Old Work Box for Vanity Light?
Clash Royale CLAN TAG#URR8PPP
So I went to go change my bathroom vanity light today and discovered that it simply had the wiring coming through a hole in the wall and the previous vanity was literally just screwed into the wall with 2 screws.
Went to the local home improvement store and the employees guided me to some old work boxes that look like this:
So I get it installed, but it had me wondering...is this safe? I mean the vanity light isn't THAT heavy (I weighed it at around 3 lbs). I do not have a stud nearby (that I can see anyways) (nor would it matter because I would need to have access behind it anyways), and I really don't want to be tearing out an entire wall ideally)
Is this ok? I looked at various guides on changing or adding vanity lights and most seem to use these boxes (Which "seem" to be rated for 6 lb's, and only mention NOT to use them for ceilings).
electrical old-work
edited Jan 13 at 14:14
pkamb
13718
asked Jan 13 at 1:30
msmith1114msmith1114
179110
add a comment |
So I went to go change my bathroom vanity light today and discovered that it simply had the wiring coming through a hole in the wall and the previous vanity was literally just screwed into the wall with 2 screws.
Went to the local home improvement store and the employees guided me to some old work boxes that look like this:
So I get it installed, but it had me wondering...is this safe? I mean the vanity light isn't THAT heavy (I weighed it at around 3 lbs). I do not have a stud nearby (that I can see anyways) (nor would it matter because I would need to have access behind it anyways), and I really don't want to be tearing out an entire wall ideally)
Is this ok? I looked at various guides on changing or adding vanity lights and most seem to use these boxes (Which "seem" to be rated for 6 lb's, and only mention NOT to use them for ceilings).
electrical old-work
edited Jan 13 at 14:14
pkamb
13718
asked Jan 13 at 1:30
msmith1114msmith1114
179110
add a comment |
So I went to go change my bathroom vanity light today and discovered that it simply had the wiring coming through a hole in the wall and the previous vanity was literally just screwed into the wall with 2 screws.
Went to the local home improvement store and the employees guided me to some old work boxes that look like this:
So I get it installed, but it had me wondering...is this safe? I mean the vanity light isn't THAT heavy (I weighed it at around 3 lbs). I do not have a stud nearby (that I can see anyways) (nor would it matter because I would need to have access behind it anyways), and I really don't want to be tearing out an entire wall ideally)
Is this ok? I looked at various guides on changing or adding vanity lights and most seem to use these boxes (Which "seem" to be rated for 6 lb's, and only mention NOT to use them for ceilings).
electrical old-work
edited Jan 13 at 14:14
pkamb
13718
asked Jan 13 at 1:30
msmith1114msmith1114
179110
So I went to go change my bathroom vanity light today and discovered that it simply had the wiring coming through a hole in the wall and the previous vanity was literally just screwed into the wall with 2 screws.
Went to the local home improvement store and the employees guided me to some old work boxes that look like this:
So I get it installed, but it had me wondering...is this safe? I mean the vanity light isn't THAT heavy (I weighed it at around 3 lbs). I do not have a stud nearby (that I can see anyways) (nor would it matter because I would need to have access behind it anyways), and I really don't want to be tearing out an entire wall ideally)
Is this ok? I looked at various guides on changing or adding vanity lights and most seem to use these boxes (Which "seem" to be rated for 6 lb's, and only mention NOT to use them for ceilings).
electrical old-work
electrical old-work
edited Jan 13 at 14:14
pkamb
13718
asked Jan 13 at 1:30
msmith1114msmith1114
179110
edited Jan 13 at 14:14
pkamb
13718
asked Jan 13 at 1:30
msmith1114msmith1114
179110
edited Jan 13 at 14:14
pkamb
13718
edited Jan 13 at 14:14
pkamb
13718
edited Jan 13 at 14:14
pkamb
13718
13718
asked Jan 13 at 1:30
msmith1114msmith1114
179110
asked Jan 13 at 1:30
msmith1114msmith1114
179110
asked Jan 13 at 1:30
msmith1114msmith1114
179110
179110
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
Yes, an old work box is completely safe for what you're using it for. Just make sure the dogs are snug against the drywall.
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
Thanks, I mean it's not on the ceiling so really it would require the drywall to completely fail. I mean considering the last light was basically held to the wall by 2 screws I figure it can't be any worse than that!
– msmith1114
Jan 13 at 1:37
1
It's actually better off in a box than anchored to the drywall with screws. I run in to the same situation almost weekly. Lol
– BillWeckel
Jan 13 at 1:39
Better off compared to what? just 2 screws? What I had before was one of these "cheap" lights: lowes.com/pd/Project-Source-4-Light-24-05-in-Vanity-Light/…
– msmith1114
Jan 13 at 1:46
Yes, just being attached with 2 screws to the drywall.
– BillWeckel
Jan 13 at 1:47
add a comment |
I've used lots of old-work boxes of various designs and love them. When you have a heavy fixture, you need one that will support the weight (by being secured to studs or joists), but your vanity light is.... well, light.
answered Jan 13 at 2:37
SolzSolz
3443
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "73"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f154803%2fold-work-box-for-vanity-light%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Yes, an old work box is completely safe for what you're using it for. Just make sure the dogs are snug against the drywall.
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
Thanks, I mean it's not on the ceiling so really it would require the drywall to completely fail. I mean considering the last light was basically held to the wall by 2 screws I figure it can't be any worse than that!
