpetual motion, but actually trying it out could help you really understand why.
    $endgroup$
    – iamnotmaynard
    Mar 6 at 15:26










  • $begingroup$
    will do, I'll be posting updates here and tell you what happened :D
    $endgroup$
    – Florian Claaßen
    Mar 6 at 15:28










  • $begingroup$
    I can save you the time. My father was always a fan of these types of machines (despite the best attempts of everyone around him to convince him they wouldn't work), and once built a large pendulum device very similar to yours. Of course the result was that no matter how it was adjusted, the pendulum came to rest at some point, usually a little off-center.
    $endgroup$
    – Paul Sinclair
    Mar 6 at 18:07















$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– David Z
Mar 6 at 0:09




$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– David Z
Mar 6 at 0:09




4




4




$begingroup$
Possible duplicate of Why doesn't this magnetic perpetual motion machine work? (Of course the mechanism isn't exactly the same, but I think it falls into the same family of misconceptions.)
$endgroup$
– knzhou
Mar 6 at 14:23





$begingroup$
Possible duplicate of Why doesn't this magnetic perpetual motion machine work? (Of course the mechanism isn't exactly the same, but I think it falls into the same family of misconceptions.)
$endgroup$
– knzhou
Mar 6 at 14:23













$begingroup$
I recommend you do try to build your machine. You know from the answers here that it won't be perpetual motion, but actually trying it out could help you really understand why.
$endgroup$
– iamnotmaynard
Mar 6 at 15:26




$begingroup$
I recommend you do try to build your machine. You know from the answers here that it won't be perpetual motion, but actually trying it out could help you really understand why.
$endgroup$
– iamnotmaynard
Mar 6 at 15:26












$begingroup$
will do, I'll be posting updates here and tell you what happened :D
$endgroup$
– Florian Claaßen
Mar 6 at 15:28




$begingroup$
will do, I'll be posting updates here and tell you what happened :D
$endgroup$
– Florian Claaßen
Mar 6 at 15:28












$begingroup$
I can save you the time. My father was always a fan of these types of machines (despite the best attempts of everyone around him to convince him they wouldn't work), and once built a large pendulum device very similar to yours. Of course the result was that no matter how it was adjusted, the pendulum came to rest at some point, usually a little off-center.
$endgroup$
– Paul Sinclair
Mar 6 at 18:07




$begingroup$
I can save you the time. My father was always a fan of these types of machines (despite the best attempts of everyone around him to convince him they wouldn't work), and once built a large pendulum device very similar to yours. Of course the result was that no matter how it was adjusted, the pendulum came to rest at some point, usually a little off-center.
$endgroup$
– Paul Sinclair
Mar 6 at 18:07










3 Answers
3






active

oldest

votes


















70












$begingroup$


Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit.




You've neglected to account for the magnetic attraction as the pendulum bob goes back to its central position.



On the outwards leg, you are correct that the magnet's attraction will pull on the bob and give it more energy than it would have in the absence of the magnet. However, in the return leg, the pendulum bob is trying to get away from the magnet's attractive force, and this will claim back all of the additional energy.



(... if the system is perfect, that is. Real-world magnetic materials will show some amount of hysteresis, so the bob will lose slightly more energy on the way back than it gained on the way out.)



This type of mistake is quite common when you have a core dynamics which is known to be conservative, and still seems to be producing energy - you're just conveniently neglecting to take into account the parts of the cycle where that force performs work against your system. For a similar example in action, see What prevents this magnetic perpetuum mobile from working?.






share|cite|improve this answer









$endgroup$








  • 1




    $begingroup$
    Thanks, I didn't think of that. Your absolutely right, but let me propose a solution to the problem: What if I replace the magnets with electromagnets which get powered by the dynamo that gets charged by the pendulum swinging. Now, what if the electromagnet gets powered when the pendulum is swinging towards it, but not powered once the pendulum swings away?
    $endgroup$
    – Florian Claaßen
    Mar 5 at 13:30







  • 26




    $begingroup$
    Then you will need to supply power to the electromagnet when you turn it on, and you will not be able to harvest equal amounts of power from the electromagnet when you turn it off. Let's get this straight: electromagnetism conserves energy. That's a theorem within the theory, and the only way you can get around it is by stepping away from electromagnetism. The fact that perpetual-motion machines don't work is not a "problem" in need of a "solution", and if that's what you're looking for, then this site is not the venue for it.
    $endgroup$
    – Emilio Pisanty
    Mar 5 at 13:37






  • 2




    $begingroup$
    Right, right, thanks for the quick response. I was not looking for an actual perpetuum mobile but rather the mistake I made while thinking up the model. You have been of great help, thanks :)
    $endgroup$
    – Florian Claaßen
    Mar 5 at 13:39






  • 10




    $begingroup$
    No worries. When asking about perpetual-motion machines, you should keep firmly in mind the type of population that asks the majority of those questions. If your text reads the same way as the comments by that population (which your first comment here definitely satisfies), then you should be prepared for others' view of those questions to come through such a lens. For an example of how to step away from that tone, see the question I linked to.
    $endgroup$
    – Emilio Pisanty
    Mar 5 at 13:42


















4












$begingroup$

Perpetual motion is impossible due to dissipation, or if you prefer second principle of thermodynamics and not to energy conservation.



If your analysis of the suggested setup was correct, you could create mechanical energy for free !



In first analysis, neglecting the (unavoidable) losses in the ferromagnetic medium, your system is conservative : what you have is a modified pendulum, where the confinement potential contains not only the gravitational part but also a magnetic component. Actually the magnetic force slightly decrease the recall torque that you would have with gravity alone, and the amplitude of motion will indeed be larger. But you nevertheless will have a turning point where the kinetic energy vanishes, and when going back, you will reach exactly the same angle for the turning point on the other side.
This correspond to an oscillator with constant amplitude, because losses have been neglected.
The sources of losses are at least : friction in air, friction on axe, ferromagnetic hysteresis, Foucault currents. So the amplitude will decrease and the perpetual motion be reduced to perpetual immobility...






share|cite|improve this answer











$endgroup$












  • $begingroup$
    The key thing is that the forces are conservative, as you say. If the forces are conservative there is a well-defined potential energy at any angle $theta$ and that's basically all you need.
    $endgroup$
    – tfb
    Mar 5 at 12:08










  • $begingroup$
    @TV I agree of course but it is worth to discuss in more detail the misconceptions involved in the OP. And magnets remains so mysterious, if not magical, for many people...
    $endgroup$
    – Jhor
    Mar 5 at 12:11










  • $begingroup$
    Oh yes, sorry, I only really added the comment as I was half-way through an answer which said that (now abandoned as yours is better).
    $endgroup$
    – tfb
    Mar 5 at 13:04


















0












$begingroup$

You are missing that as the metal passes through the changing magnetic field, Eddy currents will be produced.



These currents will result in the metal heating up (with the amount depending on the speed of travel and strength of field).



This heating essentially results in energy being removed from the system; and thus the bobbing can not be done forever; even if the rest of the system is perfect.






share|cite|improve this answer









$endgroup$



















    3 Answers
    3






    active

    oldest

    votes








    3 Answers
    3






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    70












    $begingroup$


    Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit.




    You've neglected to account for the magnetic attraction as the pendulum bob goes back to its central position.



    On the outwards leg, you are correct that the magnet's attraction will pull on the bob and give it more energy than it would have in the absence of the magnet. However, in the return leg, the pendulum bob is trying to get away from the magnet's attractive force, and this will claim back all of the additional energy.



    (... if the system is perfect, that is. Real-world magnetic materials will show some amount of hysteresis, so the bob will lose slightly more energy on the way back than it gained on the way out.)



    This type of mistake is quite common when you have a core dynamics which is known to be conservative, and still seems to be producing energy - you're just conveniently neglecting to take into account the parts of the cycle where that force performs work against your system. For a similar example in action, see What prevents this magnetic perpetuum mobile from working?.






    share|cite|improve this answer









    $endgroup$








    • 1




      $begingroup$
      Thanks, I didn't think of that. Your absolutely right, but let me propose a solution to the problem: What if I replace the magnets with electromagnets which get powered by the dynamo that gets charged by the pendulum swinging. Now, what if the electromagnet gets powered when the pendulum is swinging towards it, but not powered once the pendulum swings away?
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:30







