How can I assemble 2 opposing gears so that the axle rotations are perfectly parallel?
Clash Royale CLAN TAG#URR8PPP
Due to the way all the modern LEGO gears are perfectly quarter-turn symmetrical, there doesn't appear to be any way to assembly 2 opposing gears such that I get a 2 perfectly parallel axles.
This image illustrates the problem:
When one gear it perfectly centered, the other gear is rotated half a tooth.
How can I get 2 opposing gear's axles to be perfectly parallel? Are there any older or special gears that are useful here? Otherwise, are there any good workarounds?
technic building gears
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
add a comment |
Due to the way all the modern LEGO gears are perfectly quarter-turn symmetrical, there doesn't appear to be any way to assembly 2 opposing gears such that I get a 2 perfectly parallel axles.
This image illustrates the problem:
When one gear it perfectly centered, the other gear is rotated half a tooth.
How can I get 2 opposing gear's axles to be perfectly parallel? Are there any older or special gears that are useful here? Otherwise, are there any good workarounds?
technic building gears
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
1
Do you have any restrictions on the maximum distance of the gears or similar?
– Wrzlprmft
Dec 22 '18 at 7:05
@Wrzlprmft No necessarily, just that they turn in opposite directions.
– Alexander O'Mara
Dec 22 '18 at 7:06
add a comment |
Due to the way all the modern LEGO gears are perfectly quarter-turn symmetrical, there doesn't appear to be any way to assembly 2 opposing gears such that I get a 2 perfectly parallel axles.
This image illustrates the problem:
When one gear it perfectly centered, the other gear is rotated half a tooth.
How can I get 2 opposing gear's axles to be perfectly parallel? Are there any older or special gears that are useful here? Otherwise, are there any good workarounds?
technic building gears
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
Due to the way all the modern LEGO gears are perfectly quarter-turn symmetrical, there doesn't appear to be any way to assembly 2 opposing gears such that I get a 2 perfectly parallel axles.
This image illustrates the problem:
When one gear it perfectly centered, the other gear is rotated half a tooth.
How can I get 2 opposing gear's axles to be perfectly parallel? Are there any older or special gears that are useful here? Otherwise, are there any good workarounds?
technic building gears
technic building gears
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
edited Dec 22 '18 at 7:01
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
asked Dec 22 '18 at 6:10
Alexander O'Mara
7,22521547
7,22521547
1
Do you have any restrictions on the maximum distance of the gears or similar?
– Wrzlprmft
Dec 22 '18 at 7:05
@Wrzlprmft No necessarily, just that they turn in opposite directions.
– Alexander O'Mara
Dec 22 '18 at 7:06
add a comment |
1
Do you have any restrictions on the maximum distance of the gears or similar?
– Wrzlprmft
Dec 22 '18 at 7:05
@Wrzlprmft No necessarily, just that they turn in opposite directions.
– Alexander O'Mara
Dec 22 '18 at 7:06
1
1
Do you have any restrictions on the maximum distance of the gears or similar?
– Wrzlprmft
Dec 22 '18 at 7:05
Do you have any restrictions on the maximum distance of the gears or similar?
– Wrzlprmft
Dec 22 '18 at 7:05
@Wrzlprmft No necessarily, just that they turn in opposite directions.
– Alexander O'Mara
Dec 22 '18 at 7:06
@Wrzlprmft No necessarily, just that they turn in opposite directions.
– Alexander O'Mara
Dec 22 '18 at 7:06
add a comment |
2 Answers
2
active
oldest
votes
If you use a crown gear or bevel gear to connect your gears twice perpendicularly, they are exactly opposing each other, turn in opposite directions, and are parallel (if the respective axle is aligned to the coordinate system of the construction). Like with all gear-to-gear connections, you have a little wiggle room that may exceed half a tooth.
If you want the opposing gears next to each other, you can use further gears attached to these (coming with yet more wiggle room).
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
add a comment |
You could use a belt system to get a perfect, parallel rotation. The chain links used in this video are #3711 and the gears appear to be the same as the ones shown in your example.
There doesn't seem to be an easy way to get the gears to turn in opposite directions without the use of gears (without that half tooth lag).