– msmith1114
Jan 13 at 1:37
1
It's actually better off in a box than anchored to the drywall with screws. I run in to the same situation almost weekly. Lol
– BillWeckel
Jan 13 at 1:39
Better off compared to what? just 2 screws? What I had before was one of these "cheap" lights: lowes.com/pd/Project-Source-4-Light-24-05-in-Vanity-Light/…
– msmith1114
Jan 13 at 1:46
Yes, just being attached with 2 screws to the drywall.
– BillWeckel
Jan 13 at 1:47
add a comment |
Yes, an old work box is completely safe for what you're using it for. Just make sure the dogs are snug against the drywall.
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
Thanks, I mean it's not on the ceiling so really it would require the drywall to completely fail. I mean considering the last light was basically held to the wall by 2 screws I figure it can't be any worse than that!
– msmith1114
Jan 13 at 1:37
1
It's actually better off in a box than anchored to the drywall with screws. I run in to the same situation almost weekly. Lol
– BillWeckel
Jan 13 at 1:39
Better off compared to what? just 2 screws? What I had before was one of these "cheap" lights: lowes.com/pd/Project-Source-4-Light-24-05-in-Vanity-Light/…
– msmith1114
Jan 13 at 1:46
Yes, just being attached with 2 screws to the drywall.
– BillWeckel
Jan 13 at 1:47
add a comment |
Yes, an old work box is completely safe for what you're using it for. Just make sure the dogs are snug against the drywall.
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
Yes, an old work box is completely safe for what you're using it for. Just make sure the dogs are snug against the drywall.
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
answered Jan 13 at 1:35
BillWeckelBillWeckel
1,134110
1,134110
Thanks, I mean it's not on the ceiling so really it would require the drywall to completely fail. I mean considering the last light was basically held to the wall by 2 screws I figure it can't be any worse than that!
– msmith1114
Jan 13 at 1:37
1
It's actually better off in a box than anchored to the drywall with screws. I run in to the same situation almost weekly. Lol
– BillWeckel
Jan 13 at 1:39
Better off compared to what? just 2 screws? What I had before was one of these "cheap" lights: lowes.com/pd/Project-Source-4-Light-24-05-in-Vanity-Light/…
– msmith1114
Jan 13 at 1:46
Yes, just being attached with 2 screws to the drywall.
– BillWeckel
Jan 13 at 1:47
add a comment |
Thanks, I mean it's not on the ceiling so really it would require the drywall to completely fail. I mean considering the last light was basically held to the wall by 2 screws I figure it can't be any worse than that!
– msmith1114
Jan 13 at 1:37
1
It's actually better off in a box than anchored to the drywall with screws. I run in to the same situation almost weekly. Lol
– BillWeckel
Jan 13 at 1:39
Better off compared to what? just 2 screws? What I had before was one of these "cheap" lights: lowes.com/pd/Project-Source-4-Light-24-05-in-Vanity-Light/…
– msmith1114
Jan 13 at 1:46
Yes, just being attached with 2 screws to the drywall.
– BillWeckel
Jan 13 at 1:47
Thanks, I mean it's not on the ceiling so really it would require the drywall to completely fail. I mean considering the last light was basically held to the wall by 2 screws I figure it can't be any worse than that!
– msmith1114
Jan 13 at 1:37
Thanks, I mean it's not on the ceiling so really it would require the drywall to completely fail. I mean considering the last light was basically held to the wall by 2 screws I figure it can't be any worse than that!
– msmith1114
Jan 13 at 1:37
1
1
It's actually better off in a box than anchored to the drywall with screws. I run in to the same situation almost weekly. Lol
– BillWeckel
Jan 13 at 1:39
It's actually better off in a box than anchored to the drywall with screws. I run in to the same situation almost weekly. Lol
– BillWeckel
Jan 13 at 1:39
Better off compared to what? just 2 screws? What I had before was one of these "cheap" lights: lowes.com/pd/Project-Source-4-Light-24-05-in-Vanity-Light/…
– msmith1114
Jan 13 at 1:46
Better off compared to what? just 2 screws? What I had before was one of these "cheap" lights: lowes.com/pd/Project-Source-4-Light-24-05-in-Vanity-Light/…
– msmith1114
Jan 13 at 1:46
Yes, just being attached with 2 screws to the drywall.
– BillWeckel
Jan 13 at 1:47
Yes, just being attached with 2 screws to the drywall.
– BillWeckel
Jan 13 at 1:47
add a comment |
I've used lots of old-work boxes of various designs and love them. When you have a heavy fixture, you need one that will support the weight (by being secured to studs or joists), but your vanity light is.... well, light.
answered Jan 13 at 2:37
SolzSolz
3443
add a comment |
I've used lots of old-work boxes of various designs and love them. When you have a heavy fixture, you need one that will support the weight (by being secured to studs or joists), but your vanity light is.... well, light.
answered Jan 13 at 2:37
SolzSolz
3443
add a comment |
I've used lots of old-work boxes of various designs and love them. When you have a heavy fixture, you need one that will support the weight (by being secured to studs or joists), but your vanity light is.... well, light.
answered Jan 13 at 2:37
SolzSolz
3443
I've used lots of old-work boxes of various designs and love them. When you have a heavy fixture, you need one that will support the weight (by being secured to studs or joists), but your vanity light is.... well, light.
answered Jan 13 at 2:37
SolzSolz
3443
answered Jan 13 at 2:37
SolzSolz
3443
answered Jan 13 at 2:37
SolzSolz
3443
answered Jan 13 at 2:37
SolzSolz
3443
3443
add a comment |
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f154803%2fold-work-box-for-vanity-light%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown