Yate railway station



Railway station near Bristol, England







































Yate National Rail

Yate railway station MMB 07 150279.jpg
150279 arrives at the Bristol side of the station.

Location
PlaceYate
Local authoritySouth Gloucestershire
Coordinates
51°32′28″N 2°25′55″W / 51.5411°N 2.4319°W / 51.5411; -2.4319Coordinates: 51°32′28″N 2°25′55″W / 51.5411°N 2.4319°W / 51.5411; -2.4319
Grid referenceST701826
Operations
Station codeYAE
Managed byGreat Western Railway
Number of platforms2
DfT categoryF1
Live arrivals/departures, station information and onward connections
from National Rail Enquiries
Annual rail passenger usage*
2013/14
Increase 0.329 million
2014/15
Increase 0.354 million
2015/16
Increase 0.369 million
2016/17
Increase 0.393 million
2017/18
Decrease 0.385 million
History
Original companyBristol and Gloucester Railway
Pre-groupingMidland Railway
Post-groupingLMS
1844Opened
1965Closed
1989Reopened

National Rail – UK railway stations
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
* Annual estimated passenger usage based on sales of tickets in stated financial year(s) which end or originate at Yate from Office of Rail and Road statistics. Methodology may vary year on year.

170433 at Edinburgh Waverley.JPG UK Railways portal

Yate railway station serves the town of Yate in South Gloucestershire, in south west England. The station is located on the main Bristol to Birmingham line between Bristol Parkway and Cam & Dursley, and is operated by Great Western Railway.


The station is staffed on weekday mornings.[1] It has two staggered platforms, separated by the A432 road bridge. An automated ticket machine was installed in mid-2007, but stopped functioning due to vandalism and is reported to be "unlikely to be replaced in the foreseeable future".[2] A new ticket machine was installed in 2013 on platform 1, whilst the portakabin ticket office is on the opposite platform. Digital information screens, customer help points and timetable posters provide train running information, whilst CCTV was installed here in 2011.[3] Step-free access to both platforms is available (via ramps from the road bridge to platform 1).




Contents





  • 1 History


  • 2 Services


  • 3 References


  • 4 External links




History




A 1909 Railway Clearing House map of railways in the vicinity of Yate


.mw-parser-output .RMboxbox-shadow:0 2px 2px 0 rgba(0,0,0,.14),0 1px 5px 0 rgba(0,0,0,.12),0 3px 1px -2px rgba(0,0,0,.2).mw-parser-output .RMinlinefloat:none;width:100%;margin:0;border:none.mw-parser-output table.routemappadding:0;border:0;border-spacing:0;background:transparent;white-space:nowrap;line-height:1.2;margin:auto.mw-parser-output .RMirborder:0;border-spacing:0;display:table;line-height:0;padding:0!important;margin:0 auto!important.mw-parser-output table.routemap .RMsidisplay:inline;font-size:90%.mw-parser-output table.routemap .RMl1padding:0 3px;text-align:left.mw-parser-output table.routemap .RMr1padding:0 3px;text-align:right.mw-parser-output table.routemap .RMltext-align:right.mw-parser-output table.routemap .RMrtext-align:left.mw-parser-output table.routemap .RMl4padding:0 3px 0 0;text-align:left.mw-parser-output table.routemap .RMr4padding:0 0 0 3px;text-align:right.mw-parser-output table.routemap>tbody>trline-height:1.mw-parser-output table.routemap>tbody>tr>tdpadding:0;width:auto;vertical-align:middle;text-align:center.mw-parser-output .RMir>tbody>trdisplay:inline-table.mw-parser-output .RMir>tbody>tr>tdpadding:0;height:20px;min-height:20px.mw-parser-output .RMir .RMovposition:relative.mw-parser-output .RMir .RMicposition:absolute;left:0px;top:0px;padding:0.mw-parser-output .RMir .RMtxline-height:20px;vertical-align:middle;text-align:center.mw-parser-output .RMir .RMspheight:20px;min-height:20px.mw-parser-output .RMir div>.RMtxposition:absolute.mw-parser-output .RMir .RMtx>abbr,.mw-parser-output .RMir .RMtx>divline-height:.975;display:inline-block;vertical-align:middle.mw-parser-output .RMir .RMf_height:5px;min-height:5px;width:20px;min-width:20px.mw-parser-output .RMir .RMfmheight:100%;min-height:100%;width:4px;min-width:4px;margin:0 auto.mw-parser-output .RMir .RMowidth:2.5px;min-width:2.5px.mw-parser-output .RMir .RMcwidth:5px;min-width:5px.mw-parser-output .RMir .RMocwidth:7.5px;min-width:7.5px.mw-parser-output .RMir .RMdwidth:10px;min-width:10px.mw-parser-output .RMir .RModwidth:12.5px;min-width:12.5px.mw-parser-output .RMir .RMcdwidth:15px;min-width:15px.mw-parser-output .RMir .RMocdwidth:17.5px;min-width:17.5px.mw-parser-output .RMir .RM_width:20px;min-width:20px.mw-parser-output .RMir .RM_owidth:22.5px;min-width:22.5px.mw-parser-output .RMir .RM_cwidth:25px;min-width:25px.mw-parser-output .RMir .RM_ocwidth:27.5px;min-width:27.5px.mw-parser-output .RMir .RM_dwidth:30px;min-width:30px.mw-parser-output .RMir .RM_odwidth:32.5px;min-width:32.5px.mw-parser-output .RMir .RM_cdwidth:35px;min-width:35px.mw-parser-output .RMir .RM_ocdwidth:37.5px;min-width:37.5px.mw-parser-output .RMir .RMbwidth:40px;min-width:40px.mw-parser-output .RMir .RMcbwidth:45px;min-width:45px.mw-parser-output .RMir .RMdbwidth:50px;min-width:50px.mw-parser-output .RMir .RMcdbwidth:55px;min-width:55px.mw-parser-output .RMir .RM_bwidth:60px;min-width:60px.mw-parser-output .RMir .RM_cbwidth:65px;min-width:65px.mw-parser-output .RMir .RM_dbwidth:70px;min-width:70px.mw-parser-output .RMir .RM_cdbwidth:75px;min-width:75px.mw-parser-output .RMir .RMswidth:80px;min-width:80px.mw-parser-output .RMir .RMdswidth:90px;min-width:90px.mw-parser-output .RMir .RM_swidth:100px;min-width:100px.mw-parser-output .RMir .RM_dswidth:110px;min-width:110px.mw-parser-output .RMir .RMbswidth:120px;min-width:120px.mw-parser-output .RMir .RMdbswidth:130px;min-width:130px.mw-parser-output .RMir .RM_bswidth:140px;min-width:140px.mw-parser-output .RMir .RM_dbswidth:150px;min-width:150px.mw-parser-output .RMir .RMwwidth:160px;min-width:160px.mw-parser-output .RMir .RM_wwidth:180px;min-width:180px.mw-parser-output .RMir .RMbwwidth:200px;min-width:200px.mw-parser-output .RMir .RM_bwwidth:220px;min-width:220px.mw-parser-output .RMir .RMswwidth:240px;min-width:240px.mw-parser-output .RMir .RM_swwidth:260px;min-width:260px.mw-parser-output .RMir .RMbswwidth:280px;min-width:280px.mw-parser-output .RMir .RM_bswwidth:300px;min-width:300px

The Yate station first opened on 8 July 1844 and closed in January 1965, along with other wayside stations on the former Bristol and Gloucester Railway; the local stopping service on the route having been withdrawn as a result of the Beeching Axe.[4][5] This had both its platforms on the southern side of the road bridge mentioned above - the original 1844 goods shed still stands (now in commercial use) next to the old southbound platform site.[6] The station was reopened by British Rail on 11 May 1989 with the backing of Avon County Council.


When first open, trains headed south along the original B&GR/Midland route via Fishponds to reach Bristol, although a connection was subsequently laid in to link this route with the rival Great Western Railway's 1903 "Badminton Line" from Wootton Bassett to Patchway (the current South Wales Main Line) in 1908. The new connection left the older line by means a flying junction at Yate South[7] before heading southwest to join the SWML at the triangular Westerleigh Junction. Though jointly built by the two companies for the purpose of giving the GWR access to the Severn Rail Bridge and Severn and Wye Railway, it also provided an alternative route to Bristol Temple Meads via Filton and the Great Western soon made use of it to compete with the Midland for Bristol to Birmingham traffic, much to the dismay of the latter company. All services now use this newer line to get to Bristol, as the original 1844 route through Mangotsfield was abandoned in January 1970 following the completion of the Bristol area resignalling scheme. A short section of the old route was retained from Yate South Junction after the rest closed, to serve a domestic waste transfer depot and fuel oil distribution terminal at Westerleigh sidings.[8] This line is still in use today.


