no sound in antergos

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP











up vote
0
down vote

favorite












so i recently installed antergos on my laptop and i get no sound out of my speakers or my headphones - hdmi out does not work either. i have tried going into alsa mixer and its not muted.



 $ inxi -xA
Audio: Card-1 bytcht-es8316 driver: bytcht-es8316
 Card-2 Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
 Sound: Advanced Linux Sound Architecture v: k4.15.8-1-ARCH


upon trying speaker-test -c2 i get this 



speaker-test 1.1.5

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 16 to 204800
Period size range from 8 to 102400
Using max buffer size 204800
Periods = 4
Unable to set hw params for playback: Invalid argument
Setting of hwparams failed: Invalid argument


and trying pavucontrol just sits there establishing connection.



trying lspci -nn | grep Audio gives me no output but lspci gives me this



 lspci
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 36)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers (rev 36)
00:03.0 Multimedia controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit (rev 36)
00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 36)
00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 36)
00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 36)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 36)


upon trying usermod -aG audio no change



other things i have tried include 



alsa force-reload


.



killall pulseaudio; rm -r ~/.config/pulse/* ; rm -r ~/.pulse*


.



amixer sset Master unmute
amixer: Unable to find simple control 'Master',0


any help would be appreciated




linux audio antergos




share|improve this question


























    up vote
    0
    down vote

    favorite












    so i recently installed antergos on my laptop and i get no sound out of my speakers or my headphones - hdmi out does not work either. i have tried going into alsa mixer and its not muted.



     $ inxi -xA
    Audio: Card-1 bytcht-es8316 driver: bytcht-es8316
     Card-2 Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
     Sound: Advanced Linux Sound Architecture v: k4.15.8-1-ARCH


    upon trying speaker-test -c2 i get this 



    speaker-test 1.1.5

    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 16 to 204800
    Period size range from 8 to 102400
    Using max buffer size 204800
    Periods = 4
    Unable to set hw params for playback: Invalid argument
    Setting of hwparams failed: Invalid argument


    and trying pavucontrol just sits there establishing connection.



    trying lspci -nn | grep Audio gives me no output but lspci gives me this



     lspci
    00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 36)
    00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers (rev 36)
    00:03.0 Multimedia controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit (rev 36)
    00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 36)
    00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 36)
    00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 36)
    00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 36)


    upon trying usermod -aG audio no change



    other things i have tried include 



    alsa force-reload


    .



    killall pulseaudio; rm -r ~/.config/pulse/* ; rm -r ~/.pulse*


    .



    amixer sset Master unmute
    amixer: Unable to find simple control 'Master',0


    any help would be appreciated




    linux audio antergos




    share|improve this question
























      up vote
      0
      down vote

      favorite









      up vote
      0
      down vote

      favorite











      so i recently installed antergos on my laptop and i get no sound out of my speakers or my headphones - hdmi out does not work either. i have tried going into alsa mixer and its not muted.



       $ inxi -xA
      Audio: Card-1 bytcht-es8316 driver: bytcht-es8316
       Card-2 Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
       Sound: Advanced Linux Sound Architecture v: k4.15.8-1-ARCH


      upon trying speaker-test -c2 i get this 



      speaker-test 1.1.5

      Playback device is default
      Stream parameters are 48000Hz, S16_LE, 2 channels
      Using 16 octaves of pink noise
      Rate set to 48000Hz (requested 48000Hz)
      Buffer size range from 16 to 204800
      Period size range from 8 to 102400
      Using max buffer size 204800
      Periods = 4
      Unable to set hw params for playback: Invalid argument
      Setting of hwparams failed: Invalid argument


      and trying pavucontrol just sits there establishing connection.



      trying lspci -nn | grep Audio gives me no output but lspci gives me this



       lspci
      00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 36)
      00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers (rev 36)
      00:03.0 Multimedia controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit (rev 36)
      00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 36)
      00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 36)
      00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 36)
      00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 36)


      upon trying usermod -aG audio no change



      other things i have tried include 



      alsa force-reload


      .



      killall pulseaudio; rm -r ~/.config/pulse/* ; rm -r ~/.pulse*


      .



      amixer sset Master unmute
      amixer: Unable to find simple control 'Master',0


      any help would be appreciated




      linux audio antergos




      share|improve this question














      so i recently installed antergos on my laptop and i get no sound out of my speakers or my headphones - hdmi out does not work either. i have tried going into alsa mixer and its not muted.



