xbacklight not working

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP












3














I have my ASUS X556U with DualBoot between W10 and Debian Jessie, but I need to regulate the brightness.



I've been serching in Google and I found xbacklight, but I have a problem while executing it:



barreeeiroo@Debian-Diego ~> xbacklight -dec 10
No outputs have backlight property
barreeeiroo@Debian-Diego ~>



Then I search in Google more info about the problem, and I found this post, but it causes another problem:



barreeeiroo@Debian-Diego ~> 
sudo ln -s /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/rtsx_usb_sdmmc.4/leds/mmc0::/brightness /sys/class/backlight
[sudo] password for barreeeiroo:
ln: failed to create symbolic link ‘/sys/class/backlight/brightness’: Operation not permitted
barreeeiroo@Debian-Diego ~>


I've adapted the route to my computer



Then I tried to use chmod and chown, but is the same problem.




So, my questions are:



  1. Is possible to fix that error?

  2. Is there any other method to manage brightness in Debian?

Thanks










share|improve this question























  • If you have "Operation not permitted" on chmod or chown make sure to run the commands as root (using e.g. sudo)
    – Anthon
    Aug 6 '16 at 11:40










  • The same @Anthon, not working
    – Diego Barreiro
    Aug 6 '16 at 11:49










  • I believe xrandr also has a backlight brightness setting - I think that uses a different mechanism to accomplish it, so maybe you'll have more luck that way? (note that there's a backlight brightness and 'artificial' brightness setting - make sure you have the right one)
    – Wyatt8740
    Aug 6 '16 at 14:01










  • So, how to use xrandr in my laptop? @Wyatt8740
    – Diego Barreiro
    Aug 6 '16 at 14:08






  • 1




    in that case as I said run xrandr without args to list outputs.
    – Wyatt8740
    Aug 7 '16 at 5:03
















3














I have my ASUS X556U with DualBoot between W10 and Debian Jessie, but I need to regulate the brightness.



I've been serching in Google and I found xbacklight, but I have a problem while executing it:



barreeeiroo@Debian-Diego ~> xbacklight -dec 10
No outputs have backlight property
barreeeiroo@Debian-Diego ~>



Then I search in Google more info about the problem, and I found this post, but it causes another problem:



barreeeiroo@Debian-Diego ~> 
sudo ln -s /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/rtsx_usb_sdmmc.4/leds/mmc0::/brightness /sys/class/backlight
[sudo] password for barreeeiroo:
ln: failed to create symbolic link ‘/sys/class/backlight/brightness’: Operation not permitted
barreeeiroo@Debian-Diego ~>


I've adapted the route to my computer



Then I tried to use chmod and chown, but is the same problem.




So, my questions are:



  1. Is possible to fix that error?

  2. Is there any other method to manage brightness in Debian?

Thanks










share|improve this question























  • If you have "Operation not permitted" on chmod or chown make sure to run the commands as root (using e.g. sudo)
    – Anthon
    Aug 6 '16 at 11:40










  • The same @Anthon, not working
    – Diego Barreiro
    Aug 6 '16 at 11:49










  • I believe xrandr also has a backlight brightness setting - I think that uses a different mechanism to accomplish it, so maybe you'll have more luck that way? (note that there's a backlight brightness and 'artificial' brightness setting - make sure you have the right one)
    – Wyatt8740
    Aug 6 '16 at 14:01










  • So, how to use xrandr in my laptop? @Wyatt8740
    – Diego Barreiro
    Aug 6 '16 at 14:08






  • 1




    in that case as I said run xrandr without args to list outputs.
    – Wyatt8740
    Aug 7 '16 at 5:03














3












3








3


3





I have my ASUS X556U with DualBoot between W10 and Debian Jessie, but I need to regulate the brightness.



I've been serching in Google and I found xbacklight, but I have a problem while executing it:



barreeeiroo@Debian-Diego ~> xbacklight -dec 10
No outputs have backlight property
barreeeiroo@Debian-Diego ~>



Then I search in Google more info about the problem, and I found this post, but it causes another problem:



barreeeiroo@Debian-Diego ~> 
sudo ln -s /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/rtsx_usb_sdmmc.4/leds/mmc0::/brightness /sys/class/backlight
[sudo] password for barreeeiroo:
ln: failed to create symbolic link ‘/sys/class/backlight/brightness’: Operation not permitted
barreeeiroo@Debian-Diego ~>


I've adapted the route to my computer



Then I tried to use chmod and chown, but is the same problem.