    • 26




      $begingroup$
      Then you will need to supply power to the electromagnet when you turn it on, and you will not be able to harvest equal amounts of power from the electromagnet when you turn it off. Let's get this straight: electromagnetism conserves energy. That's a theorem within the theory, and the only way you can get around it is by stepping away from electromagnetism. The fact that perpetual-motion machines don't work is not a "problem" in need of a "solution", and if that's what you're looking for, then this site is not the venue for it.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:37






    • 2




      $begingroup$
      Right, right, thanks for the quick response. I was not looking for an actual perpetuum mobile but rather the mistake I made while thinking up the model. You have been of great help, thanks :)
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:39






    • 10




      $begingroup$
      No worries. When asking about perpetual-motion machines, you should keep firmly in mind the type of population that asks the majority of those questions. If your text reads the same way as the comments by that population (which your first comment here definitely satisfies), then you should be prepared for others' view of those questions to come through such a lens. For an example of how to step away from that tone, see the question I linked to.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:42















    70












    $begingroup$


    Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit.




    You've neglected to account for the magnetic attraction as the pendulum bob goes back to its central position.



    On the outwards leg, you are correct that the magnet's attraction will pull on the bob and give it more energy than it would have in the absence of the magnet. However, in the return leg, the pendulum bob is trying to get away from the magnet's attractive force, and this will claim back all of the additional energy.



    (... if the system is perfect, that is. Real-world magnetic materials will show some amount of hysteresis, so the bob will lose slightly more energy on the way back than it gained on the way out.)



    This type of mistake is quite common when you have a core dynamics which is known to be conservative, and still seems to be producing energy - you're just conveniently neglecting to take into account the parts of the cycle where that force performs work against your system. For a similar example in action, see What prevents this magnetic perpetuum mobile from working?.






    share|cite|improve this answer









    $endgroup$








    • 1




      $begingroup$
      Thanks, I didn't think of that. Your absolutely right, but let me propose a solution to the problem: What if I replace the magnets with electromagnets which get powered by the dynamo that gets charged by the pendulum swinging. Now, what if the electromagnet gets powered when the pendulum is swinging towards it, but not powered once the pendulum swings away?
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:30







    • 26




      $begingroup$
      Then you will need to supply power to the electromagnet when you turn it on, and you will not be able to harvest equal amounts of power from the electromagnet when you turn it off. Let's get this straight: electromagnetism conserves energy. That's a theorem within the theory, and the only way you can get around it is by stepping away from electromagnetism. The fact that perpetual-motion machines don't work is not a "problem" in need of a "solution", and if that's what you're looking for, then this site is not the venue for it.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:37






    • 2




      $begingroup$
      Right, right, thanks for the quick response. I was not looking for an actual perpetuum mobile but rather the mistake I made while thinking up the model. You have been of great help, thanks :)
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:39






    • 10




      $begingroup$
      No worries. When asking about perpetual-motion machines, you should keep firmly in mind the type of population that asks the majority of those questions. If your text reads the same way as the comments by that population (which your first comment here definitely satisfies), then you should be prepared for others' view of those questions to come through such a lens. For an example of how to step away from that tone, see the question I linked to.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:42













    70












    70








    70





    $begingroup$


    Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit.




    You've neglected to account for the magnetic attraction as the pendulum bob goes back to its central position.



    On the outwards leg, you are correct that the magnet's attraction will pull on the bob and give it more energy than it would have in the absence of the magnet. However, in the return leg, the pendulum bob is trying to get away from the magnet's attractive force, and this will claim back all of the additional energy.



    (... if the system is perfect, that is. Real-world magnetic materials will show some amount of hysteresis, so the bob will lose slightly more energy on the way back than it gained on the way out.)



    This type of mistake is quite common when you have a core dynamics which is known to be conservative, and still seems to be producing energy - you're just conveniently neglecting to take into account the parts of the cycle where that force performs work against your system. For a similar example in action, see What prevents this magnetic perpetuum mobile from working?.






    share|cite|improve this answer









    $endgroup$




    Now, in my head, if you give the pendulum a little impulse, it will swing up in one direction and get attracted by the magnet just a tiny bit.




