National Maritime Board
Multi tool use- This is about the Maritime Board in the United Kingdom. For the Board in the Philippines, see National Seamen Board.
The National Maritime Board (NMB) was a bilateral board governing wages and working practices in the British shipping industry.
It was founded in November 1917 against a backdrop of strike action amongst seafarers and was originally intended as a purely wartime measure to facilitate wage negotiations in a period of rapid inflation. It built upon the union-employer relationship that had emerged during the war years and brought together representatives of the Shipping Federation, the National Union of Seamen and the National Union of Ship's Stewards, as well as some smaller unions in the industry, but allowing the British Seafarers' Union only local representation. In 1919 the board was re-established as a permanent body and set about establishing national wage rates for all grades, the first time such rates had been enforced. Aylmer Vallance was appointed as the board's General Secretary.[1]
In the 1920s, the board imposed a series of wage reductions with the support of the National Union of Seamen. The Ship's Stewards Union opposed the first of these reductions in 1921, and its members were locked out. At this time, the board also became embroiled in controversies over the policy of Joint Control introduced by the NUS and Shipping Federation. This arrangement aimed to ensure that seafarers could only gain employment if in possession of a form endorsed by both the union and the employers' organisation. It was allegedly widely used to force out of employment members of rival unions, communists, and other 'agitators'.
Later history is unclear: the University of Warwick's Modern Records Centre states that "the records of the Board currently held [...] end in 1985 [...] and it is not known how the organisation continued to operate after this time".
References
^ Geoffrey Cox, "The editor who made love - and great news", British Journalism Review 1996 7: 16
External links
Catalogue of the NMB archives, held at the Modern Records Centre, University of Warwick
QAoWvSpp,F6QScS FPhmi9a
Popular posts from this blog
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  | up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