Two high friction, Technic rubber wheels, placed directly against each other will rotate almost perfectly. Although they might de-synchronise after many revolutions.
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "336"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbricks.stackexchange.com%2fquestions%2f10714%2fhow-can-i-assemble-2-opposing-gears-so-that-the-axle-rotations-are-perfectly-par%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
If you use a crown gear or bevel gear to connect your gears twice perpendicularly, they are exactly opposing each other, turn in opposite directions, and are parallel (if the respective axle is aligned to the coordinate system of the construction). Like with all gear-to-gear connections, you have a little wiggle room that may exceed half a tooth.
If you want the opposing gears next to each other, you can use further gears attached to these (coming with yet more wiggle room).
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
add a comment |
If you use a crown gear or bevel gear to connect your gears twice perpendicularly, they are exactly opposing each other, turn in opposite directions, and are parallel (if the respective axle is aligned to the coordinate system of the construction). Like with all gear-to-gear connections, you have a little wiggle room that may exceed half a tooth.
If you want the opposing gears next to each other, you can use further gears attached to these (coming with yet more wiggle room).
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
add a comment |
If you use a crown gear or bevel gear to connect your gears twice perpendicularly, they are exactly opposing each other, turn in opposite directions, and are parallel (if the respective axle is aligned to the coordinate system of the construction). Like with all gear-to-gear connections, you have a little wiggle room that may exceed half a tooth.
If you want the opposing gears next to each other, you can use further gears attached to these (coming with yet more wiggle room).
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
If you use a crown gear or bevel gear to connect your gears twice perpendicularly, they are exactly opposing each other, turn in opposite directions, and are parallel (if the respective axle is aligned to the coordinate system of the construction). Like with all gear-to-gear connections, you have a little wiggle room that may exceed half a tooth.
If you want the opposing gears next to each other, you can use further gears attached to these (coming with yet more wiggle room).
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
answered Dec 22 '18 at 8:04
Wrzlprmft
1,509525
1,509525
add a comment |
add a comment |
You could use a belt system to get a perfect, parallel rotation. The chain links used in this video are #3711 and the gears appear to be the same as the ones shown in your example.
There doesn't seem to be an easy way to get the gears to turn in opposite directions without the use of gears (without that half tooth lag).
Two high friction, Technic rubber wheels, placed directly against each other will rotate almost perfectly. Although they might de-synchronise after many revolutions.
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
add a comment |
You could use a belt system to get a perfect, parallel rotation. The chain links used in this video are #3711 and the gears appear to be the same as the ones shown in your example.
There doesn't seem to be an easy way to get the gears to turn in opposite directions without the use of gears (without that half tooth lag).
Two high friction, Technic rubber wheels, placed directly against each other will rotate almost perfectly. Although they might de-synchronise after many revolutions.
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
add a comment |
You could use a belt system to get a perfect, parallel rotation. The chain links used in this video are #3711 and the gears appear to be the same as the ones shown in your example.
There doesn't seem to be an easy way to get the gears to turn in opposite directions without the use of gears (without that half tooth lag).
Two high friction, Technic rubber wheels, placed directly against each other will rotate almost perfectly. Although they might de-synchronise after many revolutions.
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
You could use a belt system to get a perfect, parallel rotation. The chain links used in this video are #3711 and the gears appear to be the same as the ones shown in your example.
There doesn't seem to be an easy way to get the gears to turn in opposite directions without the use of gears (without that half tooth lag).
Two high friction, Technic rubber wheels, placed directly against each other will rotate almost perfectly. Although they might de-synchronise after many revolutions.
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
answered Dec 22 '18 at 10:46
Ambo100♦
12.8k548132
12.8k548132
add a comment |
add a comment |
Thanks for contributing an answer to Bricks!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbricks.stackexchange.com%2fquestions%2f10714%2fhow-can-i-assemble-2-opposing-gears-so-that-the-axle-rotations-are-perfectly-par%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Do you have any restrictions on the maximum distance of the gears or similar?
– Wrzlprmft
Dec 22 '18 at 7:05
@Wrzlprmft No necessarily, just that they turn in opposite directions.
– Alexander O'Mara
Dec 22 '18 at 7:06