How do two castings of Mirror Image interact when one starts losing illusory duplicates?
Clash Royale CLAN TAG#URR8PPP
up vote
19
down vote
favorite
Inspired by this question: Can you cast Mirror Image twice on successive turns and have 6 duplicates of yourself instead of 3?
Mirror Image (PHB, pg. 260) says:
Three illusory duplicates of yourself appear in your space. [...]
Each time a creature targets you with an attack during the spell's duration, roll a d20 to determine whether the attack instead targets one of your duplicates. [...]
A duplicate's AC equals 10 + your Dexterity modifier. In an attack hits a duplicate, the duplicate is destroyed. [...]
The PHB says in Chapter 10 under "Combining Magical Effects" (PHB pg. 205):
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
If you have two castings of Mirror Image on you, then you will only be under the effect of one of them at any given moment. However, which is considered the most potent as the one that is currently "active" starts losing duplicates?
For example, is it the case that the active one must lose all duplicates, then when you have none left, that spell ends and the second one "kicks in" and you have 3 again; or is it the case that as soon the first casting loses a duplicate, the second casting is considered active, so they effectively swap back and forth, so you end up with 3 duplicates, then 3, then 2, then 2, then 1, then 1, before finally having none when both spells have ended?
And would the answer change depending on whether one of them was cast with a higher spell slot than the other, since that's the other way I'd think to determine potency?
dnd-5e spells stacking
add a comment |
up vote
19
down vote
favorite
Inspired by this question: Can you cast Mirror Image twice on successive turns and have 6 duplicates of yourself instead of 3?
Mirror Image (PHB, pg. 260) says:
Three illusory duplicates of yourself appear in your space. [...]
Each time a creature targets you with an attack during the spell's duration, roll a d20 to determine whether the attack instead targets one of your duplicates. [...]
A duplicate's AC equals 10 + your Dexterity modifier. In an attack hits a duplicate, the duplicate is destroyed. [...]
The PHB says in Chapter 10 under "Combining Magical Effects" (PHB pg. 205):
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
If you have two castings of Mirror Image on you, then you will only be under the effect of one of them at any given moment. However, which is considered the most potent as the one that is currently "active" starts losing duplicates?
For example, is it the case that the active one must lose all duplicates, then when you have none left, that spell ends and the second one "kicks in" and you have 3 again; or is it the case that as soon the first casting loses a duplicate, the second casting is considered active, so they effectively swap back and forth, so you end up with 3 duplicates, then 3, then 2, then 2, then 1, then 1, before finally having none when both spells have ended?
And would the answer change depending on whether one of them was cast with a higher spell slot than the other, since that's the other way I'd think to determine potency?
dnd-5e spells stacking
add a comment |
up vote
19
down vote
favorite
up vote
19
down vote
favorite
Inspired by this question: Can you cast Mirror Image twice on successive turns and have 6 duplicates of yourself instead of 3?
Mirror Image (PHB, pg. 260) says:
Three illusory duplicates of yourself appear in your space. [...]
Each time a creature targets you with an attack during the spell's duration, roll a d20 to determine whether the attack instead targets one of your duplicates. [...]
A duplicate's AC equals 10 + your Dexterity modifier. In an attack hits a duplicate, the duplicate is destroyed. [...]
The PHB says in Chapter 10 under "Combining Magical Effects" (PHB pg. 205):
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
If you have two castings of Mirror Image on you, then you will only be under the effect of one of them at any given moment. However, which is considered the most potent as the one that is currently "active" starts losing duplicates?
For example, is it the case that the active one must lose all duplicates, then when you have none left, that spell ends and the second one "kicks in" and you have 3 again; or is it the case that as soon the first casting loses a duplicate, the second casting is considered active, so they effectively swap back and forth, so you end up with 3 duplicates, then 3, then 2, then 2, then 1, then 1, before finally having none when both spells have ended?