    You've neglected to account for the magnetic attraction as the pendulum bob goes back to its central position.



    On the outwards leg, you are correct that the magnet's attraction will pull on the bob and give it more energy than it would have in the absence of the magnet. However, in the return leg, the pendulum bob is trying to get away from the magnet's attractive force, and this will claim back all of the additional energy.



    (... if the system is perfect, that is. Real-world magnetic materials will show some amount of hysteresis, so the bob will lose slightly more energy on the way back than it gained on the way out.)



    This type of mistake is quite common when you have a core dynamics which is known to be conservative, and still seems to be producing energy - you're just conveniently neglecting to take into account the parts of the cycle where that force performs work against your system. For a similar example in action, see What prevents this magnetic perpetuum mobile from working?.







    share|cite|improve this answer












    share|cite|improve this answer



    share|cite|improve this answer










    answered Mar 5 at 12:43









    Emilio PisantyEmilio Pisanty

    86.3k23214434




    86.3k23214434







    • 1




      $begingroup$
      Thanks, I didn't think of that. Your absolutely right, but let me propose a solution to the problem: What if I replace the magnets with electromagnets which get powered by the dynamo that gets charged by the pendulum swinging. Now, what if the electromagnet gets powered when the pendulum is swinging towards it, but not powered once the pendulum swings away?
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:30







    • 26




      $begingroup$
      Then you will need to supply power to the electromagnet when you turn it on, and you will not be able to harvest equal amounts of power from the electromagnet when you turn it off. Let's get this straight: electromagnetism conserves energy. That's a theorem within the theory, and the only way you can get around it is by stepping away from electromagnetism. The fact that perpetual-motion machines don't work is not a "problem" in need of a "solution", and if that's what you're looking for, then this site is not the venue for it.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:37






    • 2




      $begingroup$
      Right, right, thanks for the quick response. I was not looking for an actual perpetuum mobile but rather the mistake I made while thinking up the model. You have been of great help, thanks :)
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:39






    • 10




      $begingroup$
      No worries. When asking about perpetual-motion machines, you should keep firmly in mind the type of population that asks the majority of those questions. If your text reads the same way as the comments by that population (which your first comment here definitely satisfies), then you should be prepared for others' view of those questions to come through such a lens. For an example of how to step away from that tone, see the question I linked to.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:42












    • 1




      $begingroup$
      Thanks, I didn't think of that. Your absolutely right, but let me propose a solution to the problem: What if I replace the magnets with electromagnets which get powered by the dynamo that gets charged by the pendulum swinging. Now, what if the electromagnet gets powered when the pendulum is swinging towards it, but not powered once the pendulum swings away?
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:30







    • 26




      $begingroup$
      Then you will need to supply power to the electromagnet when you turn it on, and you will not be able to harvest equal amounts of power from the electromagnet when you turn it off. Let's get this straight: electromagnetism conserves energy. That's a theorem within the theory, and the only way you can get around it is by stepping away from electromagnetism. The fact that perpetual-motion machines don't work is not a "problem" in need of a "solution", and if that's what you're looking for, then this site is not the venue for it.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:37






    • 2




      $begingroup$
      Right, right, thanks for the quick response. I was not looking for an actual perpetuum mobile but rather the mistake I made while thinking up the model. You have been of great help, thanks :)
      $endgroup$
      – Florian Claaßen
      Mar 5 at 13:39






    • 10




      $begingroup$
      No worries. When asking about perpetual-motion machines, you should keep firmly in mind the type of population that asks the majority of those questions. If your text reads the same way as the comments by that population (which your first comment here definitely satisfies), then you should be prepared for others' view of those questions to come through such a lens. For an example of how to step away from that tone, see the question I linked to.
      $endgroup$
      – Emilio Pisanty
      Mar 5 at 13:42







    1




    1




    $begingroup$
    Thanks, I didn't think of that. Your absolutely right, but let me propose a solution to the problem: What if I replace the magnets with electromagnets which get powered by the dynamo that gets charged by the pendulum swinging. Now, what if the electromagnet gets powered when the pendulum is swinging towards it, but not powered once the pendulum swings away?
    $endgroup$
    – Florian Claaßen
    Mar 5 at 13:30





