What is this in my wall?
Clash Royale CLAN TAG#URR8PPP
up vote
12
down vote
favorite
I am removing wall paneling and this is in the corner of the room and wondering if it is safe to remove
phone-wiring
edited Dec 9 at 3:33
Machavity
6,45511634
asked Dec 8 at 22:56
dbollig
613
add a comment |
up vote
12
down vote
favorite
I am removing wall paneling and this is in the corner of the room and wondering if it is safe to remove
phone-wiring
edited Dec 9 at 3:33
Machavity
6,45511634
asked Dec 8 at 22:56
dbollig
613
11
Ahhh...the olden days before “wireless”.
– Lee Sam
Dec 8 at 23:05
1
Can you measure 48V DC across any pair of those wires?
– ThreePhaseEel
Dec 8 at 23:16
11
This question made me feel so old in such a short amount of time.
– Todd Wilcox
Dec 9 at 4:20
New contributor, I know. It just seems to smell of trolling. Like asking what a newspaper is. POTS. It's still out there.
– mckenzm
Dec 9 at 22:55
add a comment |
up vote
12
down vote
favorite
up vote
12
down vote
favorite
I am removing wall paneling and this is in the corner of the room and wondering if it is safe to remove
phone-wiring
edited Dec 9 at 3:33
Machavity
6,45511634
asked Dec 8 at 22:56
dbollig
613
I am removing wall paneling and this is in the corner of the room and wondering if it is safe to remove
phone-wiring
phone-wiring
edited Dec 9 at 3:33
Machavity
6,45511634
asked Dec 8 at 22:56
dbollig
613
edited Dec 9 at 3:33
Machavity
6,45511634
asked Dec 8 at 22:56
dbollig
613
edited Dec 9 at 3:33
Machavity
6,45511634
edited Dec 9 at 3:33
Machavity
6,45511634
edited Dec 9 at 3:33
Machavity
6,45511634
6,45511634
asked Dec 8 at 22:56
dbollig
613
asked Dec 8 at 22:56
dbollig
613
asked Dec 8 at 22:56
dbollig
613
613
11
Ahhh...the olden days before “wireless”.
– Lee Sam
Dec 8 at 23:05
1
Can you measure 48V DC across any pair of those wires?
– ThreePhaseEel
Dec 8 at 23:16
11
This question made me feel so old in such a short amount of time.
– Todd Wilcox
Dec 9 at 4:20
New contributor, I know. It just seems to smell of trolling. Like asking what a newspaper is. POTS. It's still out there.
– mckenzm
Dec 9 at 22:55
add a comment |
11
Ahhh...the olden days before “wireless”.
– Lee Sam
Dec 8 at 23:05
1
Can you measure 48V DC across any pair of those wires?
– ThreePhaseEel
Dec 8 at 23:16
11
This question made me feel so old in such a short amount of time.
– Todd Wilcox
Dec 9 at 4:20
New contributor, I know. It just seems to smell of trolling. Like asking what a newspaper is. POTS. It's still out there.
– mckenzm
Dec 9 at 22:55
11
11
Ahhh...the olden days before “wireless”.
– Lee Sam
Dec 8 at 23:05
Ahhh...the olden days before “wireless”.
– Lee Sam
Dec 8 at 23:05
1
1
Can you measure 48V DC across any pair of those wires?
– ThreePhaseEel
Dec 8 at 23:16
Can you measure 48V DC across any pair of those wires?
– ThreePhaseEel
Dec 8 at 23:16
11
11
This question made me feel so old in such a short amount of time.
– Todd Wilcox
Dec 9 at 4:20
This question made me feel so old in such a short amount of time.
– Todd Wilcox
Dec 9 at 4:20
New contributor, I know. It just seems to smell of trolling. Like asking what a newspaper is. POTS. It's still out there.
– mckenzm
Dec 9 at 22:55
New contributor, I know. It just seems to smell of trolling. Like asking what a newspaper is. POTS. It's still out there.
