Identify unknown SMD component code A6530 72130
Clash Royale CLAN TAG#URR8PPP
$begingroup$
I have a TTL to RS485 driver board and I am try identify one of the manufacturer part number from the board.
Can anyone identify the SMD Code and manufacturer part number of the following device?
Code A6530 72130
dimension is 6.6mm x 4mm
surface-mount code
asked Jan 7 at 7:55
Chii LokChii Lok
364
$endgroup$
add a comment |
$begingroup$
I have a TTL to RS485 driver board and I am try identify one of the manufacturer part number from the board.
Can anyone identify the SMD Code and manufacturer part number of the following device?
Code A6530 72130
dimension is 6.6mm x 4mm
surface-mount code
asked Jan 7 at 7:55
Chii LokChii Lok
364
$endgroup$
$begingroup$
That's weird. The package looks derived from current technology for ICs but the reference designator F1 hints at a fuse or maybe a filter. Also it looks like maybe it was soldered wrong, shifted one pad out of position, though given that the PCB seems to have one larger area rather than match the package pads that may not matter. What is your goal in identifying it?
$endgroup$
– Chris Stratton
Jan 7 at 8:19
$begingroup$
That's true, it is confusing. I am trying to get schematic out of it. Try to get overall cost of making it.
$endgroup$
– Chii Lok
Jan 8 at 1:30
add a comment |
$begingroup$
I have a TTL to RS485 driver board and I am try identify one of the manufacturer part number from the board.
Can anyone identify the SMD Code and manufacturer part number of the following device?
Code A6530 72130
dimension is 6.6mm x 4mm
surface-mount code
asked Jan 7 at 7:55
Chii LokChii Lok
364
$endgroup$
I have a TTL to RS485 driver board and I am try identify one of the manufacturer part number from the board.
Can anyone identify the SMD Code and manufacturer part number of the following device?
Code A6530 72130
dimension is 6.6mm x 4mm
surface-mount code
surface-mount code
asked Jan 7 at 7:55
Chii LokChii Lok
364
asked Jan 7 at 7:55
Chii LokChii Lok
364
asked Jan 7 at 7:55
Chii LokChii Lok
364
asked Jan 7 at 7:55
Chii LokChii Lok
364
asked Jan 7 at 7:55
Chii LokChii Lok
364
364
$begingroup$
That's weird. The package looks derived from current technology for ICs but the reference designator F1 hints at a fuse or maybe a filter. Also it looks like maybe it was soldered wrong, shifted one pad out of position, though given that the PCB seems to have one larger area rather than match the package pads that may not matter. What is your goal in identifying it?
$endgroup$
– Chris Stratton
Jan 7 at 8:19
$begingroup$
That's true, it is confusing. I am trying to get schematic out of it. Try to get overall cost of making it.
$endgroup$
– Chii Lok
Jan 8 at 1:30
add a comment |
$begingroup$
That's weird. The package looks derived from current technology for ICs but the reference designator F1 hints at a fuse or maybe a filter. Also it looks like maybe it was soldered wrong, shifted one pad out of position, though given that the PCB seems to have one larger area rather than match the package pads that may not matter. What is your goal in identifying it?
$endgroup$
– Chris Stratton
Jan 7 at 8:19
$begingroup$
That's true, it is confusing. I am trying to get schematic out of it. Try to get overall cost of making it.
$endgroup$
– Chii Lok
Jan 8 at 1:30
$begingroup$
That's weird. The package looks derived from current technology for ICs but the reference designator F1 hints at a fuse or maybe a filter. Also it looks like maybe it was soldered wrong, shifted one pad out of position, though given that the PCB seems to have one larger area rather than match the package pads that may not matter. What is your goal in identifying it?
$endgroup$
– Chris Stratton
Jan 7 at 8:19
$begingroup$
That's weird. The package looks derived from current technology for ICs but the reference designator F1 hints at a fuse or maybe a filter. Also it looks like maybe it was soldered wrong, shifted one pad out of position, though given that the PCB seems to have one larger area rather than match the package pads that may not matter. What is your goal in identifying it?
$endgroup$
– Chris Stratton
Jan 7 at 8:19
$begingroup$
That's true, it is confusing. I am trying to get schematic out of it. Try to get overall cost of making it.
$endgroup$
– Chii Lok
Jan 8 at 1:30
$begingroup$
That's true, it is confusing. I am trying to get schematic out of it. Try to get overall cost of making it.
$endgroup$
– Chii Lok
Jan 8 at 1:30
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
"F1" indicates some kind of fuse, and that "B" is the Bourns logo. Googling "Bourns A6530" leads to the TBU-CA datasheet, which says:
The TBU-CA Series of Bourns® TBU®
products are low capacitance single
bidirectional high-speed protection
components, constructed using MOSFET
semiconductor technology, and designed
to protect against faults caused by short
circuits, AC power cross, induction and lightning surges.
