Is my plan for an air admittance valve ok?

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP












6















I am in the middle of finishing my basement and want to add a sink that will attach to an existing kitchen drain from above. I don't have a way to vent the sink easily unless I use a Air Admittance Valve. The drain will run about 5 feet, make a 90 degree and run another 4 feet. Would the attached diagram work correctly? Anything in blue is the new plumbing.



enter image description here










share|improve this question



















  • 3





    question: isn't the "existing drain from kitchen" already a vented line?

    – Leo Lansford
    Feb 20 at 19:36






  • 1





    In the setup you've drawn, the air admittance valve wouldn't be doing anything that the sink hole itself isn't already doing. The point of vents is to stop moving bodies of water on the sewer side of the trap from sucking the pipe (and trap) dry. Your existing kitchen DWV might already provide enough air as Leo queried above, but if not, put the AAV in the position Isherwood shows in his answer (as long as it's permitted by local code).

    – CactusCake
    Feb 20 at 20:19
















6















I am in the middle of finishing my basement and want to add a sink that will attach to an existing kitchen drain from above. I don't have a way to vent the sink easily unless I use a Air Admittance Valve. The drain will run about 5 feet, make a 90 degree and run another 4 feet. Would the attached diagram work correctly? Anything in blue is the new plumbing.



enter image description here










share|improve this question



















  • 3





    question: isn't the "existing drain from kitchen" already a vented line?

    – Leo Lansford
    Feb 20 at 19:36






  • 1





    In the setup you've drawn, the air admittance valve wouldn't be doing anything that the sink hole itself isn't already doing. The point of vents is to stop moving bodies of water on the sewer side of the trap from sucking the pipe (and trap) dry. Your existing kitchen DWV might already provide enough air as Leo queried above, but if not, put the AAV in the position Isherwood shows in his answer (as long as it's permitted by local code).

    – CactusCake
    Feb 20 at 20:19














6












6








6


2






I am in the middle of finishing my basement and want to add a sink that will attach to an existing kitchen drain from above. I don't have a way to vent the sink easily unless I use a Air Admittance Valve. The drain will run about 5 feet, make a 90 degree and run another 4 feet. Would the attached diagram work correctly? Anything in blue is the new plumbing.



enter image description here










share|improve this question
















I am in the middle of finishing my basement and want to add a sink that will attach to an existing kitchen drain from above. I don't have a way to vent the sink easily unless I use a Air Admittance Valve. The drain will run about 5 feet, make a 90 degree and run another 4 feet. Would the attached diagram work correctly? Anything in blue is the new plumbing.



enter image description here







plumbing sink drain-waste-vent






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Feb 20 at 21:20









Machavity

7,79511839




7,79511839










asked Feb 20 at 18:30









Shawn StephensShawn Stephens

311




311







  • 3





    question: isn't the "existing drain from kitchen" already a vented line?

    – Leo Lansford
    Feb 20 at 19:36






  • 1





    In the setup you've drawn, the air admittance valve wouldn't be doing anything that the sink hole itself isn't already doing. The point of vents is to stop moving bodies of water on the sewer side of the trap from sucking the pipe (and trap) dry. Your existing kitchen DWV might already provide enough air as Leo queried above, but if not, put the AAV in the position Isherwood shows in his answer (as long as it's permitted by local code).

    – CactusCake
    Feb 20 at 20:19













  • 3





    question: isn't the "existing drain from kitchen" already a vented line?

    – Leo Lansford
    Feb 20 at 19:36






  • 1





    In the setup you've drawn, the air admittance valve wouldn't be doing anything that the sink hole itself isn't already doing. The point of vents is to stop moving bodies of water on the sewer side of the trap from sucking the pipe (and trap) dry. Your existing kitchen DWV might already provide enough air as Leo queried above, but if not, put the AAV in the position Isherwood shows in his answer (as long as it's permitted by local code).

    – CactusCake
    Feb 20 at 20:19








3




3





question: isn't the "existing drain from kitchen" already a vented line?

– Leo Lansford
Feb 20 at 19:36





question: isn't the "existing drain from kitchen" already a vented line?

– Leo Lansford
Feb 20 at 19:36




1




1





In the setup you've drawn, the air admittance valve wouldn't be doing anything that the sink hole itself isn't already doing. The point of vents is to stop moving bodies of water on the sewer side of the trap from sucking the pipe (and trap) dry. Your existing kitchen DWV might already provide enough air as Leo queried above, but if not, put the AAV in the position Isherwood shows in his answer (as long as it's permitted by local code).

– CactusCake
Feb 20 at 20:19






In the setup you've drawn, the air admittance valve wouldn't be doing anything that the sink hole itself isn't already doing. The point of vents is to stop moving bodies of water on the sewer side of the trap from sucking the pipe (and trap) dry. Your existing kitchen DWV might already provide enough air as Leo queried above, but if not, put the AAV in the position Isherwood shows in his answer (as long as it's permitted by local code).

– CactusCake
Feb 20 at 20:19











1 Answer
1






active

oldest

votes


















10














The valve needs to be downstream of the trap, basically in the position an actual vent would be.



enter image description here



source



Also, be sure they're legal where you are. My local inspector forced me to run a new vent line and tie into the existing stack above the upstairs sink drain when I wanted to add a laundry drain.






share|improve this answer






















    Your Answer








    StackExchange.ready(function()
    var channelOptions =
    tags: "".split(" "),
    id: "73"
    ;
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function()
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled)
    StackExchange.using("snippets", function()
    createEditor();
    );

    else
    createEditor();

    );

    function createEditor()
    StackExchange.prepareEditor(
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader:
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    ,
    noCode: true, onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    );



    );













    draft saved

    draft discarded


















    StackExchange.ready(
    function ()
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f158120%2fis-my-plan-for-an-air-admittance-valve-ok%23new-answer', 'question_page');

    );

    Post as a guest















    Required, but never shown

























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    10














    The valve needs to be downstream of the trap, basically in the position an actual vent would be.



    enter image description here



    source



    Also, be sure they're legal where you are. My local inspector forced me to run a new vent line and tie into the existing stack above the upstairs sink drain when I wanted to add a laundry drain.






    share|improve this answer



























      10














      The valve needs to be downstream of the trap, basically in the position an actual vent would be.



      enter image description here



      source



      Also, be sure they're legal where you are. My local inspector forced me to run a new vent line and tie into the existing stack above the upstairs sink drain when I wanted to add a laundry drain.






      share|improve this answer

























        10












        10








        10







        The valve needs to be downstream of the trap, basically in the position an actual vent would be.



        enter image description here



        source



        Also, be sure they're legal where you are. My local inspector forced me to run a new vent line and tie into the existing stack above the upstairs sink drain when I wanted to add a laundry drain.






        share|improve this answer













        The valve needs to be downstream of the trap, basically in the position an actual vent would be.



        enter image description here



        source



        Also, be sure they're legal where you are. My local inspector forced me to run a new vent line and tie into the existing stack above the upstairs sink drain when I wanted to add a laundry drain.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Feb 20 at 18:34









        isherwoodisherwood

        49.6k456126




        49.6k456126



























            draft saved

            draft discarded
















































            Thanks for contributing an answer to Home Improvement Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid


            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.

            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function ()
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f158120%2fis-my-plan-for-an-air-admittance-valve-ok%23new-answer', 'question_page');

            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown






            Popular posts from this blog

            How to check contact read email or not when send email to Individual?

            Displaying single band from multi-band raster using QGIS

            How many registers does an x86_64 CPU actually have?