Vojany Power Station

Multi tool use
Multi tool use





























Vojany Power Station
A Vajáni hőerőmű.jpg


Vojany Power Station is located in Slovakia
Vojany Power Station


Location of the Vojany Power Station in Slovakia

Official nameElektráreň Vojany
CountrySlovakia
LocationVojany
Coordinates48°33′13″N 21°58′41″E / 48.55361°N 21.97806°E / 48.55361; 21.97806Coordinates: 48°33′13″N 21°58′41″E / 48.55361°N 21.97806°E / 48.55361; 21.97806
StatusOperational
Construction began1961
Commission date1966
Owner(s)Slovenské elektrárne
Thermal power station
Primary fuelCoal
Secondary fuelNatural gas
Tertiary fuelFuel oil
Power generation
Units operational12 x 110 MW
Make and modelŠkoda
Nameplate capacity1,320 MW

Vojany Power Station is a thermal power station at Vojany, Slovakia. It consists of 12 units, with 110 MW generation capacity each. Planning of the first plant began in 1959, the project was approved in 1960, and construction began in 1961. It was commissioned in 1966. The second plant was approved in 1966, construction started in 1968, and it was commissioned in 1973–1974.[1][2]


The first plant was designed to use semi-anthracite coal imported from Ukraine by a purpose built wide-gauge rail line. Cooling water is supplied from the Zemplínska Šírava reservoir.[1][2] Its flue gas stack is 200 metres (656 ft) tall.


The second plant uses heavy fuel oil. Between 1979 and 1985 it was modernized to use also natural gas.[2] Its flue gas stack, which was completed in 1974, was originally 300 metres (984 ft) tall. In 1998, its height was reduced to 175 metres (574 ft).[3]



References




  1. ^ ab
    "Coal- and Lignite-Fired in Central Europe". industcards.com. Retrieved 2011-02-12..mw-parser-output cite.citationfont-style:inherit.mw-parser-output .citation qquotes:"""""""'""'".mw-parser-output .citation .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .citation .cs1-lock-limited a,.mw-parser-output .citation .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .citation .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-ws-icon abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/4/4c/Wikisource-logo.svg/12px-Wikisource-logo.svg.png")no-repeat;background-position:right .1em center.mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-maintdisplay:none;color:#33aa33;margin-left:0.3em.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em


  2. ^ abc
    "History". Slovenské elektrárne. Retrieved 2011-02-12.


  3. ^ [1]










yAcqC1e,YNg1 aqirz96sGPMT6L,y2G,Au1KcoHt,vJJ9XeSRrC Sm
-
CVfLPFLnu6yBo,j1,7I70o1B5rujv3 9 oRM 9GVLCV,aeafRMVOUsNucEmIjgjySft,fitZsRG,RSh vXOk,jV RkrVaFG111S,7d8,fbbCFs

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
Read more