– mckenzm
Dec 9 at 22:55
add a comment |
1 Answer
1
active
oldest
votes
up vote
25
down vote
This is a telephone jack. If you measure 48v DC or so between wires then it is live, even if you don't currently have phone service. Ideally - live or not - you should try and find the other end of the wires and disconnect it if you aren't going to use it. That could be another jack elsewhere in the building or a patch panel or terminal block - typically on a wall in the basement or on an outside wall.
It is generally safe to remove this (i.e., cut off what you can see and cover it up) if it is not live, but that could confuse someone later on who finds the other end and is trying to install phones and can't figure out where a cable ends.
It is not safe to remove this if it is live (e.g., 48v DC) because (a) if the wires short it will affect any equipment that is connected to the same phone line and (b) even low voltage/low current could potentially be a fire hazard. That is extremely low risk if outside the wall, even if not quite connected correctly (as is the case currently) but hidden inside a wall that would not be a good thing. The risk is low - if you really want to disconnect it and you can't find the other end, taping (electrical tape) the end of the cable to protect it is advisable.
answered Dec 8 at 23:54
manassehkatz
6,2931029
It looks like a junction block as it is not obviously a socket and there are "posts".
– mckenzm
Dec 9 at 22:58
2
@mckenzm It is most definitely a jack. On the part that is NOT on the wall, to the left there are all 4 (red/green/yellow/black) wires going into the back of what is (except you can't see it from this angle) a standard phone jack. This was a very common configuration years ago. Most newer jacks (all the ones I could quickly find) have the 4 screw terminals and the actual jack as one piece with the cover (that in this one contains the actual jack) being just a piece of plastic.
– manassehkatz
Dec 9 at 23:09
2
I see it, RJ12-ish molding where the wires are going, apologies.
– mckenzm
Dec 9 at 23:10
No problem. I've been dealing with these jacks for a long time.
– manassehkatz
Dec 9 at 23:16
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "73"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f152275%2fwhat-is-this-in-my-wall%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
25
down vote
This is a telephone jack. If you measure 48v DC or so between wires then it is live, even if you don't currently have phone service. Ideally - live or not - you should try and find the other end of the wires and disconnect it if you aren't going to use it. That could be another jack elsewhere in the building or a patch panel or terminal block - typically on a wall in the basement or on an outside wall.
It is generally safe to remove this (i.e., cut off what you can see and cover it up) if it is not live, but that could confuse someone later on who finds the other end and is trying to install phones and can't figure out where a cable ends.
It is not safe to remove this if it is live (e.g., 48v DC) because (a) if the wires short it will affect any equipment that is connected to the same phone line and (b) even low voltage/low current could potentially be a fire hazard. That is extremely low risk if outside the wall, even if not quite connected correctly (as is the case currently) but hidden inside a wall that would not be a good thing. The risk is low - if you really want to disconnect it and you can't find the other end, taping (electrical tape) the end of the cable to protect it is advisable.
answered Dec 8 at 23:54
manassehkatz
6,2931029
It looks like a junction block as it is not obviously a socket and there are "posts".
– mckenzm
Dec 9 at 22:58
2
@mckenzm It is most definitely a jack. On the part that is NOT on the wall, to the left there are all 4 (red/green/yellow/black) wires going into the back of what is (except you can't see it from this angle) a standard phone jack. This was a very common configuration years ago. Most newer jacks (all the ones I could quickly find) have the 4 screw terminals and the actual jack as one piece with the cover (that in this one contains the actual jack) being just a piece of plastic.
– manassehkatz
Dec 9 at 23:09
2
I see it, RJ12-ish molding where the wires are going, apologies.
– mckenzm
Dec 9 at 23:10
No problem. I've been dealing with these jacks for a long time.