       $ inxi -xA
      Audio: Card-1 bytcht-es8316 driver: bytcht-es8316
       Card-2 Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
       Sound: Advanced Linux Sound Architecture v: k4.15.8-1-ARCH


      upon trying speaker-test -c2 i get this 



      speaker-test 1.1.5

      Playback device is default
      Stream parameters are 48000Hz, S16_LE, 2 channels
      Using 16 octaves of pink noise
      Rate set to 48000Hz (requested 48000Hz)
      Buffer size range from 16 to 204800
      Period size range from 8 to 102400
      Using max buffer size 204800
      Periods = 4
      Unable to set hw params for playback: Invalid argument
      Setting of hwparams failed: Invalid argument


      and trying pavucontrol just sits there establishing connection.



      trying lspci -nn | grep Audio gives me no output but lspci gives me this



       lspci
      00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 36)
      00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers (rev 36)
      00:03.0 Multimedia controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit (rev 36)
      00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 36)
      00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 36)
      00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 36)
      00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 36)


      upon trying usermod -aG audio no change



      other things i have tried include 



      alsa force-reload


      .



      killall pulseaudio; rm -r ~/.config/pulse/* ; rm -r ~/.pulse*


      .



      amixer sset Master unmute
      amixer: Unable to find simple control 'Master',0


      any help would be appreciated





      linux audio antergos





      share|improve this question













      share|improve this question




      share|improve this question








      edited Mar 14 at 15:15









      jasonwryan

      46.6k14127175




      46.6k14127175










      asked Mar 14 at 8:30









      james

      11




      11

























          active

          oldest

          votes











          Your Answer







          StackExchange.ready(function()
          var channelOptions =
          tags: "".split(" "),
          id: "106"
          ;
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function()
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled)
          StackExchange.using("snippets", function()
          createEditor();
          );

          else
          createEditor();

          );

          function createEditor()
          StackExchange.prepareEditor(
          heartbeatType: 'answer',
          convertImagesToLinks: false,
          noModals: false,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          );



          );








           

          draft saved


          draft discarded


















          StackExchange.ready(
          function ()
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f430119%2fno-sound-in-antergos%23new-answer', 'question_page');

          );

          Post as a guest






















          active

          oldest

          votes













          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes










           

          draft saved


          draft discarded


























           


          draft saved


          draft discarded














          StackExchange.ready(
          function ()
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f430119%2fno-sound-in-antergos%23new-answer', 'question_page');

          );

          Post as a guest
































































          -

          Popular posts from this blog

          How to check contact read email or not when send email to Individual?

          Image
          Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Se
          Read more

          Bahrain

          Image
          For other uses, see Bahrain (disambiguation). Sovereign island state in the Persian Gulf Kingdom of Bahrain مملكة البحرين   (Arabic) Mamlakat al-Baḥrayn Flag Coat of arms Anthem:  نشيد البحرين الوطني Bahrainona Our Bahrain Location of   Bahrain    (circled in red) Capital and largest city Manama 26°13′N 50°35′E  /  26.217°N 50.583°E  / 26.217; 50.583 Official languages Arabic Ethnic groups (2010 [1] ) 50.7% Arab (46% Bahrani, 4.7% other Arabs) 45.5% Asian 1% European 1.2% Others Religion Islam Demonym(s) Bahraini Government Unitary constitutional monarchy • King Hamad bin Isa Al Khalifa • Crown Prince Salman bin Hamad bin Isa Al Khalifa • Prime Minister Khalifa bin Salman Al Khalifa Legislature National Assembly • Upper house Consultative Council • Lower house Council of Representatives Independence • Declared Independence [2] 14 August 1971 • from United Kingdom [1] 15 August 1971 • Admitted to the United Nations 21 September 1971 • Kingdom of Bahrain 14 February 2002
          Read more

          Postfix configuration issue with fips on centos 7; mailgun relay

          Image
          Clash Royale CLAN TAG #URR8PPP up vote 0 down vote favorite I am trying to setup postfix to relay all mail generated on the local machine via SMTP to a mailgun relay. I have used the mailgun relay before with success on an ubuntu server, but I am migrating to a Centos 7 server which I will be running in FIPS mode. There error log is below, slightly sanitized. I have a small enough network that I choose to have each machine reach out to mailgun individually (this the loopback-only, 127.0.0.0/8 restrictions) and no firewall open port allowing smtp in to the machine. I assume the FIPS mode (and with it disabling of MD5) is causing problems, but I don't know how to overcome it or if it is even possible for tls_fprint to use some supported hash such as sha256 or sha512. However, the relay=none is slightly concerning since I have relayhost set, but perhaps that is because the smtp process is failing? Any help would be appreciated! postconf -n: alias_database = hash:/etc/alia
          Read more