Kirr is an island in the Darss-Zingst Bodden Chain south of the Zingst Peninsula on the German Baltic Sea coast. It is separated from the peninsula by the Zingster Strom. The island is a nature reserve within the Western Pomerania Lagoon Area National Park. It was formerly and is sometimes still called Großer Kirr or Große Kirr ("Great Kirr"). This is to distinguish it from the northwestern part of the island, which was still a separate albeit much smaller island in the Zingster Strom in the second half of the 20th century, that used to be called Kleiner Kirr or Kleine Kirr ("Small Kirr").
Contents
1Geography
2Flora and fauna
3History
4External links
Geography
The island has a length of 3.5 km, a maximum width of 1.5 km and only rises one metre above sea level. It lies in the lagoon of Barther Bodden on the Baltic Sea coast of north Germany, just a few metres south of the Baltic seaside resort of Zingst. On the east side of the island is the small hamlet of Klein Kirr; in the north are the ruins of an old farmstead.
Flora and fauna
The island is covered by salt marshes and dissected by creeks. It is an ideal breeding ground for numerous birds, especially waders like dunlin, ruff, redshank, black-tailed godwit, oystercatcher, avocet and lapwing as well as the black-headed gull. In autumn the island acts as a resting place for several thousand crane over several weeks as they migrate south. As a consequence of its natural importance, walking on the island or landing boats there without permission is forbidden.
History
Around 1700, the Kirr had three owners, the Amt of Barth (331.6 hectares), the town of Barth (219 hectares) and the Horn family from Divitz (20 hectares). The island was managed by a farmstead and was mainly used by several tenants who grazed cattle and raised crops. They were also allowed to fish around the island. Today the Kirr is still used for cattle pasture. In order to get the cows to their grazing fields there is a cattle ferry to the island from the village of Müggenburg.
Klein Kirr on the island of Kirr
Cow ferry to the island of Kirr
External links
Website of the national park
Literature about Kirr in the State Bibliography (Landesbibliographie) of Mecklenburg-Vorpommern
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  | up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