And would the answer change depending on whether one of them was cast with a higher spell slot than the other, since that's the other way I'd think to determine potency?
dnd-5e spells stacking
Inspired by this question: Can you cast Mirror Image twice on successive turns and have 6 duplicates of yourself instead of 3?
Mirror Image (PHB, pg. 260) says:
Three illusory duplicates of yourself appear in your space. [...]
Each time a creature targets you with an attack during the spell's duration, roll a d20 to determine whether the attack instead targets one of your duplicates. [...]
A duplicate's AC equals 10 + your Dexterity modifier. In an attack hits a duplicate, the duplicate is destroyed. [...]
The PHB says in Chapter 10 under "Combining Magical Effects" (PHB pg. 205):
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
If you have two castings of Mirror Image on you, then you will only be under the effect of one of them at any given moment. However, which is considered the most potent as the one that is currently "active" starts losing duplicates?
For example, is it the case that the active one must lose all duplicates, then when you have none left, that spell ends and the second one "kicks in" and you have 3 again; or is it the case that as soon the first casting loses a duplicate, the second casting is considered active, so they effectively swap back and forth, so you end up with 3 duplicates, then 3, then 2, then 2, then 1, then 1, before finally having none when both spells have ended?
And would the answer change depending on whether one of them was cast with a higher spell slot than the other, since that's the other way I'd think to determine potency?
dnd-5e spells stacking
dnd-5e spells stacking
edited 2 days ago
Rubiksmoose
43.5k6217332
43.5k6217332
asked 2 days ago
NathanS
19.3k685207
19.3k685207
add a comment |
add a comment |
3 Answers
3
active
oldest
votes
up vote
10
down vote
The spell with the most images would become active (all else being equal)
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
This is going to come down to how the DM rules how to measure potency as the game doesn't tell us a definitive answer for what should count. It seems reasonable to say that, all other things being equal, that the spell with the most images would be considered the most potent effect at the time.
How this would play out in practice would be that whenever a spell's number of images is reduced below that of the other spell, the other spell would become active. When both spells have equal images (and everything else) it really doesn't matter which spell is active done they are identical. The alternating behavior would continue until one spell loses all of its images.
What if all else is not equal?
The above assumes that the spells are identical in every respect (duration, AC, etc.) if there is any other discrepancies the DM will have to choose how they define potency in more detail. For example, if one mirror image was cast a round later than the other one it would be completely reasonable to rule that the one with the longer duration remaining would be the more potent spell and that it would override the spell for the entire duration. This would also be the case if one of the spells was cast at a higher level than the other (and everything else was the same).
1
So in practice, it works the same way as a single casting except that each image will require two hits before it disappears?
– Ryan Thompson
2 days ago
1
@RyanThompson technically, each image will disappear just like normal, but the second spell would switch in with a new one a t some point. Effectively it would act somewhat like what you say, but it is a subtle difference.
– Rubiksmoose
2 days ago
add a comment |
up vote
2
down vote
The most potent casting or most recent would be in effect until it ends. Then the previous casting is in effect.
When the most recently cast mirror image runs out of images, it stops affecting the target. The previously cast instance of the spell is then in effect assuming it still has time on it's duration.
Casting the same spell multiple times
Relevant Sage Advice interview with Jeremy Crawford (~25:30) regarding person under the effect of a spell (true polymorph) and that spell being superseded by a subsequent casting of the same spell.
"The next one on the stack replaces the previous one on the stack unless the previous one ... is more powerful."
As pointed out by Rubiksmoose, the most recent errata for the Player's Handbook clarifies:
Combining Magical Effects (p. 205). In the first paragraph, the following sentence has been added to the first paragraph: “Or the most recent effect applies if the castings are equally potent and their durations overlap.”
add a comment |
up vote
0
down vote
They would switch out
The rule for combining Magical Effects simply says:
the most potent effect - such as the highest bonus - from those castings applies
It leaves determination of what for a particular spell counts as the Most potent effect to the DM & player.
