QGIS - label placement in print composer
Clash Royale CLAN TAG#URR8PPP
up vote
2
down vote
favorite
I have managed to do manual placement of labels in QGIS 2.18 so that they are all showing without overlapping. However, when I create the map in print composer the labels do not stay in their same positions as the main screen and end up potentially overlapping again in places. The only way I can seem to resolve this is by going back to the main screen and moving them there before trying print composer again and this something requires toggling back and forth until it is correct. Surely they must be an easier way? What am I missing?
qgis labeling print-composer
asked Nov 28 at 15:10
Rebecca
322
add a comment |
up vote
2
down vote
favorite
I have managed to do manual placement of labels in QGIS 2.18 so that they are all showing without overlapping. However, when I create the map in print composer the labels do not stay in their same positions as the main screen and end up potentially overlapping again in places. The only way I can seem to resolve this is by going back to the main screen and moving them there before trying print composer again and this something requires toggling back and forth until it is correct. Surely they must be an easier way? What am I missing?
qgis labeling print-composer
asked Nov 28 at 15:10
Rebecca
322
Usually maps in the print composer have a different resolution from your main screen, thus throwing off the alignment of labels.
– Erik
Nov 28 at 15:18
2
Make sure the scale of the map you're setting your labels at is the same as the scale of your print composer.
– DPSSpatial
Nov 28 at 15:27
add a comment |
up vote
2
down vote
favorite
up vote
2
down vote
favorite
I have managed to do manual placement of labels in QGIS 2.18 so that they are all showing without overlapping. However, when I create the map in print composer the labels do not stay in their same positions as the main screen and end up potentially overlapping again in places. The only way I can seem to resolve this is by going back to the main screen and moving them there before trying print composer again and this something requires toggling back and forth until it is correct. Surely they must be an easier way? What am I missing?
qgis labeling print-composer
asked Nov 28 at 15:10
Rebecca
322
I have managed to do manual placement of labels in QGIS 2.18 so that they are all showing without overlapping. However, when I create the map in print composer the labels do not stay in their same positions as the main screen and end up potentially overlapping again in places. The only way I can seem to resolve this is by going back to the main screen and moving them there before trying print composer again and this something requires toggling back and forth until it is correct. Surely they must be an easier way? What am I missing?
qgis labeling print-composer
qgis labeling print-composer
asked Nov 28 at 15:10
Rebecca
322
asked Nov 28 at 15:10
Rebecca
322
asked Nov 28 at 15:10
Rebecca
322
asked Nov 28 at 15:10
Rebecca
322
asked Nov 28 at 15:10
Rebecca
322
322
Usually maps in the print composer have a different resolution from your main screen, thus throwing off the alignment of labels.
– Erik
Nov 28 at 15:18
2
Make sure the scale of the map you're setting your labels at is the same as the scale of your print composer.
– DPSSpatial
Nov 28 at 15:27
add a comment |
Usually maps in the print composer have a different resolution from your main screen, thus throwing off the alignment of labels.
– Erik
Nov 28 at 15:18
2
Make sure the scale of the map you're setting your labels at is the same as the scale of your print composer.
– DPSSpatial
Nov 28 at 15:27
Usually maps in the print composer have a different resolution from your main screen, thus throwing off the alignment of labels.
– Erik
Nov 28 at 15:18
Usually maps in the print composer have a different resolution from your main screen, thus throwing off the alignment of labels.
– Erik
Nov 28 at 15:18
2
2
Make sure the scale of the map you're setting your labels at is the same as the scale of your print composer.
– DPSSpatial
Nov 28 at 15:27
Make sure the scale of the map you're setting your labels at is the same as the scale of your print composer.
– DPSSpatial
Nov 28 at 15:27
add a comment |
1 Answer
1
active
oldest
votes
up vote
4
down vote
accepted
That's probably due to a scale difference between your main screen and your print composer.(as the anchor of the label is just a point at the start of label text, if the label stay the same size at all zoom level and the scale of the background change the label seem to move)
To prevent that you could try to:
- set the label size to map unit (just under the box where you set the label text size there is a box wich let you choose between point and map unit), after that you will need to choose a label size (don't be afraid by big number) that look as you want in the print composer (to know how it will look in print composer set the main screen at the same scale as your print composer)
OR
- Set the scale of the main screen at the same scale of the print composer and lock the scale by clicking on the small lock next to the scale box (bottom of screen), if you need to zoom use the Magnifier box just next.
