Mahalaxmi Express


































Mahalaxmi Express
17411 Mahalaxmi Express trainboard.jpg
Overview
Service typeExpress
Current operator(s)South Central Railways
Route
StartMumbai CST
Stops18 as 17411 Mahalaxmi Express, 19 as 17412 Mahalaxmi Express
EndKolhapur
Distance travelled518 km (322 mi)
Service frequencyDaily
On-board services
Class(es)AC 1st Class, AC 2 tier, AC 3 tier, Sleeper Class, General Unreserved
Seating arrangementsYes
Sleeping arrangementsYes
Catering facilitiesNo Pantry Car but available
Observation facilitiesRake Sharing with 17415/16 Haripriya Express
Technical
Rolling stockStandard Indian Railway coaches
Track gauge
1,676 mm (5 ft 6 in)
Operating speed110 km/h (68 mph) maximum
47.38 km/h (29 mph), including halts
Route map
Koyna Express and Sahyadri Express Route map.jpg

The 17411/17412 Mahalaxmi Express is an express train belonging to Indian Railways that runs between Mumbai and Kolhapur in India. It is a daily service. It operates as train number 17411 from Mumbai CST to Kolhapur and as train number 17412 in the reverse direction.before guage conversion,this train was run in two parts.1- Bangalore-Miraj Mahalaxmi meterguage express.2-Kolhapur -Miraj-Mumbai Mahalaxmi
express.After guage conversation Miraj-Bangalore train was discontinued and new direct train between Kurla and bangalore was introduced.




Contents





  • 1 Coaches


  • 2 Service


  • 3 Traction


  • 4 External links




Coaches


The 17411/7412 Mahalaxmi Express presently has 1 AC 1st Class cum AC 2 tier, 1 AC 2 tier, 2 AC 3 tier, 13 Sleeper Class & 4 General Unreserved coaches. As with most train services in India, Coach Composition may be amended at the discretion of Indian Railways depending on demand.




17411 Mahalaxmi Express - AC 3 tier coach



Service


This train used to run between Mangaluru centraland [Miraj]] via Hassan Junction, Arsikere Junction, Kadur Junction, Hubballi Junction, Londa Junction during Nineties. Then due to gauge conversion this train was discontinued. Later introduced as CSTM-Kolhapur Mahalaxmi express. Its last run was in the year 1994.


Now 17411 Mahalaxmi Express covers the distance of 518 kilometres in 10 hours 57 mins (47.31 km/hr) & 10 hours 55 mins as 17412 Mahalaxmi Express (47.45 km/hr).


As its average speed in both directions is below 55 km/hr as per Indian Railway rules, it does not have a Superfast surcharge.



Traction


Dual traction WCAM 2/2P or WCAM 3 locos haul the train from Mumbai CST until Pune Junction after which a Pune based WDM 3A Or WDP 4 takes over until Kolhapur.



External links


  • https://web.archive.org/web/20160314234300/http://enquiry.indianrail.gov.in/ntes/

-

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
Read more