So, my questions are:



  1. Is possible to fix that error?

  2. Is there any other method to manage brightness in Debian?

Thanks










share|improve this question















I have my ASUS X556U with DualBoot between W10 and Debian Jessie, but I need to regulate the brightness.



I've been serching in Google and I found xbacklight, but I have a problem while executing it:



barreeeiroo@Debian-Diego ~> xbacklight -dec 10
No outputs have backlight property
barreeeiroo@Debian-Diego ~>



Then I search in Google more info about the problem, and I found this post, but it causes another problem:



barreeeiroo@Debian-Diego ~> 
sudo ln -s /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/rtsx_usb_sdmmc.4/leds/mmc0::/brightness /sys/class/backlight
[sudo] password for barreeeiroo:
ln: failed to create symbolic link ‘/sys/class/backlight/brightness’: Operation not permitted
barreeeiroo@Debian-Diego ~>


I've adapted the route to my computer



Then I tried to use chmod and chown, but is the same problem.




So, my questions are:



  1. Is possible to fix that error?

  2. Is there any other method to manage brightness in Debian?

Thanks







debian display backlight






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Apr 13 '17 at 12:22









Community

1




1










asked Aug 6 '16 at 11:20









Diego Barreiro

1613




1613











  • If you have "Operation not permitted" on chmod or chown make sure to run the commands as root (using e.g. sudo)
    – Anthon
    Aug 6 '16 at 11:40










  • The same @Anthon, not working
    – Diego Barreiro
    Aug 6 '16 at 11:49










  • I believe xrandr also has a backlight brightness setting - I think that uses a different mechanism to accomplish it, so maybe you'll have more luck that way? (note that there's a backlight brightness and 'artificial' brightness setting - make sure you have the right one)
    – Wyatt8740
    Aug 6 '16 at 14:01










  • So, how to use xrandr in my laptop? @Wyatt8740
    – Diego Barreiro
    Aug 6 '16 at 14:08






  • 1




    in that case as I said run xrandr without args to list outputs.
    – Wyatt8740
    Aug 7 '16 at 5:03

















  • If you have "Operation not permitted" on chmod or chown make sure to run the commands as root (using e.g. sudo)
    – Anthon
    Aug 6 '16 at 11:40










  • The same @Anthon, not working
    – Diego Barreiro
    Aug 6 '16 at 11:49










  • I believe xrandr also has a backlight brightness setting - I think that uses a different mechanism to accomplish it, so maybe you'll have more luck that way? (note that there's a backlight brightness and 'artificial' brightness setting - make sure you have the right one)
    – Wyatt8740
    Aug 6 '16 at 14:01










  • So, how to use xrandr in my laptop? @Wyatt8740
    – Diego Barreiro
    Aug 6 '16 at 14:08






  • 1




    in that case as I said run xrandr without args to list outputs.
    – Wyatt8740
    Aug 7 '16 at 5:03
















If you have "Operation not permitted" on chmod or chown make sure to run the commands as root (using e.g. sudo)
– Anthon
Aug 6 '16 at 11:40




If you have "Operation not permitted" on chmod or chown make sure to run the commands as root (using e.g. sudo)
– Anthon
Aug 6 '16 at 11:40












The same @Anthon, not working
– Diego Barreiro
Aug 6 '16 at 11:49




The same @Anthon, not working
– Diego Barreiro
Aug 6 '16 at 11:49












I believe xrandr also has a backlight brightness setting - I think that uses a different mechanism to accomplish it, so maybe you'll have more luck that way? (note that there's a backlight brightness and 'artificial' brightness setting - make sure you have the right one)
– Wyatt8740
Aug 6 '16 at 14:01




I believe xrandr also has a backlight brightness setting - I think that uses a different mechanism to accomplish it, so maybe you'll have more luck that way? (note that there's a backlight brightness and 'artificial' brightness setting - make sure you have the right one)
– Wyatt8740
Aug 6 '16 at 14:01












So, how to use xrandr in my laptop? @Wyatt8740
– Diego Barreiro
Aug 6 '16 at 14:08




So, how to use xrandr in my laptop? @Wyatt8740
– Diego Barreiro
Aug 6 '16 at 14:08




1




1




in that case as I said run xrandr without args to list outputs.
– Wyatt8740
Aug 7 '16 at 5:03





in that case as I said run xrandr without args to list outputs.
– Wyatt8740
Aug 7 '16 at 5:03











2 Answers
2






active

oldest

votes


















4














Just managed to control my screen brightness in Debian with xrandr.



xrandr --output [your display] --brightness 0.8



You can find your display name by typing xrandr - you'll see it as something like "[your display] connected primary 1920x1080..."