any of the two option should ensure that the position of your label are identical in main screen and in print composer but you probably will need to (again...) manually place the overlaping label...
answered Nov 28 at 15:31
J.R
2,820219
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
4
down vote
accepted
That's probably due to a scale difference between your main screen and your print composer.(as the anchor of the label is just a point at the start of label text, if the label stay the same size at all zoom level and the scale of the background change the label seem to move)
To prevent that you could try to:
- set the label size to map unit (just under the box where you set the label text size there is a box wich let you choose between point and map unit), after that you will need to choose a label size (don't be afraid by big number) that look as you want in the print composer (to know how it will look in print composer set the main screen at the same scale as your print composer)
OR
- Set the scale of the main screen at the same scale of the print composer and lock the scale by clicking on the small lock next to the scale box (bottom of screen), if you need to zoom use the Magnifier box just next.
any of the two option should ensure that the position of your label are identical in main screen and in print composer but you probably will need to (again...) manually place the overlaping label...
answered Nov 28 at 15:31
J.R
2,820219
add a comment |
up vote
4
down vote
accepted
That's probably due to a scale difference between your main screen and your print composer.(as the anchor of the label is just a point at the start of label text, if the label stay the same size at all zoom level and the scale of the background change the label seem to move)
To prevent that you could try to:
- set the label size to map unit (just under the box where you set the label text size there is a box wich let you choose between point and map unit), after that you will need to choose a label size (don't be afraid by big number) that look as you want in the print composer (to know how it will look in print composer set the main screen at the same scale as your print composer)
OR
- Set the scale of the main screen at the same scale of the print composer and lock the scale by clicking on the small lock next to the scale box (bottom of screen), if you need to zoom use the Magnifier box just next.
any of the two option should ensure that the position of your label are identical in main screen and in print composer but you probably will need to (again...) manually place the overlaping label...
answered Nov 28 at 15:31
J.R
2,820219
add a comment |
up vote
4
down vote
accepted
up vote
4
down vote
accepted
That's probably due to a scale difference between your main screen and your print composer.(as the anchor of the label is just a point at the start of label text, if the label stay the same size at all zoom level and the scale of the background change the label seem to move)
To prevent that you could try to:
- set the label size to map unit (just under the box where you set the label text size there is a box wich let you choose between point and map unit), after that you will need to choose a label size (don't be afraid by big number) that look as you want in the print composer (to know how it will look in print composer set the main screen at the same scale as your print composer)
OR
- Set the scale of the main screen at the same scale of the print composer and lock the scale by clicking on the small lock next to the scale box (bottom of screen), if you need to zoom use the Magnifier box just next.
any of the two option should ensure that the position of your label are identical in main screen and in print composer but you probably will need to (again...) manually place the overlaping label...
answered Nov 28 at 15:31
J.R
2,820219
That's probably due to a scale difference between your main screen and your print composer.(as the anchor of the label is just a point at the start of label text, if the label stay the same size at all zoom level and the scale of the background change the label seem to move)
To prevent that you could try to:
- set the label size to map unit (just under the box where you set the label text size there is a box wich let you choose between point and map unit), after that you will need to choose a label size (don't be afraid by big number) that look as you want in the print composer (to know how it will look in print composer set the main screen at the same scale as your print composer)
OR
- Set the scale of the main screen at the same scale of the print composer and lock the scale by clicking on the small lock next to the scale box (bottom of screen), if you need to zoom use the Magnifier box just next.
any of the two option should ensure that the position of your label are identical in main screen and in print composer but you probably will need to (again...) manually place the overlaping label...
answered Nov 28 at 15:31
J.R
2,820219
edited Nov 28 at 15:58
answered Nov 28 at 15:31
J.R
2,820219
answered Nov 28 at 15:31
J.R
2,820219
answered Nov 28 at 15:31
J.R
2,820219
2,820219
add a comment |
add a comment |
Thanks for contributing an answer to Geographic Information Systems Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fgis.stackexchange.com%2fquestions%2f304255%2fqgis-label-placement-in-print-composer%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Usually maps in the print composer have a different resolution from your main screen, thus throwing off the alignment of labels.
– Erik
Nov 28 at 15:18
2
Make sure the scale of the map you're setting your labels at is the same as the scale of your print composer.
– DPSSpatial
Nov 28 at 15:27