Cannot find a valid baseurl for repo : base problem
Clash Royale CLAN TAG#URR8PPP
up vote
0
down vote
favorite
I am trying to update yum but with no success. I have tried all existed solution and i cannot fix it
This is the error I get
[root@localhost ]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
At first I did this but I got the same error
[root@localhost ]# ONBOOT=no
[root@localhost ]# dhclient
[root@localhost ]# yum update
Then I went to /etc/yum.repos.d/
vi CentOS-Base.repo
and then I removed # before the baseurl and save it by :x and enter
now I get the following error
[root@localhost yum.repos.d]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=extras&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=updates&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
One of the configured repositories failed (CentOS-7 - Base),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=base ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable base
or
subscription-manager repos --disable=base
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=base.skip_if_unavailable=true
failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
I did use the following command too but the error was the same
yum clean all && yum clean metadata && yum clean dbcache && yum makecache && yum update -y
To check for the interent I did the following
[
root@localhost ~]# cat /etc/resolv.conf
; generated by /usr/sbin/dhclient-script
search dhcp.swmed.org
nameserver 199.242.236.1
nameserver 199.242.237.1
then I ping the first one and I recieve the folliwng message
[root@localhost ~]# ping 199.242.236.1
PING 199.242.236.1 (199.242.236.1) 56(84) bytes of data.
64 bytes from 199.242.236.1: icmp_seq=1 ttl=61 time=0.262 ms
64 bytes from 199.242.236.1: icmp_seq=2 ttl=61 time=0.315 ms
64 bytes from 199.242.236.1: icmp_seq=3 ttl=61 time=0.299 ms
64 bytes from 199.242.236.1: icmp_seq=4 ttl=61 time=0.351 ms
/etc?yum.repos.d/CentOS-Base.repo
is as follows
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
centos networking curl repository
edited May 27 at 12:30
Jeff Schaller
31.1k846105
asked May 17 at 16:34
nik
1164
 |Â
show 7 more comments
up vote
0
down vote
favorite
I am trying to update yum but with no success. I have tried all existed solution and i cannot fix it
This is the error I get
[root@localhost ]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
At first I did this but I got the same error
[root@localhost ]# ONBOOT=no
[root@localhost ]# dhclient
[root@localhost ]# yum update
Then I went to /etc/yum.repos.d/
vi CentOS-Base.repo
and then I removed # before the baseurl and save it by :x and enter
now I get the following error
[root@localhost yum.repos.d]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=extras&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=updates&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
One of the configured repositories failed (CentOS-7 - Base),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=base ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable base
or
subscription-manager repos --disable=base
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=base.skip_if_unavailable=true
failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
I did use the following command too but the error was the same
yum clean all && yum clean metadata && yum clean dbcache && yum makecache && yum update -y
To check for the interent I did the following
[
root@localhost ~]# cat /etc/resolv.conf
; generated by /usr/sbin/dhclient-script
search dhcp.swmed.org
nameserver 199.242.236.1
nameserver 199.242.237.1
then I ping the first one and I recieve the folliwng message
[root@localhost ~]# ping 199.242.236.1
PING 199.242.236.1 (199.242.236.1) 56(84) bytes of data.
64 bytes from 199.242.236.1: icmp_seq=1 ttl=61 time=0.262 ms
64 bytes from 199.242.236.1: icmp_seq=2 ttl=61 time=0.315 ms
64 bytes from 199.242.236.1: icmp_seq=3 ttl=61 time=0.299 ms
64 bytes from 199.242.236.1: icmp_seq=4 ttl=61 time=0.351 ms
/etc?yum.repos.d/CentOS-Base.repo
is as follows
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
centos networking curl repository
edited May 27 at 12:30
Jeff Schaller
31.1k846105
asked May 17 at 16:34
nik
1164
Looks like "no Internet connection". Can you start e.g.firefoxOK ? ... The mirror list seems OK. ( I'm using one of those. Today it's mirror.netsite.dk/centos/7.5.1804/os/x86_64 ).
– Knud Larsen
May 17 at 16:57
@Knud Larsen I am using the same machine to write here. so i do have internet. Can you please tell me how to use the link you gave me?
– nik
May 17 at 17:01
The link is a mirror, like the mirrors in the mirrorlist link that you provided. If you put centos.ca-west.mirror.fullhost.io/centos/7.5.1804/os/x86_64 (which is the first mirror in the list you gave) and mirror.netsite.dk/centos/7.5.1804/os/x86_64 (the link Knud provided) in a browser, they both work, and the results are essentially the same. This shows the mirrors do appear to be working. DNS is also working (2607:f2d8:1:e::10), but for some reason your machine is unable to connect to it. Everything seems to be working up to the point of making the connection.
– trogdor
May 17 at 17:11
@trogdor my question is that where should I amend in order to use the link you provided? can you give me an idea how to update the yum ?
– nik
May 17 at 17:22
Can you include the [base] section of /etc/yum.repos.d/CentOS-Base.repo in your question
– trogdor
May 17 at 17:38
 |Â
show 7 more comments
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I am trying to update yum but with no success. I have tried all existed solution and i cannot fix it
This is the error I get
[root@localhost ]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
At first I did this but I got the same error
[root@localhost ]# ONBOOT=no
[root@localhost ]# dhclient
[root@localhost ]# yum update
Then I went to /etc/yum.repos.d/
vi CentOS-Base.repo
and then I removed # before the baseurl and save it by :x and enter
now I get the following error
[root@localhost yum.repos.d]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=extras&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=updates&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
One of the configured repositories failed (CentOS-7 - Base),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=base ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable base
or
subscription-manager repos --disable=base
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=base.skip_if_unavailable=true
failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
I did use the following command too but the error was the same
yum clean all && yum clean metadata && yum clean dbcache && yum makecache && yum update -y
To check for the interent I did the following
[
root@localhost ~]# cat /etc/resolv.conf
; generated by /usr/sbin/dhclient-script
search dhcp.swmed.org
nameserver 199.242.236.1
nameserver 199.242.237.1
then I ping the first one and I recieve the folliwng message
[root@localhost ~]# ping 199.242.236.1
PING 199.242.236.1 (199.242.236.1) 56(84) bytes of data.
64 bytes from 199.242.236.1: icmp_seq=1 ttl=61 time=0.262 ms
64 bytes from 199.242.236.1: icmp_seq=2 ttl=61 time=0.315 ms
64 bytes from 199.242.236.1: icmp_seq=3 ttl=61 time=0.299 ms
64 bytes from 199.242.236.1: icmp_seq=4 ttl=61 time=0.351 ms
/etc?yum.repos.d/CentOS-Base.repo
is as follows
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
centos networking curl repository
edited May 27 at 12:30
Jeff Schaller
31.1k846105
asked May 17 at 16:34
nik
1164
I am trying to update yum but with no success. I have tried all existed solution and i cannot fix it
This is the error I get
[root@localhost ]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
At first I did this but I got the same error
[root@localhost ]# ONBOOT=no
[root@localhost ]# dhclient
[root@localhost ]# yum update
Then I went to /etc/yum.repos.d/
vi CentOS-Base.repo
and then I removed # before the baseurl and save it by :x and enter
now I get the following error
[root@localhost yum.repos.d]# yum update
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=extras&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=updates&infra=stock error was
14: curl#7 - "Failed to connect to 2001:1b48:203::4:10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
Trying other mirror.
One of the configured repositories failed (CentOS-7 - Base),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=base ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable base
or
subscription-manager repos --disable=base
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=base.skip_if_unavailable=true
failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2607:f2d8:1:e::10: Network is unreachable"
I did use the following command too but the error was the same
yum clean all && yum clean metadata && yum clean dbcache && yum makecache && yum update -y
To check for the interent I did the following
[
root@localhost ~]# cat /etc/resolv.conf
; generated by /usr/sbin/dhclient-script
search dhcp.swmed.org
nameserver 199.242.236.1
nameserver 199.242.237.1
then I ping the first one and I recieve the folliwng message
[root@localhost ~]# ping 199.242.236.1
PING 199.242.236.1 (199.242.236.1) 56(84) bytes of data.
64 bytes from 199.242.236.1: icmp_seq=1 ttl=61 time=0.262 ms
64 bytes from 199.242.236.1: icmp_seq=2 ttl=61 time=0.315 ms
64 bytes from 199.242.236.1: icmp_seq=3 ttl=61 time=0.299 ms
64 bytes from 199.242.236.1: icmp_seq=4 ttl=61 time=0.351 ms
/etc?yum.repos.d/CentOS-Base.repo
is as follows
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
centos networking curl repository
edited May 27 at 12:30
Jeff Schaller
31.1k846105
asked May 17 at 16:34
nik
1164
edited May 27 at 12:30
Jeff Schaller
31.1k846105
edited May 27 at 12:30
Jeff Schaller
31.1k846105
edited May 27 at 12:30
Jeff Schaller
31.1k846105
31.1k846105
asked May 17 at 16:34
nik
1164
asked May 17 at 16:34
nik
1164
asked May 17 at 16:34
nik
1164
1164
Looks like "no Internet connection". Can you start e.g.firefoxOK ? ... The mirror list seems OK. ( I'm using one of those. Today it's mirror.netsite.dk/centos/7.5.1804/os/x86_64 ).
– Knud Larsen
May 17 at 16:57
@Knud Larsen I am using the same machine to write here. so i do have internet. Can you please tell me how to use the link you gave me?
– nik
May 17 at 17:01
The link is a mirror, like the mirrors in the mirrorlist link that you provided. If you put centos.ca-west.mirror.fullhost.io/centos/7.5.1804/os/x86_64 (which is the first mirror in the list you gave) and mirror.netsite.dk/centos/7.5.1804/os/x86_64 (the link Knud provided) in a browser, they both work, and the results are essentially the same. This shows the mirrors do appear to be working. DNS is also working (2607:f2d8:1:e::10), but for some reason your machine is unable to connect to it. Everything seems to be working up to the point of making the connection.
– trogdor
May 17 at 17:11
@trogdor my question is that where should I amend in order to use the link you provided? can you give me an idea how to update the yum ?
– nik
May 17 at 17:22
Can you include the [base] section of /etc/yum.repos.d/CentOS-Base.repo in your question
– trogdor
May 17 at 17:38
 |Â
show 7 more comments
Looks like "no Internet connection". Can you start e.g.firefoxOK ? ... The mirror list seems OK. ( I'm using one of those. Today it's mirror.netsite.dk/centos/7.5.1804/os/x86_64 ).
– Knud Larsen
May 17 at 16:57
@Knud Larsen I am using the same machine to write here. so i do have internet. Can you please tell me how to use the link you gave me?
– nik
May 17 at 17:01
The link is a mirror, like the mirrors in the mirrorlist link that you provided. If you put centos.ca-west.mirror.fullhost.io/centos/7.5.1804/os/x86_64 (which is the first mirror in the list you gave) and mirror.netsite.dk/centos/7.5.1804/os/x86_64 (the link Knud provided) in a browser, they both work, and the results are essentially the same. This shows the mirrors do appear to be working. DNS is also working (2607:f2d8:1:e::10), but for some reason your machine is unable to connect to it. Everything seems to be working up to the point of making the connection.
– trogdor
May 17 at 17:11
@trogdor my question is that where should I amend in order to use the link you provided? can you give me an idea how to update the yum ?
– nik
May 17 at 17:22
Can you include the [base] section of /etc/yum.repos.d/CentOS-Base.repo in your question
– trogdor
May 17 at 17:38
Looks like "no Internet connection". Can you start e.g.
firefox OK ? ... The mirror list seems OK. ( I'm using one of those. Today it's mirror.netsite.dk/centos/7.5.1804/os/x86_64 ).– Knud Larsen
May 17 at 16:57
Looks like "no Internet connection". Can you start e.g.
firefox OK ? ... The mirror list seems OK. ( I'm using one of those. Today it's mirror.netsite.dk/centos/7.5.1804/os/x86_64 ).– Knud Larsen
May 17 at 16:57
@Knud Larsen I am using the same machine to write here. so i do have internet. Can you please tell me how to use the link you gave me?
– nik
May 17 at 17:01
@Knud Larsen I am using the same machine to write here. so i do have internet. Can you please tell me how to use the link you gave me?
– nik
May 17 at 17:01
The link is a mirror, like the mirrors in the mirrorlist link that you provided. If you put centos.ca-west.mirror.fullhost.io/centos/7.5.1804/os/x86_64 (which is the first mirror in the list you gave) and mirror.netsite.dk/centos/7.5.1804/os/x86_64 (the link Knud provided) in a browser, they both work, and the results are essentially the same. This shows the mirrors do appear to be working. DNS is also working (2607:f2d8:1:e::10), but for some reason your machine is unable to connect to it. Everything seems to be working up to the point of making the connection.