    $begingroup$
    Thanks, I didn't think of that. Your absolutely right, but let me propose a solution to the problem: What if I replace the magnets with electromagnets which get powered by the dynamo that gets charged by the pendulum swinging. Now, what if the electromagnet gets powered when the pendulum is swinging towards it, but not powered once the pendulum swings away?
    $endgroup$
    – Florian Claaßen
    Mar 5 at 13:30





    26




    26




    $begingroup$
    Then you will need to supply power to the electromagnet when you turn it on, and you will not be able to harvest equal amounts of power from the electromagnet when you turn it off. Let's get this straight: electromagnetism conserves energy. That's a theorem within the theory, and the only way you can get around it is by stepping away from electromagnetism. The fact that perpetual-motion machines don't work is not a "problem" in need of a "solution", and if that's what you're looking for, then this site is not the venue for it.
    $endgroup$
    – Emilio Pisanty
    Mar 5 at 13:37




    $begingroup$
    Then you will need to supply power to the electromagnet when you turn it on, and you will not be able to harvest equal amounts of power from the electromagnet when you turn it off. Let's get this straight: electromagnetism conserves energy. That's a theorem within the theory, and the only way you can get around it is by stepping away from electromagnetism. The fact that perpetual-motion machines don't work is not a "problem" in need of a "solution", and if that's what you're looking for, then this site is not the venue for it.
    $endgroup$
    – Emilio Pisanty
    Mar 5 at 13:37




    2




    2




    $begingroup$
    Right, right, thanks for the quick response. I was not looking for an actual perpetuum mobile but rather the mistake I made while thinking up the model. You have been of great help, thanks :)
    $endgroup$
    – Florian Claaßen
    Mar 5 at 13:39




    $begingroup$
    Right, right, thanks for the quick response. I was not looking for an actual perpetuum mobile but rather the mistake I made while thinking up the model. You have been of great help, thanks :)
    $endgroup$
    – Florian Claaßen
    Mar 5 at 13:39




    10




    10




    $begingroup$
    No worries. When asking about perpetual-motion machines, you should keep firmly in mind the type of population that asks the majority of those questions. If your text reads the same way as the comments by that population (which your first comment here definitely satisfies), then you should be prepared for others' view of those questions to come through such a lens. For an example of how to step away from that tone, see the question I linked to.
    $endgroup$
    – Emilio Pisanty
    Mar 5 at 13:42




    $begingroup$
    No worries. When asking about perpetual-motion machines, you should keep firmly in mind the type of population that asks the majority of those questions. If your text reads the same way as the comments by that population (which your first comment here definitely satisfies), then you should be prepared for others' view of those questions to come through such a lens. For an example of how to step away from that tone, see the question I linked to.
    $endgroup$
    – Emilio Pisanty
    Mar 5 at 13:42











    4












    $begingroup$

    Perpetual motion is impossible due to dissipation, or if you prefer second principle of thermodynamics and not to energy conservation.



    If your analysis of the suggested setup was correct, you could create mechanical energy for free !



    In first analysis, neglecting the (unavoidable) losses in the ferromagnetic medium, your system is conservative : what you have is a modified pendulum, where the confinement potential contains not only the gravitational part but also a magnetic component. Actually the magnetic force slightly decrease the recall torque that you would have with gravity alone, and the amplitude of motion will indeed be larger. But you nevertheless will have a turning point where the kinetic energy vanishes, and when going back, you will reach exactly the same angle for the turning point on the other side.
    This correspond to an oscillator with constant amplitude, because losses have been neglected.
    The sources of losses are at least : friction in air, friction on axe, ferromagnetic hysteresis, Foucault currents. So the amplitude will decrease and the perpetual motion be reduced to perpetual immobility...






    share|cite|improve this answer











    $endgroup$












    • $begingroup$
      The key thing is that the forces are conservative, as you say. If the forces are conservative there is a well-defined potential energy at any angle $theta$ and that's basically all you need.
      $endgroup$
      – tfb
      Mar 5 at 12:08










    • $begingroup$
      @TV I agree of course but it is worth to discuss in more detail the misconceptions involved in the OP. And magnets remains so mysterious, if not magical, for many people...
      $endgroup$
      – Jhor
      Mar 5 at 12:11










    • $begingroup$
      Oh yes, sorry, I only really added the comment as I was half-way through an answer which said that (now abandoned as yours is better).
      $endgroup$
      – tfb
      Mar 5 at 13:04















    4












    $begingroup$

    Perpetual motion is impossible due to dissipation, or if you prefer second principle of thermodynamics and not to energy conservation.