– manassehkatz
Dec 9 at 23:16
add a comment |
up vote
25
down vote
This is a telephone jack. If you measure 48v DC or so between wires then it is live, even if you don't currently have phone service. Ideally - live or not - you should try and find the other end of the wires and disconnect it if you aren't going to use it. That could be another jack elsewhere in the building or a patch panel or terminal block - typically on a wall in the basement or on an outside wall.
It is generally safe to remove this (i.e., cut off what you can see and cover it up) if it is not live, but that could confuse someone later on who finds the other end and is trying to install phones and can't figure out where a cable ends.
It is not safe to remove this if it is live (e.g., 48v DC) because (a) if the wires short it will affect any equipment that is connected to the same phone line and (b) even low voltage/low current could potentially be a fire hazard. That is extremely low risk if outside the wall, even if not quite connected correctly (as is the case currently) but hidden inside a wall that would not be a good thing. The risk is low - if you really want to disconnect it and you can't find the other end, taping (electrical tape) the end of the cable to protect it is advisable.
answered Dec 8 at 23:54
manassehkatz
6,2931029
It looks like a junction block as it is not obviously a socket and there are "posts".
– mckenzm
Dec 9 at 22:58
2
@mckenzm It is most definitely a jack. On the part that is NOT on the wall, to the left there are all 4 (red/green/yellow/black) wires going into the back of what is (except you can't see it from this angle) a standard phone jack. This was a very common configuration years ago. Most newer jacks (all the ones I could quickly find) have the 4 screw terminals and the actual jack as one piece with the cover (that in this one contains the actual jack) being just a piece of plastic.
– manassehkatz
Dec 9 at 23:09
2
I see it, RJ12-ish molding where the wires are going, apologies.
– mckenzm
Dec 9 at 23:10
No problem. I've been dealing with these jacks for a long time.
– manassehkatz
Dec 9 at 23:16
add a comment |
up vote
25
down vote
up vote
25
down vote
This is a telephone jack. If you measure 48v DC or so between wires then it is live, even if you don't currently have phone service. Ideally - live or not - you should try and find the other end of the wires and disconnect it if you aren't going to use it. That could be another jack elsewhere in the building or a patch panel or terminal block - typically on a wall in the basement or on an outside wall.
It is generally safe to remove this (i.e., cut off what you can see and cover it up) if it is not live, but that could confuse someone later on who finds the other end and is trying to install phones and can't figure out where a cable ends.
It is not safe to remove this if it is live (e.g., 48v DC) because (a) if the wires short it will affect any equipment that is connected to the same phone line and (b) even low voltage/low current could potentially be a fire hazard. That is extremely low risk if outside the wall, even if not quite connected correctly (as is the case currently) but hidden inside a wall that would not be a good thing. The risk is low - if you really want to disconnect it and you can't find the other end, taping (electrical tape) the end of the cable to protect it is advisable.
answered Dec 8 at 23:54
manassehkatz
6,2931029
This is a telephone jack. If you measure 48v DC or so between wires then it is live, even if you don't currently have phone service. Ideally - live or not - you should try and find the other end of the wires and disconnect it if you aren't going to use it. That could be another jack elsewhere in the building or a patch panel or terminal block - typically on a wall in the basement or on an outside wall.
It is generally safe to remove this (i.e., cut off what you can see and cover it up) if it is not live, but that could confuse someone later on who finds the other end and is trying to install phones and can't figure out where a cable ends.
It is not safe to remove this if it is live (e.g., 48v DC) because (a) if the wires short it will affect any equipment that is connected to the same phone line and (b) even low voltage/low current could potentially be a fire hazard. That is extremely low risk if outside the wall, even if not quite connected correctly (as is the case currently) but hidden inside a wall that would not be a good thing. The risk is low - if you really want to disconnect it and you can't find the other end, taping (electrical tape) the end of the cable to protect it is advisable.
answered Dec 8 at 23:54
manassehkatz
6,2931029
edited Dec 9 at 3:46
answered Dec 8 at 23:54
manassehkatz
6,2931029
answered Dec 8 at 23:54
manassehkatz
6,2931029
answered Dec 8 at 23:54
manassehkatz
6,2931029
6,2931029
It looks like a junction block as it is not obviously a socket and there are "posts".