For the Mirror Image spell that would in my opinion mean that the spell that gives you the highest chance of not being hit is used at any given time.
Equal potentcy
In this case when the bonuses are equal you have to determine which to apply. This is probably a call by the DM. Two options that I would call reasonable are:
When equal use the one that will end first.
For case 1 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 1 with an 8+ roll until it looses another image then you use spell 2's 8+ etc.
Switch spell only if it's better
For case 2 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 2 with an 8+ roll until it looses another image then you use spell 2's 1+ etc.
How it looks
In game I would explain the visual as you having 6 copies running about but that they keep moving through each other providing limited effect.
4
Not getting hit is not the effect of the spell — rather, creating false images is. There are many uses of Mirror Image that do not rely on combat, so I don’t consider the most potent effect of multiple castings of Mirror Image to be that which decreases hit chance the most.
– Santana Afton
2 days ago
add a comment |
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
10
down vote
The spell with the most images would become active (all else being equal)
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
This is going to come down to how the DM rules how to measure potency as the game doesn't tell us a definitive answer for what should count. It seems reasonable to say that, all other things being equal, that the spell with the most images would be considered the most potent effect at the time.
How this would play out in practice would be that whenever a spell's number of images is reduced below that of the other spell, the other spell would become active. When both spells have equal images (and everything else) it really doesn't matter which spell is active done they are identical. The alternating behavior would continue until one spell loses all of its images.
What if all else is not equal?
The above assumes that the spells are identical in every respect (duration, AC, etc.) if there is any other discrepancies the DM will have to choose how they define potency in more detail. For example, if one mirror image was cast a round later than the other one it would be completely reasonable to rule that the one with the longer duration remaining would be the more potent spell and that it would override the spell for the entire duration. This would also be the case if one of the spells was cast at a higher level than the other (and everything else was the same).
1
So in practice, it works the same way as a single casting except that each image will require two hits before it disappears?
– Ryan Thompson
2 days ago
1
@RyanThompson technically, each image will disappear just like normal, but the second spell would switch in with a new one a t some point. Effectively it would act somewhat like what you say, but it is a subtle difference.
– Rubiksmoose
2 days ago
add a comment |
up vote
10
down vote
The spell with the most images would become active (all else being equal)
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
This is going to come down to how the DM rules how to measure potency as the game doesn't tell us a definitive answer for what should count. It seems reasonable to say that, all other things being equal, that the spell with the most images would be considered the most potent effect at the time.
How this would play out in practice would be that whenever a spell's number of images is reduced below that of the other spell, the other spell would become active. When both spells have equal images (and everything else) it really doesn't matter which spell is active done they are identical. The alternating behavior would continue until one spell loses all of its images.
What if all else is not equal?
The above assumes that the spells are identical in every respect (duration, AC, etc.) if there is any other discrepancies the DM will have to choose how they define potency in more detail. For example, if one mirror image was cast a round later than the other one it would be completely reasonable to rule that the one with the longer duration remaining would be the more potent spell and that it would override the spell for the entire duration. This would also be the case if one of the spells was cast at a higher level than the other (and everything else was the same).
1
So in practice, it works the same way as a single casting except that each image will require two hits before it disappears?
– Ryan Thompson
2 days ago
1
@RyanThompson technically, each image will disappear just like normal, but the second spell would switch in with a new one a t some point. Effectively it would act somewhat like what you say, but it is a subtle difference.
– Rubiksmoose
2 days ago
add a comment |
up vote
10
down vote
up vote
10
down vote
The spell with the most images would become active (all else being equal)
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
This is going to come down to how the DM rules how to measure potency as the game doesn't tell us a definitive answer for what should count. It seems reasonable to say that, all other things being equal, that the spell with the most images would be considered the most potent effect at the time.
How this would play out in practice would be that whenever a spell's number of images is reduced below that of the other spell, the other spell would become active. When both spells have equal images (and everything else) it really doesn't matter which spell is active done they are identical. The alternating behavior would continue until one spell loses all of its images.
What if all else is not equal?
The above assumes that the spells are identical in every respect (duration, AC, etc.) if there is any other discrepancies the DM will have to choose how they define potency in more detail. For example, if one mirror image was cast a round later than the other one it would be completely reasonable to rule that the one with the longer duration remaining would be the more potent spell and that it would override the spell for the entire duration. This would also be the case if one of the spells was cast at a higher level than the other (and everything else was the same).
The spell with the most images would become active (all else being equal)
The effects of the same spell cast multiple times don't combine, however. Instead, the most potent effect - such as the highest bonus - from those castings applies while their durations overlap.
This is going to come down to how the DM rules how to measure potency as the game doesn't tell us a definitive answer for what should count. It seems reasonable to say that, all other things being equal, that the spell with the most images would be considered the most potent effect at the time.
How this would play out in practice would be that whenever a spell's number of images is reduced below that of the other spell, the other spell would become active. When both spells have equal images (and everything else) it really doesn't matter which spell is active done they are identical. The alternating behavior would continue until one spell loses all of its images.
What if all else is not equal?
The above assumes that the spells are identical in every respect (duration, AC, etc.) if there is any other discrepancies the DM will have to choose how they define potency in more detail. For example, if one mirror image was cast a round later than the other one it would be completely reasonable to rule that the one with the longer duration remaining would be the more potent spell and that it would override the spell for the entire duration. This would also be the case if one of the spells was cast at a higher level than the other (and everything else was the same).
edited yesterday
answered 2 days ago
Rubiksmoose
43.5k6217332
43.5k6217332
1
So in practice, it works the same way as a single casting except that each image will require two hits before it disappears?
– Ryan Thompson
2 days ago
1
@RyanThompson technically, each image will disappear just like normal, but the second spell would switch in with a new one a t some point. Effectively it would act somewhat like what you say, but it is a subtle difference.
– Rubiksmoose
2 days ago
add a comment |
1
So in practice, it works the same way as a single casting except that each image will require two hits before it disappears?
– Ryan Thompson
2 days ago
1
@RyanThompson technically, each image will disappear just like normal, but the second spell would switch in with a new one a t some point. Effectively it would act somewhat like what you say, but it is a subtle difference.
– Rubiksmoose
2 days ago
1
1
So in practice, it works the same way as a single casting except that each image will require two hits before it disappears?
– Ryan Thompson
2 days ago
So in practice, it works the same way as a single casting except that each image will require two hits before it disappears?
– Ryan Thompson
2 days ago
1
1
@RyanThompson technically, each image will disappear just like normal, but the second spell would switch in with a new one a t some point. Effectively it would act somewhat like what you say, but it is a subtle difference.
– Rubiksmoose
2 days ago
@RyanThompson technically, each image will disappear just like normal, but the second spell would switch in with a new one a t some point. Effectively it would act somewhat like what you say, but it is a subtle difference.
– Rubiksmoose
2 days ago
add a comment |
up vote
2
down vote
The most potent casting or most recent would be in effect until it ends. Then the previous casting is in effect.
When the most recently cast mirror image runs out of images, it stops affecting the target. The previously cast instance of the spell is then in effect assuming it still has time on it's duration.
Casting the same spell multiple times
Relevant Sage Advice interview with Jeremy Crawford (~25:30) regarding person under the effect of a spell (true polymorph) and that spell being superseded by a subsequent casting of the same spell.
"The next one on the stack replaces the previous one on the stack unless the previous one ... is more powerful."
As pointed out by Rubiksmoose, the most recent errata for the Player's Handbook clarifies:
Combining Magical Effects (p. 205). In the first paragraph, the following sentence has been added to the first paragraph: “Or the most recent effect applies if the castings are equally potent and their durations overlap.”
add a comment |
up vote
2
down vote
The most potent casting or most recent would be in effect until it ends. Then the previous casting is in effect.
When the most recently cast mirror image runs out of images, it stops affecting the target. The previously cast instance of the spell is then in effect assuming it still has time on it's duration.
Casting the same spell multiple times
Relevant Sage Advice interview with Jeremy Crawford (~25:30) regarding person under the effect of a spell (true polymorph) and that spell being superseded by a subsequent casting of the same spell.
"The next one on the stack replaces the previous one on the stack unless the previous one ... is more powerful."
As pointed out by Rubiksmoose, the most recent errata for the Player's Handbook clarifies:
Combining Magical Effects (p. 205). In the first paragraph, the following sentence has been added to the first paragraph: “Or the most recent effect applies if the castings are equally potent and their durations overlap.”
add a comment |
up vote
2
down vote
up vote
2
down vote
The most potent casting or most recent would be in effect until it ends. Then the previous casting is in effect.
When the most recently cast mirror image runs out of images, it stops affecting the target. The previously cast instance of the spell is then in effect assuming it still has time on it's duration.
Casting the same spell multiple times
Relevant Sage Advice interview with Jeremy Crawford (~25:30) regarding person under the effect of a spell (true polymorph) and that spell being superseded by a subsequent casting of the same spell.
"The next one on the stack replaces the previous one on the stack unless the previous one ... is more powerful."
As pointed out by Rubiksmoose, the most recent errata for the Player's Handbook clarifies:
Combining Magical Effects (p. 205). In the first paragraph, the following sentence has been added to the first paragraph: “Or the most recent effect applies if the castings are equally potent and their durations overlap.”
The most potent casting or most recent would be in effect until it ends. Then the previous casting is in effect.
When the most recently cast mirror image runs out of images, it stops affecting the target. The previously cast instance of the spell is then in effect assuming it still has time on it's duration.
Casting the same spell multiple times
Relevant Sage Advice interview with Jeremy Crawford (~25:30) regarding person under the effect of a spell (true polymorph) and that spell being superseded by a subsequent casting of the same spell.
"The next one on the stack replaces the previous one on the stack unless the previous one ... is more powerful."
As pointed out by Rubiksmoose, the most recent errata for the Player's Handbook clarifies:
Combining Magical Effects (p. 205). In the first paragraph, the following sentence has been added to the first paragraph: “Or the most recent effect applies if the castings are equally potent and their durations overlap.”
edited yesterday
V2Blast
17.9k248113
17.9k248113
answered 2 days ago
Grosscol
6,5381454
6,5381454
add a comment |
add a comment |
up vote
0
down vote
They would switch out
The rule for combining Magical Effects simply says:
the most potent effect - such as the highest bonus - from those castings applies
It leaves determination of what for a particular spell counts as the Most potent effect to the DM & player.
For the Mirror Image spell that would in my opinion mean that the spell that gives you the highest chance of not being hit is used at any given time.
Equal potentcy
In this case when the bonuses are equal you have to determine which to apply. This is probably a call by the DM. Two options that I would call reasonable are:
When equal use the one that will end first.
For case 1 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 1 with an 8+ roll until it looses another image then you use spell 2's 8+ etc.
Switch spell only if it's better
For case 2 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 2 with an 8+ roll until it looses another image then you use spell 2's 1+ etc.
How it looks
In game I would explain the visual as you having 6 copies running about but that they keep moving through each other providing limited effect.
4
Not getting hit is not the effect of the spell — rather, creating false images is. There are many uses of Mirror Image that do not rely on combat, so I don’t consider the most potent effect of multiple castings of Mirror Image to be that which decreases hit chance the most.
– Santana Afton
2 days ago
add a comment |
up vote
0
down vote
They would switch out
The rule for combining Magical Effects simply says:
the most potent effect - such as the highest bonus - from those castings applies
It leaves determination of what for a particular spell counts as the Most potent effect to the DM & player.
For the Mirror Image spell that would in my opinion mean that the spell that gives you the highest chance of not being hit is used at any given time.