    If your analysis of the suggested setup was correct, you could create mechanical energy for free !



    In first analysis, neglecting the (unavoidable) losses in the ferromagnetic medium, your system is conservative : what you have is a modified pendulum, where the confinement potential contains not only the gravitational part but also a magnetic component. Actually the magnetic force slightly decrease the recall torque that you would have with gravity alone, and the amplitude of motion will indeed be larger. But you nevertheless will have a turning point where the kinetic energy vanishes, and when going back, you will reach exactly the same angle for the turning point on the other side.
    This correspond to an oscillator with constant amplitude, because losses have been neglected.
    The sources of losses are at least : friction in air, friction on axe, ferromagnetic hysteresis, Foucault currents. So the amplitude will decrease and the perpetual motion be reduced to perpetual immobility...






    share|cite|improve this answer











    $endgroup$












    • $begingroup$
      The key thing is that the forces are conservative, as you say. If the forces are conservative there is a well-defined potential energy at any angle $theta$ and that's basically all you need.
      $endgroup$
      – tfb
      Mar 5 at 12:08










    • $begingroup$
      @TV I agree of course but it is worth to discuss in more detail the misconceptions involved in the OP. And magnets remains so mysterious, if not magical, for many people...
      $endgroup$
      – Jhor
      Mar 5 at 12:11










    • $begingroup$
      Oh yes, sorry, I only really added the comment as I was half-way through an answer which said that (now abandoned as yours is better).
      $endgroup$
      – tfb
      Mar 5 at 13:04













    4












    4








    4





    $begingroup$

    Perpetual motion is impossible due to dissipation, or if you prefer second principle of thermodynamics and not to energy conservation.



    If your analysis of the suggested setup was correct, you could create mechanical energy for free !



    In first analysis, neglecting the (unavoidable) losses in the ferromagnetic medium, your system is conservative : what you have is a modified pendulum, where the confinement potential contains not only the gravitational part but also a magnetic component. Actually the magnetic force slightly decrease the recall torque that you would have with gravity alone, and the amplitude of motion will indeed be larger. But you nevertheless will have a turning point where the kinetic energy vanishes, and when going back, you will reach exactly the same angle for the turning point on the other side.
    This correspond to an oscillator with constant amplitude, because losses have been neglected.
    The sources of losses are at least : friction in air, friction on axe, ferromagnetic hysteresis, Foucault currents. So the amplitude will decrease and the perpetual motion be reduced to perpetual immobility...






    share|cite|improve this answer











    $endgroup$



    Perpetual motion is impossible due to dissipation, or if you prefer second principle of thermodynamics and not to energy conservation.



    If your analysis of the suggested setup was correct, you could create mechanical energy for free !



    In first analysis, neglecting the (unavoidable) losses in the ferromagnetic medium, your system is conservative : what you have is a modified pendulum, where the confinement potential contains not only the gravitational part but also a magnetic component. Actually the magnetic force slightly decrease the recall torque that you would have with gravity alone, and the amplitude of motion will indeed be larger. But you nevertheless will have a turning point where the kinetic energy vanishes, and when going back, you will reach exactly the same angle for the turning point on the other side.
    This correspond to an oscillator with constant amplitude, because losses have been neglected.
    The sources of losses are at least : friction in air, friction on axe, ferromagnetic hysteresis, Foucault currents. So the amplitude will decrease and the perpetual motion be reduced to perpetual immobility...







    share|cite|improve this answer














    share|cite|improve this answer



    share|cite|improve this answer








    edited Mar 5 at 12:13

























    answered Mar 5 at 12:02









    JhorJhor

    2446




    2446











    • $begingroup$
      The key thing is that the forces are conservative, as you say. If the forces are conservative there is a well-defined potential energy at any angle $theta$ and that's basically all you need.
      $endgroup$
      – tfb
      Mar 5 at 12:08










    • $begingroup$
      @TV I agree of course but it is worth to discuss in more detail the misconceptions involved in the OP. And magnets remains so mysterious, if not magical, for many people...
      $endgroup$
      – Jhor
      Mar 5 at 12:11










    • $begingroup$
      Oh yes, sorry, I only really added the comment as I was half-way through an answer which said that (now abandoned as yours is better).
      $endgroup$
      – tfb
      Mar 5 at 13:04
















    • $begingroup$
      The key thing is that the forces are conservative, as you say. If the forces are conservative there is a well-defined potential energy at any angle $theta$ and that's basically all you need.
      $endgroup$
      – tfb
      Mar 5 at 12:08










    • $begingroup$
      @TV I agree of course but it is worth to discuss in more detail the misconceptions involved in the OP. And magnets remains so mysterious, if not magical, for many people...
      $endgroup$
      – Jhor
      Mar 5 at 12:11










    • $begingroup$
      Oh yes, sorry, I only really added the comment as I was half-way through an answer which said that (now abandoned as yours is better).
      $endgroup$
      – tfb
      Mar 5 at 13:04















    $begingroup$
    The key thing is that the forces are conservative, as you say. If the forces are conservative there is a well-defined potential energy at any angle $theta$ and that's basically all you need.
    $endgroup$
    – tfb
    Mar 5 at 12:08




    $begingroup$
    The key thing is that the forces are conservative, as you say. If the forces are conservative there is a well-defined potential energy at any angle $theta$ and that's basically all you need.
    $endgroup$
    – tfb
    Mar 5 at 12:08












    $begingroup$
    @TV I agree of course but it is worth to discuss in more detail the misconceptions involved in the OP. And magnets remains so mysterious, if not magical, for many people...
    $endgroup$
    – Jhor
    Mar 5 at 12:11




    $begingroup$
    @TV I agree of course but it is worth to discuss in more detail the misconceptions involved in the OP. And magnets remains so mysterious, if not magical, for many people...
    $endgroup$
    – Jhor
    Mar 5 at 12:11












    $begingroup$
    Oh yes, sorry, I only really added the comment as I was half-way through an answer which said that (now abandoned as yours is better).
    $endgroup$
    – tfb
    Mar 5 at 13:04




    $begingroup$
    Oh yes, sorry, I only really added the comment as I was half-way through an answer which said that (now abandoned as yours is better).
    $endgroup$
    – tfb
    Mar 5 at 13:04











    0












    $begingroup$

    You are missing that as the metal passes through the changing magnetic field, Eddy currents will be produced.



    These currents will result in the metal heating up (with the amount depending on the speed of travel and strength of field).



    This heating essentially results in energy being removed from the system; and thus the bobbing can not be done forever; even if the rest of the system is perfect.






    share|cite|improve this answer









    $endgroup$

















      0












      $begingroup$

      You are missing that as the metal passes through the changing magnetic field, Eddy currents will be produced.



      These currents will result in the metal heating up (with the amount depending on the speed of travel and strength of field).



      This heating essentially results in energy being removed from the system; and thus the bobbing can not be done forever; even if the rest of the system is perfect.






      share|cite|improve this answer









      $endgroup$















        0












        0








        0





        $begingroup$

        You are missing that as the metal passes through the changing magnetic field, Eddy currents will be produced.



        These currents will result in the metal heating up (with the amount depending on the speed of travel and strength of field).



        This heating essentially results in energy being removed from the system; and thus the bobbing can not be done forever; even if the rest of the system is perfect.






        share|cite|improve this answer









        $endgroup$



        You are missing that as the metal passes through the changing magnetic field, Eddy currents will be produced.



        These currents will result in the metal heating up (with the amount depending on the speed of travel and strength of field).



        This heating essentially results in energy being removed from the system; and thus the bobbing can not be done forever; even if the rest of the system is perfect.







        share|cite|improve this answer












        share|cite|improve this answer



        share|cite|improve this answer










        answered Mar 6 at 13:32









        UKMonkeyUKMonkey

        1456




        1456












            Popular posts from this blog

            How to check contact read email or not when send email to Individual?

            Bahrain

            Postfix configuration issue with fips on centos 7; mailgun relay