– mckenzm
Dec 9 at 22:58
2
@mckenzm It is most definitely a jack. On the part that is NOT on the wall, to the left there are all 4 (red/green/yellow/black) wires going into the back of what is (except you can't see it from this angle) a standard phone jack. This was a very common configuration years ago. Most newer jacks (all the ones I could quickly find) have the 4 screw terminals and the actual jack as one piece with the cover (that in this one contains the actual jack) being just a piece of plastic.
– manassehkatz
Dec 9 at 23:09
2
I see it, RJ12-ish molding where the wires are going, apologies.
– mckenzm
Dec 9 at 23:10
No problem. I've been dealing with these jacks for a long time.
– manassehkatz
Dec 9 at 23:16
add a comment |
It looks like a junction block as it is not obviously a socket and there are "posts".
– mckenzm
Dec 9 at 22:58
2
@mckenzm It is most definitely a jack. On the part that is NOT on the wall, to the left there are all 4 (red/green/yellow/black) wires going into the back of what is (except you can't see it from this angle) a standard phone jack. This was a very common configuration years ago. Most newer jacks (all the ones I could quickly find) have the 4 screw terminals and the actual jack as one piece with the cover (that in this one contains the actual jack) being just a piece of plastic.
– manassehkatz
Dec 9 at 23:09
2
I see it, RJ12-ish molding where the wires are going, apologies.
– mckenzm
Dec 9 at 23:10
No problem. I've been dealing with these jacks for a long time.
– manassehkatz
Dec 9 at 23:16
It looks like a junction block as it is not obviously a socket and there are "posts".
– mckenzm
Dec 9 at 22:58
It looks like a junction block as it is not obviously a socket and there are "posts".
– mckenzm
Dec 9 at 22:58
2
2
@mckenzm It is most definitely a jack. On the part that is NOT on the wall, to the left there are all 4 (red/green/yellow/black) wires going into the back of what is (except you can't see it from this angle) a standard phone jack. This was a very common configuration years ago. Most newer jacks (all the ones I could quickly find) have the 4 screw terminals and the actual jack as one piece with the cover (that in this one contains the actual jack) being just a piece of plastic.
– manassehkatz
Dec 9 at 23:09
@mckenzm It is most definitely a jack. On the part that is NOT on the wall, to the left there are all 4 (red/green/yellow/black) wires going into the back of what is (except you can't see it from this angle) a standard phone jack. This was a very common configuration years ago. Most newer jacks (all the ones I could quickly find) have the 4 screw terminals and the actual jack as one piece with the cover (that in this one contains the actual jack) being just a piece of plastic.
– manassehkatz
Dec 9 at 23:09
2
2
I see it, RJ12-ish molding where the wires are going, apologies.
– mckenzm
Dec 9 at 23:10
I see it, RJ12-ish molding where the wires are going, apologies.
– mckenzm
Dec 9 at 23:10
No problem. I've been dealing with these jacks for a long time.
– manassehkatz
Dec 9 at 23:16
No problem. I've been dealing with these jacks for a long time.
– manassehkatz
Dec 9 at 23:16
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f152275%2fwhat-is-this-in-my-wall%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
11
Ahhh...the olden days before “wireless”.
– Lee Sam
Dec 8 at 23:05
1
Can you measure 48V DC across any pair of those wires?
– ThreePhaseEel
Dec 8 at 23:16
11
This question made me feel so old in such a short amount of time.
– Todd Wilcox
Dec 9 at 4:20
New contributor, I know. It just seems to smell of trolling. Like asking what a newspaper is. POTS. It's still out there.
– mckenzm
Dec 9 at 22:55