Equal potentcy
In this case when the bonuses are equal you have to determine which to apply. This is probably a call by the DM. Two options that I would call reasonable are:
When equal use the one that will end first.
For case 1 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 1 with an 8+ roll until it looses another image then you use spell 2's 8+ etc.
Switch spell only if it's better
For case 2 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 2 with an 8+ roll until it looses another image then you use spell 2's 1+ etc.
How it looks
In game I would explain the visual as you having 6 copies running about but that they keep moving through each other providing limited effect.
4
Not getting hit is not the effect of the spell — rather, creating false images is. There are many uses of Mirror Image that do not rely on combat, so I don’t consider the most potent effect of multiple castings of Mirror Image to be that which decreases hit chance the most.
– Santana Afton
2 days ago
add a comment |
up vote
0
down vote
up vote
0
down vote
They would switch out
The rule for combining Magical Effects simply says:
the most potent effect - such as the highest bonus - from those castings applies
It leaves determination of what for a particular spell counts as the Most potent effect to the DM & player.
For the Mirror Image spell that would in my opinion mean that the spell that gives you the highest chance of not being hit is used at any given time.
Equal potentcy
In this case when the bonuses are equal you have to determine which to apply. This is probably a call by the DM. Two options that I would call reasonable are:
When equal use the one that will end first.
For case 1 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 1 with an 8+ roll until it looses another image then you use spell 2's 8+ etc.
Switch spell only if it's better
For case 2 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 2 with an 8+ roll until it looses another image then you use spell 2's 1+ etc.
How it looks
In game I would explain the visual as you having 6 copies running about but that they keep moving through each other providing limited effect.
They would switch out
The rule for combining Magical Effects simply says:
the most potent effect - such as the highest bonus - from those castings applies
It leaves determination of what for a particular spell counts as the Most potent effect to the DM & player.
For the Mirror Image spell that would in my opinion mean that the spell that gives you the highest chance of not being hit is used at any given time.
Equal potentcy
In this case when the bonuses are equal you have to determine which to apply. This is probably a call by the DM. Two options that I would call reasonable are:
When equal use the one that will end first.
For case 1 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 1 with an 8+ roll until it looses another image then you use spell 2's 8+ etc.
Switch spell only if it's better
For case 2 this would mean that after first casting spell 1 and then spell 2 then first spell 1 will be used. If spell 1 looses an image you use the 6+ roll of spell 2 then if that looses a image you would use spell 2 with an 8+ roll until it looses another image then you use spell 2's 1+ etc.
How it looks
In game I would explain the visual as you having 6 copies running about but that they keep moving through each other providing limited effect.
edited yesterday
V2Blast
17.9k248113
17.9k248113
answered 2 days ago
Dinomaster
1,505415
1,505415
4
Not getting hit is not the effect of the spell — rather, creating false images is. There are many uses of Mirror Image that do not rely on combat, so I don’t consider the most potent effect of multiple castings of Mirror Image to be that which decreases hit chance the most.
– Santana Afton
2 days ago
add a comment |
4
Not getting hit is not the effect of the spell — rather, creating false images is. There are many uses of Mirror Image that do not rely on combat, so I don’t consider the most potent effect of multiple castings of Mirror Image to be that which decreases hit chance the most.
– Santana Afton
2 days ago
4
4
Not getting hit is not the effect of the spell — rather, creating false images is. There are many uses of Mirror Image that do not rely on combat, so I don’t consider the most potent effect of multiple castings of Mirror Image to be that which decreases hit chance the most.
– Santana Afton
2 days ago
Not getting hit is not the effect of the spell — rather, creating false images is. There are many uses of Mirror Image that do not rely on combat, so I don’t consider the most potent effect of multiple castings of Mirror Image to be that which decreases hit chance the most.
– Santana Afton
2 days ago
add a comment |
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2frpg.stackexchange.com%2fquestions%2f135598%2fhow-do-two-castings-of-mirror-image-interact-when-one-starts-losing-illusory-dup%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown