Basionym


In the scientific name of organisms, basionym or basyonym[1][2] means the original name on which a new name is based. The term original combination or protonym is used in the same way in zoology.[citation needed]Bacteriology uses a similar term, basonym, spelled without an i.[3]




Contents





  • 1 Use in botany

    • 1.1 Combinatio nova


    • 1.2 Status novus



  • 2 See also


  • 3 References




Use in botany


The term "basionym" is used in botany only for the circumstances where a previous name exists with a useful description, and the International Code of Nomenclature for algae, fungi, and plants does not require a full description with the new name.[4] A basionym must therefore be legitimate. Basionyms are regulated by the code's articles 6.10, 7.3, 41, and others.[5]



Combinatio nova


The basionym of the name Picea abies (the Norway spruce) is Pinus abies. The species was originally named Pinus abies by Carl Linnaeus. Later on, botanist Gustav Karl Wilhelm Hermann Karsten decided this species should not be grouped in the same genus (Pinus) as the pines, so he transferred it to the genus Picea (the spruces). The new name Picea abies is combinatio nova, a new combination (abbreviated comb. nov.).



Status novus


In 1964, the subfamily name Pomoideae, which had been in use for the group within family Rosaceae that have pome fruit like apples, was no longer acceptable under the code of nomenclature because it is not based on a genus name. Claude Weber did not consider the family name Malaceae Small to be taxonomically appropriate, so he created the name Maloideae at the rank of subfamily, referring to the original description of the family, and using the same type.[6] This change of rank from family to subfamily is an example of status novus (abbreviated stat. nov.), also called a "name at new rank".



See also


  • Glossary of scientific naming


References




  1. ^ WoRMS Notadusta punctata (Linnaeus, 1771)


  2. ^ Heiden, G. (2013), "Two new combinations in Baccharis (Asteraceae: Astereae)" (PDF), Phytoneuron, 2013-78: 1–2.mw-parser-output cite.citationfont-style:inherit.mw-parser-output qquotes:"""""""'""'".mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-limited a,.mw-parser-output .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em


  3. ^ Tindall, B. J. (1999), "Misunderstanding the Bacteriological Code", International Journal of Systematic Bacteriology, 49 (3): 1313–1316, doi:10.1099/00207713-49-3-1313, PMID 10425796, archived from the original on 2008-08-03, retrieved 2008-07-28


  4. ^ Turland, N. (2013), The Code Decoded: A user's guide to the International Code of Nomenclature for algae, fungi, and plants, Regnum Vegetabile Volume 155, Koeltz Scientific Books, ISBN 978-3-87429-433-1


  5. ^ McNeill, J.; Barrie, F.R.; Buck, W.R.; Demoulin, V.; Greuter, W.; Hawksworth, D.L.; Herendeen, P.S.; Knapp, S.; Marhold, K.; Prado, J.; Prud'homme Van Reine, W.F.; Smith, G.F.; Wiersema, J.H.; Turland, N.J. (2012). "Glossary". International Code of Nomenclature for algae, fungi, and plants (Melbourne Code) adopted by the Eighteenth International Botanical Congress Melbourne, Australia, July 2011. Regnum Vegetabile 154. A.R.G. Gantner Verlag KG. ISBN 978-3-87429-425-6.


  6. ^ Weber, C. (1964), "The genus Chaenomeles (Rosaceae)", Journal of the Arnold Arboretum, 45: 161–205, 302–345 Page 164, footnote 1









-

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Se
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fix it? –
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this
Read more