– trogdor
May 17 at 17:11
The link is a mirror, like the mirrors in the mirrorlist link that you provided. If you put centos.ca-west.mirror.fullhost.io/centos/7.5.1804/os/x86_64 (which is the first mirror in the list you gave) and mirror.netsite.dk/centos/7.5.1804/os/x86_64 (the link Knud provided) in a browser, they both work, and the results are essentially the same. This shows the mirrors do appear to be working. DNS is also working (2607:f2d8:1:e::10), but for some reason your machine is unable to connect to it. Everything seems to be working up to the point of making the connection.
– trogdor
May 17 at 17:11
@trogdor my question is that where should I amend in order to use the link you provided? can you give me an idea how to update the yum ?
– nik
May 17 at 17:22
@trogdor my question is that where should I amend in order to use the link you provided? can you give me an idea how to update the yum ?
– nik
May 17 at 17:22
Can you include the [base] section of /etc/yum.repos.d/CentOS-Base.repo in your question
– trogdor
May 17 at 17:38
Can you include the [base] section of /etc/yum.repos.d/CentOS-Base.repo in your question
– trogdor
May 17 at 17:38
 |Â
show 7 more comments
1 Answer
1
active
oldest
votes
up vote
1
down vote
Set proxy information in the /etc/yum.conf, like this:
proxy=http://xxx.xxx.xxx.xxx:1087
proxy_username=
proxy_password=
edited May 17 at 20:14
Jeff Schaller
31.1k846105
answered May 17 at 19:04
nik
1164
add a comment |Â
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
Set proxy information in the /etc/yum.conf, like this:
proxy=http://xxx.xxx.xxx.xxx:1087
proxy_username=
proxy_password=
edited May 17 at 20:14
Jeff Schaller
31.1k846105
answered May 17 at 19:04
nik
1164
add a comment |Â
up vote
1
down vote
Set proxy information in the /etc/yum.conf, like this:
proxy=http://xxx.xxx.xxx.xxx:1087
proxy_username=
proxy_password=
edited May 17 at 20:14
Jeff Schaller
31.1k846105
answered May 17 at 19:04
nik
1164
add a comment |Â
up vote
1
down vote
up vote
1
down vote
Set proxy information in the /etc/yum.conf, like this:
proxy=http://xxx.xxx.xxx.xxx:1087
proxy_username=
proxy_password=
edited May 17 at 20:14
Jeff Schaller
31.1k846105
answered May 17 at 19:04
nik
1164
Set proxy information in the /etc/yum.conf, like this:
proxy=http://xxx.xxx.xxx.xxx:1087
proxy_username=
proxy_password=
edited May 17 at 20:14
Jeff Schaller
31.1k846105
answered May 17 at 19:04
nik
1164
edited May 17 at 20:14
Jeff Schaller
31.1k846105
edited May 17 at 20:14
Jeff Schaller
31.1k846105
edited May 17 at 20:14
Jeff Schaller
31.1k846105
31.1k846105
answered May 17 at 19:04
nik
1164
answered May 17 at 19:04
nik
1164
answered May 17 at 19:04
nik
1164
1164
add a comment |Â
add a comment |Â
Â
draft saved
draft discarded
Â
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f444424%2fcannot-find-a-valid-baseurl-for-repo-base-problem%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Looks like "no Internet connection". Can you start e.g.
firefoxOK ? ... The mirror list seems OK. ( I'm using one of those. Today it's mirror.netsite.dk/centos/7.5.1804/os/x86_64 ).– Knud Larsen
May 17 at 16:57
@Knud Larsen I am using the same machine to write here. so i do have internet. Can you please tell me how to use the link you gave me?
– nik
May 17 at 17:01
The link is a mirror, like the mirrors in the mirrorlist link that you provided. If you put centos.ca-west.mirror.fullhost.io/centos/7.5.1804/os/x86_64 (which is the first mirror in the list you gave) and mirror.netsite.dk/centos/7.5.1804/os/x86_64 (the link Knud provided) in a browser, they both work, and the results are essentially the same. This shows the mirrors do appear to be working. DNS is also working (2607:f2d8:1:e::10), but for some reason your machine is unable to connect to it. Everything seems to be working up to the point of making the connection.
– trogdor
May 17 at 17:11
@trogdor my question is that where should I amend in order to use the link you provided? can you give me an idea how to update the yum ?
– nik
May 17 at 17:22
Can you include the [base] section of /etc/yum.repos.d/CentOS-Base.repo in your question
– trogdor
May 17 at 17:38