[…]
answered Jan 7 at 8:19
CL.CL.
9,68332445
$endgroup$
4
$begingroup$
Great job! But it would be good to get a brief description into the body of your answer so as not to rely on the link. The fact that it is MOSFET based makes its physical resemblance to an IC package a little less surprising.
$endgroup$
– Chris Stratton
Jan 7 at 8:21
1
$begingroup$
Looking at how you could determine the company name based on the logo, is there a list somewhere on the internet which lists common IC logos found in the wild?
$endgroup$
– Tejas Kale
Jan 7 at 18:07
1
$begingroup$
@TejasKale google.com/search?q=ic+logo+list But I didn't use a list, or knew that "B"; I just guessed that this chip didn't look like a cheap Chinese jellybean part, and the first big fuse manufacturer with a name beginning with "B" that came to mind was Bourns.
$endgroup$
– CL.
Jan 7 at 21:34
$begingroup$
Thanks you @CL. Your answer helps a lot.
$endgroup$
– Chii Lok
Jan 8 at 1:44
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
return StackExchange.using("mathjaxEditing", function ()
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
);
);
, "mathjax-editing");
StackExchange.ifUsing("editor", function ()
return StackExchange.using("schematics", function ()
StackExchange.schematics.init();
);
, "cicuitlab");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "135"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f415667%2fidentify-unknown-smd-component-code-a6530-72130%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
"F1" indicates some kind of fuse, and that "B" is the Bourns logo. Googling "Bourns A6530" leads to the TBU-CA datasheet, which says:
The TBU-CA Series of Bourns® TBU®
products are low capacitance single
bidirectional high-speed protection
components, constructed using MOSFET
semiconductor technology, and designed
to protect against faults caused by short
circuits, AC power cross, induction and lightning surges.
[…]
answered Jan 7 at 8:19
CL.CL.
9,68332445
$endgroup$
4
$begingroup$
Great job! But it would be good to get a brief description into the body of your answer so as not to rely on the link. The fact that it is MOSFET based makes its physical resemblance to an IC package a little less surprising.
$endgroup$
– Chris Stratton
Jan 7 at 8:21
1
$begingroup$
Looking at how you could determine the company name based on the logo, is there a list somewhere on the internet which lists common IC logos found in the wild?
$endgroup$
– Tejas Kale
Jan 7 at 18:07
1
$begingroup$
@TejasKale google.com/search?q=ic+logo+list But I didn't use a list, or knew that "B"; I just guessed that this chip didn't look like a cheap Chinese jellybean part, and the first big fuse manufacturer with a name beginning with "B" that came to mind was Bourns.
$endgroup$
– CL.
Jan 7 at 21:34
$begingroup$
Thanks you @CL. Your answer helps a lot.
$endgroup$
– Chii Lok
Jan 8 at 1:44
add a comment |
$begingroup$
"F1" indicates some kind of fuse, and that "B" is the Bourns logo. Googling "Bourns A6530" leads to the TBU-CA datasheet, which says:
The TBU-CA Series of Bourns® TBU®
products are low capacitance single
bidirectional high-speed protection
components, constructed using MOSFET
semiconductor technology, and designed
to protect against faults caused by short
circuits, AC power cross, induction and lightning surges.
[…]
answered Jan 7 at 8:19
CL.CL.
9,68332445
$endgroup$
4
$begingroup$
Great job! But it would be good to get a brief description into the body of your answer so as not to rely on the link. The fact that it is MOSFET based makes its physical resemblance to an IC package a little less surprising.
$endgroup$
– Chris Stratton
Jan 7 at 8:21
1
$begingroup$
Looking at how you could determine the company name based on the logo, is there a list somewhere on the internet which lists common IC logos found in the wild?
$endgroup$
– Tejas Kale
Jan 7 at 18:07
1
$begingroup$
@TejasKale google.com/search?q=ic+logo+list But I didn't use a list, or knew that "B"; I just guessed that this chip didn't look like a cheap Chinese jellybean part, and the first big fuse manufacturer with a name beginning with "B" that came to mind was Bourns.
$endgroup$
– CL.
Jan 7 at 21:34
$begingroup$
Thanks you @CL. Your answer helps a lot.
$endgroup$
– Chii Lok
Jan 8 at 1:44
add a comment |
$begingroup$
"F1" indicates some kind of fuse, and that "B" is the Bourns logo. Googling "Bourns A6530" leads to the TBU-CA datasheet, which says:
The TBU-CA Series of Bourns® TBU®
products are low capacitance single
bidirectional high-speed protection
components, constructed using MOSFET
semiconductor technology, and designed
to protect against faults caused by short
circuits, AC power cross, induction and lightning surges.
[…]
answered Jan 7 at 8:19
CL.CL.
9,68332445
$endgroup$
"F1" indicates some kind of fuse, and that "B" is the Bourns logo. Googling "Bourns A6530" leads to the TBU-CA datasheet, which says:
The TBU-CA Series of Bourns® TBU®
products are low capacitance single
bidirectional high-speed protection
components, constructed using MOSFET
semiconductor technology, and designed
to protect against faults caused by short
circuits, AC power cross, induction and lightning surges.
[…]
answered Jan 7 at 8:19
CL.CL.
9,68332445
edited Jan 7 at 8:28
answered Jan 7 at 8:19
CL.CL.
9,68332445
answered Jan 7 at 8:19
CL.CL.
9,68332445
answered Jan 7 at 8:19
CL.CL.
9,68332445
9,68332445
4
$begingroup$
Great job! But it would be good to get a brief description into the body of your answer so as not to rely on the link. The fact that it is MOSFET based makes its physical resemblance to an IC package a little less surprising.
$endgroup$
– Chris Stratton
Jan 7 at 8:21
1
$begingroup$
Looking at how you could determine the company name based on the logo, is there a list somewhere on the internet which lists common IC logos found in the wild?
$endgroup$
– Tejas Kale
Jan 7 at 18:07
1
$begingroup$
@TejasKale google.com/search?q=ic+logo+list But I didn't use a list, or knew that "B"; I just guessed that this chip didn't look like a cheap Chinese jellybean part, and the first big fuse manufacturer with a name beginning with "B" that came to mind was Bourns.
$endgroup$
– CL.
Jan 7 at 21:34
$begingroup$
Thanks you @CL. Your answer helps a lot.
$endgroup$
– Chii Lok
Jan 8 at 1:44
add a comment |
4
$begingroup$
Great job! But it would be good to get a brief description into the body of your answer so as not to rely on the link. The fact that it is MOSFET based makes its physical resemblance to an IC package a little less surprising.
$endgroup$
– Chris Stratton
Jan 7 at 8:21
1
$begingroup$
Looking at how you could determine the company name based on the logo, is there a list somewhere on the internet which lists common IC logos found in the wild?
$endgroup$
– Tejas Kale
Jan 7 at 18:07
1
$begingroup$
@TejasKale google.com/search?q=ic+logo+list But I didn't use a list, or knew that "B"; I just guessed that this chip didn't look like a cheap Chinese jellybean part, and the first big fuse manufacturer with a name beginning with "B" that came to mind was Bourns.
$endgroup$
– CL.
Jan 7 at 21:34
$begingroup$
Thanks you @CL. Your answer helps a lot.
$endgroup$
– Chii Lok
Jan 8 at 1:44
4
4
$begingroup$
Great job! But it would be good to get a brief description into the body of your answer so as not to rely on the link. The fact that it is MOSFET based makes its physical resemblance to an IC package a little less surprising.
$endgroup$
– Chris Stratton
Jan 7 at 8:21
$begingroup$
Great job! But it would be good to get a brief description into the body of your answer so as not to rely on the link. The fact that it is MOSFET based makes its physical resemblance to an IC package a little less surprising.
$endgroup$
– Chris Stratton
Jan 7 at 8:21
1
1
$begingroup$
Looking at how you could determine the company name based on the logo, is there a list somewhere on the internet which lists common IC logos found in the wild?
$endgroup$
– Tejas Kale
Jan 7 at 18:07
$begingroup$
Looking at how you could determine the company name based on the logo, is there a list somewhere on the internet which lists common IC logos found in the wild?
$endgroup$
– Tejas Kale
Jan 7 at 18:07
1
1
$begingroup$
@TejasKale google.com/search?q=ic+logo+list But I didn't use a list, or knew that "B"; I just guessed that this chip didn't look like a cheap Chinese jellybean part, and the first big fuse manufacturer with a name beginning with "B" that came to mind was Bourns.
$endgroup$
– CL.
Jan 7 at 21:34
$begingroup$
@TejasKale google.com/search?q=ic+logo+list But I didn't use a list, or knew that "B"; I just guessed that this chip didn't look like a cheap Chinese jellybean part, and the first big fuse manufacturer with a name beginning with "B" that came to mind was Bourns.
$endgroup$
– CL.
Jan 7 at 21:34
$begingroup$
Thanks you @CL. Your answer helps a lot.
$endgroup$
– Chii Lok
Jan 8 at 1:44
$begingroup$
Thanks you @CL. Your answer helps a lot.
$endgroup$
– Chii Lok
Jan 8 at 1:44
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f415667%2fidentify-unknown-smd-component-code-a6530-72130%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
That's weird. The package looks derived from current technology for ICs but the reference designator F1 hints at a fuse or maybe a filter. Also it looks like maybe it was soldered wrong, shifted one pad out of position, though given that the PCB seems to have one larger area rather than match the package pads that may not matter. What is your goal in identifying it?
$endgroup$
– Chris Stratton
Jan 7 at 8:19
$begingroup$
That's true, it is confusing. I am trying to get schematic out of it. Try to get overall cost of making it.
$endgroup$
– Chii Lok
Jan 8 at 1:30