Next up... key bindings!






share|improve this answer
















  • 2




    According to man xrandr: “--brightness brightness […] However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.”
    – Denilson Sá Maia
    Jun 26 at 14:47



















4














Arch Linux has the following to say about xbacklight:




Brightness can be set using the xorg-xbacklight package.



Note: xbacklight only works with intel. Radeon does not support the
RandR backlight property. xbacklight currently does not work with the
modesetting driver.



To set brightness to 50% of maximum:



$ xbacklight -set 50


Increments can be used instead of absolute values, for example to
increase or decrease brightness by 10%:



$ xbacklight -inc 10
$ xbacklight -dec 10


If you get the "No outputs have backlight property" error, it is
because xrandr/xbacklight does not choose the right directory in
/sys/class/backlight. You can specify the directory by setting the
Backlight option of the device section in xorg.conf. For instance, if
the name of the directory is intel_backlight, the device section can
be configured as follows:



/etc/X11/xorg.conf
-------------------
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection



The following worked for me on Debian Stretch LXDE.



  1. Checked the backlight directory: ls /sys/class/backlight. I happen to have intel_backlight.


  2. To get the Identifier, I ran xrandr --verbose. Mine happened to be 0x72.



  3. Checking /etc/X11/, I found no xorg.conf, so I made my own and entered the information I had found:



    Section "Device"
    Identifier "0x72"
    Driver "intel"
    Option "Backlight" "intel_backlight"
    EndSection


  4. I then rebooted. It worked from there.



  5. Since LXDE runs openbox, I edited ~/.config/openbox/lxde-rc.xml and inserted the following keybindings:



    <!-- Increase backlight 10% -->
    <keybind key="XF86MonBrightnessUp">
    <action name="Execute">
    <command>xbacklight -inc 10</command>
    </action>
    </keybind>

    <!-- Decrease backlight 10% -->
    <keybind key="XF86MonBrightnessDown">
    <action name="Execute">
    <command>xbacklight -dec 10</command>
    </action>
    </keybind>






share|improve this answer






















  • For me the best solution since xrandr could not increase the brightness.
    – omisson
    Aug 27 at 18:59










Your Answer








StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);

else
createEditor();

);

function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);



);













draft saved

draft discarded


















StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f301724%2fxbacklight-not-working%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown

























2 Answers
2






active

oldest

votes








2 Answers
2






active

oldest

votes









active

oldest

votes






active

oldest

votes









4














Just managed to control my screen brightness in Debian with xrandr.



xrandr --output [your display] --brightness 0.8



You can find your display name by typing xrandr - you'll see it as something like "[your display] connected primary 1920x1080..."



Next up... key bindings!






share|improve this answer
















  • 2




    According to man xrandr: “--brightness brightness […] However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.”
    – Denilson Sá Maia
    Jun 26 at 14:47
















4














Just managed to control my screen brightness in Debian with xrandr.



xrandr --output [your display] --brightness 0.8



You can find your display name by typing xrandr - you'll see it as something like "[your display] connected primary 1920x1080..."



Next up... key bindings!






share|improve this answer
















  • 2




    According to man xrandr: “--brightness brightness […] However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.”
    – Denilson Sá Maia
    Jun 26 at 14:47














4












4








4






Just managed to control my screen brightness in Debian with xrandr.



xrandr --output [your display] --brightness 0.8



You can find your display name by typing xrandr - you'll see it as something like "[your display] connected primary 1920x1080..."



Next up... key bindings!






share|improve this answer












Just managed to control my screen brightness in Debian with xrandr.



xrandr --output [your display] --brightness 0.8



You can find your display name by typing xrandr - you'll see it as something like "[your display] connected primary 1920x1080..."



Next up... key bindings!







share|improve this answer












share|improve this answer



share|improve this answer










answered Jan 29 '17 at 6:01









vickylai

493




493







  • 2




    According to man xrandr: “--brightness brightness […] However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.”
    – Denilson Sá Maia
    Jun 26 at 14:47













  • 2




    According to man xrandr: “--brightness brightness […] However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.”
    – Denilson Sá Maia
    Jun 26 at 14:47








2




2




According to man xrandr: “--brightness brightness […] However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.”
– Denilson Sá Maia
Jun 26 at 14:47





According to man xrandr: “--brightness brightness […] However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.”
– Denilson Sá Maia
Jun 26 at 14:47














4














Arch Linux has the following to say about xbacklight:




Brightness can be set using the xorg-xbacklight package.



Note: xbacklight only works with intel. Radeon does not support the
RandR backlight property. xbacklight currently does not work with the
modesetting driver.



To set brightness to 50% of maximum:



$ xbacklight -set 50


Increments can be used instead of absolute values, for example to
increase or decrease brightness by 10%:



$ xbacklight -inc 10
$ xbacklight -dec 10


If you get the "No outputs have backlight property" error, it is
because xrandr/xbacklight does not choose the right directory in
/sys/class/backlight. You can specify the directory by setting the
Backlight option of the device section in xorg.conf. For instance, if
the name of the directory is intel_backlight, the device section can
be configured as follows:



/etc/X11/xorg.conf
-------------------
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection



The following worked for me on Debian Stretch LXDE.



  1. Checked the backlight directory: ls /sys/class/backlight. I happen to have intel_backlight.


  2. To get the Identifier, I ran xrandr --verbose. Mine happened to be 0x72.



  3. Checking /etc/X11/, I found no xorg.conf, so I made my own and entered the information I had found:



    Section "Device"
    Identifier "0x72"
    Driver "intel"
    Option "Backlight" "intel_backlight"
    EndSection


  4. I then rebooted. It worked from there.



  5. Since LXDE runs openbox, I edited ~/.config/openbox/lxde-rc.xml and inserted the following keybindings:



    <!-- Increase backlight 10% -->
    <keybind key="XF86MonBrightnessUp">
    <action name="Execute">
    <command>xbacklight -inc 10</command>
    </action>
    </keybind>

    <!-- Decrease backlight 10% -->
    <keybind key="XF86MonBrightnessDown">
    <action name="Execute">
    <command>xbacklight -dec 10</command>
    </action>
    </keybind>






share|improve this answer






















  • For me the best solution since xrandr could not increase the brightness.
    – omisson
    Aug 27 at 18:59















4














Arch Linux has the following to say about xbacklight:




Brightness can be set using the xorg-xbacklight package.



Note: xbacklight only works with intel. Radeon does not support the
RandR backlight property. xbacklight currently does not work with the
modesetting driver.



To set brightness to 50% of maximum:



$ xbacklight -set 50


Increments can be used instead of absolute values, for example to
increase or decrease brightness by 10%:



$ xbacklight -inc 10
$ xbacklight -dec 10


If you get the "No outputs have backlight property" error, it is
because xrandr/xbacklight does not choose the right directory in
/sys/class/backlight. You can specify the directory by setting the
Backlight option of the device section in xorg.conf. For instance, if
the name of the directory is intel_backlight, the device section can
be configured as follows:



/etc/X11/xorg.conf
-------------------
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection



The following worked for me on Debian Stretch LXDE.



  1. Checked the backlight directory: ls /sys/class/backlight. I happen to have intel_backlight.


  2. To get the Identifier, I ran xrandr --verbose. Mine happened to be 0x72.



  3. Checking /etc/X11/, I found no xorg.conf, so I made my own and entered the information I had found:



    Section "Device"
    Identifier "0x72"
    Driver "intel"
    Option "Backlight" "intel_backlight"
    EndSection


  4. I then rebooted. It worked from there.



  5. Since LXDE runs openbox, I edited ~/.config/openbox/lxde-rc.xml and inserted the following keybindings:



    <!-- Increase backlight 10% -->
    <keybind key="XF86MonBrightnessUp">
    <action name="Execute">
    <command>xbacklight -inc 10</command>
    </action>
    </keybind>

    <!-- Decrease backlight 10% -->
    <keybind key="XF86MonBrightnessDown">
    <action name="Execute">
    <command>xbacklight -dec 10</command>
    </action>
    </keybind>






share|improve this answer






















  • For me the best solution since xrandr could not increase the brightness.
    – omisson
    Aug 27 at 18:59













4












4








4






Arch Linux has the following to say about xbacklight:




Brightness can be set using the xorg-xbacklight package.



Note: xbacklight only works with intel. Radeon does not support the
RandR backlight property. xbacklight currently does not work with the
modesetting driver.