It is the junction station for the Thornbury Branchline, however the passenger stations on this branch have long since closed (trains ceased in 1944) and the line remained open to serve Tytherington Quarry until September 2013, when it was placed 'Out of Use' by Network Rail following the mothballing of the quarry at the beginning of the year.[9][10][11] The line has now (summer 2017) returned to use following the reopening of the quarry, with Mendip Rail running periodic stone trains.


In the Strategic Rail Authority’s 2007/08 financial year, Yate was ranked as the 1104th most-used station in the UK.



Services


The station is served Monday to Saturday by a train every hour in both directions between Gloucester and Westbury via Bristol Temple Meads (with two-hourly extensions to/from Worcester & Great Malvern northbound and to/from Weymouth southbound, plus a single service to/from Brighton).[12] There have been proposals put forward to run additional services to/from Bristol as part of the second phase of the Greater Bristol Metro plans first put forward in 2008 and rebranded as "MetroWest" in 2013.[13] If implemented the station would become the new northern terminus of the current Weston-super-Mare to Bristol Parkway local service, though this would not happen until after Phase 1 of the scheme is completed in 2019.


Yate station is also served by a two-hourly Sunday service. A normal service operates on most bank holidays.























Preceding station

National Rail National Rail
Following station

Bristol Parkway
 

Great Western Railway
Gloucester - Westbury
 

Cam & Dursley

Disused railways


Mangotsfield
Line and station closed
 

Bristol and Gloucester Railway
Midland Railway
 

Wickwar
Station closed

Terminus
 

Thornbury Branch Line
Midland Railway
 

Iron Acton
Station closed


References




  1. ^ National Rail Enquiries - Yate


  2. ^ Yate Station User Group


  3. ^ "CCTV to deter Yate station vandalism" BBC News article 1 March 2011; Retrieved 10 April 2017


  4. ^ The Victoria County History of Gloucestershire, Volume 14, Yate: Settlement (draft), p.10 Victoria County History.ac.uk; Retrieved 2013-12-13


  5. ^ British Railways Board - The Reshaping of British Railways, Part 1 Report (HMSO) 1963, p.121The Railways Archive; Retrieved 2013-12-13


  6. ^ "Viewfinder - Goods shed, Yate Railway Station, Station Road, Yate, Avon"English Heritage; Retrieved 2013-12-12


  7. ^ Yate South Junction signalling diagramSignalling Record Society; Retrieved 2013-12-12


  8. ^ Railscot - Westerleigh North Junction www.railbrit.co.uk; Retrieved 2013-12-13


  9. ^ "Establishment of proposed G1 Short Term Network Change: Tytherington Branch (from 0m 30ch) Designation as "Out of Use (temporary)"" (PDF). Swindon: Network Rail. 10 September 2013. STNC/G1/2013/WEST/565. Retrieved 3 November 2013..mw-parser-output cite.citationfont-style:inherit.mw-parser-output .citation qquotes:"""""""'""'".mw-parser-output .citation .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .citation .cs1-lock-limited a,.mw-parser-output .citation .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .citation .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-ws-icon abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/4/4c/Wikisource-logo.svg/12px-Wikisource-logo.svg.png")no-repeat;background-position:right .1em center.mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-maintdisplay:none;color:#33aa33;margin-left:0.3em.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em


  10. ^ "Calls to Restore Railway Line Following Quarry Closure" Souvebois, Marion,Gloucestershire Gazette news article 2-01-2013; Retrieved 2013-12-12


  11. ^ "New Lease of Life Planned For Tracks Behind Thornbury Quarry" Gardner, Rachel Bristol Post article 5-01-2013; Retrieved 2013-12-12


  12. ^ Table 123 National Rail timetable, December 2016


  13. ^ MetroWest Phase 2MetroWest Briefing Note, June 2013, Travelwest.info; Retrieved 2013-12-13




External links


  • Friends of Yate Station site

  • Yate Heritage Centre's page "Victorians and Yate's Railway"





-

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Read more