To set brightness to 50% of maximum:



$ xbacklight -set 50


Increments can be used instead of absolute values, for example to
increase or decrease brightness by 10%:



$ xbacklight -inc 10
$ xbacklight -dec 10


If you get the "No outputs have backlight property" error, it is
because xrandr/xbacklight does not choose the right directory in
/sys/class/backlight. You can specify the directory by setting the
Backlight option of the device section in xorg.conf. For instance, if
the name of the directory is intel_backlight, the device section can
be configured as follows:



/etc/X11/xorg.conf
-------------------
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection



The following worked for me on Debian Stretch LXDE.



  1. Checked the backlight directory: ls /sys/class/backlight. I happen to have intel_backlight.


  2. To get the Identifier, I ran xrandr --verbose. Mine happened to be 0x72.



  3. Checking /etc/X11/, I found no xorg.conf, so I made my own and entered the information I had found:



    Section "Device"
    Identifier "0x72"
    Driver "intel"
    Option "Backlight" "intel_backlight"
    EndSection


  4. I then rebooted. It worked from there.



  5. Since LXDE runs openbox, I edited ~/.config/openbox/lxde-rc.xml and inserted the following keybindings:



    <!-- Increase backlight 10% -->
    <keybind key="XF86MonBrightnessUp">
    <action name="Execute">
    <command>xbacklight -inc 10</command>
    </action>
    </keybind>

    <!-- Decrease backlight 10% -->
    <keybind key="XF86MonBrightnessDown">
    <action name="Execute">
    <command>xbacklight -dec 10</command>
    </action>
    </keybind>






share|improve this answer














Arch Linux has the following to say about xbacklight:




Brightness can be set using the xorg-xbacklight package.



Note: xbacklight only works with intel. Radeon does not support the
RandR backlight property. xbacklight currently does not work with the
modesetting driver.



To set brightness to 50% of maximum:



$ xbacklight -set 50


Increments can be used instead of absolute values, for example to
increase or decrease brightness by 10%:



$ xbacklight -inc 10
$ xbacklight -dec 10


If you get the "No outputs have backlight property" error, it is
because xrandr/xbacklight does not choose the right directory in
/sys/class/backlight. You can specify the directory by setting the
Backlight option of the device section in xorg.conf. For instance, if
the name of the directory is intel_backlight, the device section can
be configured as follows:



/etc/X11/xorg.conf
-------------------
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection



The following worked for me on Debian Stretch LXDE.



  1. Checked the backlight directory: ls /sys/class/backlight. I happen to have intel_backlight.


  2. To get the Identifier, I ran xrandr --verbose. Mine happened to be 0x72.



  3. Checking /etc/X11/, I found no xorg.conf, so I made my own and entered the information I had found:



    Section "Device"
    Identifier "0x72"
    Driver "intel"
    Option "Backlight" "intel_backlight"
    EndSection


  4. I then rebooted. It worked from there.



  5. Since LXDE runs openbox, I edited ~/.config/openbox/lxde-rc.xml and inserted the following keybindings:



    <!-- Increase backlight 10% -->
    <keybind key="XF86MonBrightnessUp">
    <action name="Execute">
    <command>xbacklight -inc 10</command>
    </action>
    </keybind>

    <!-- Decrease backlight 10% -->
    <keybind key="XF86MonBrightnessDown">
    <action name="Execute">
    <command>xbacklight -dec 10</command>
    </action>
    </keybind>







share|improve this answer














share|improve this answer



share|improve this answer








edited Dec 19 at 13:10

























answered Aug 10 '17 at 2:50









Lorem Ipsum

1736




1736











  • For me the best solution since xrandr could not increase the brightness.
    – omisson
    Aug 27 at 18:59
















  • For me the best solution since xrandr could not increase the brightness.
    – omisson
    Aug 27 at 18:59















For me the best solution since xrandr could not increase the brightness.
– omisson
Aug 27 at 18:59




For me the best solution since xrandr could not increase the brightness.
– omisson
Aug 27 at 18:59

















draft saved

draft discarded
















































Thanks for contributing an answer to Unix & Linux Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid


  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.





Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


Please pay close attention to the following guidance:


  • Please be sure to answer the question. Provide details and share your research!

But avoid


  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f301724%2fxbacklight-not-working%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown






Popular posts from this blog

How to check contact read email or not when send email to Individual?

Displaying single band from multi-band raster using QGIS

How many registers does an x86_64 CPU actually have?