.cz





























.cz
CZ NIC
Introduced1993

TLD type		Country code top-level domain
StatusActive
RegistryCZ.NIC
SponsorCZ.NIC
Intended useEntities affiliated with the  Czech Republic
Actual useVery popular in the Czech Republic
Registration restrictionsBusinesses must provide tax registration number
StructureNames can be registered directly at second level
Documents
Rules
Juridical verdicts
Dispute policiesProblems
DNSSECyes
Registry Websitenic.cz

.cz is the country code top-level domain (ccTLD) for the Czech Republic. It is administered by CZ.NIC. Registrations must be ordered via accredited domain name registrars.


Before the split in 1993, former Czechoslovakia used domain .cs.


The maximum domain name length permitted is 63 characters, which may only be alphanumeric or the hyphen (-). Hyphens are restricted in that they may not be the first or last character, neither may they appear consecutively.[1] As of 2013, there are six domains which use the maximum of 63 characters.[2]



History


The .cz domain came into effect in January 1993, following the dissolution of Czechoslovakia.[3]
In 2009, new European Union legislation came into effect, allowing the use of diacritics in second-level domains under the .eu domain only. Czech customers were among the most interested in the new domains, only Germans bought more, with the French in third. The .cz domain, operated by the CZ.NIC association, continued to only offer standard characters, citing insufficient demand and lower accessibility from abroad as reasons behind their decision.[4]


Over 850,000 internet sites had been registered as .cz by the end of 2011.[5] In 2012, the number exceeded one million.[3] The Czech Republic was therefore the 12th European Union member state with a top-level domain to top a million active domain names.[6]


At the end of 2011, CZ.NIC reported that ownership of all domains, 58% were by individuals, whereas those held by organisations accounted for a minority of 42%.[5] Domains were most popular in Prague, followed by Brno and Ostrava.[5]



References




  1. ^ "Rules of Domain Name Registration Under ccTLD .cz" (PDF). Retrieved 21 January 2014..mw-parser-output cite.citationfont-style:inherit.mw-parser-output qquotes:"""""""'""'".mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-limited a,.mw-parser-output .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em


  2. ^ "10 domains with the highest number of characters". CZ.NIC. Retrieved 21 January 2014.


  3. ^ ab Willoughby, Ian (21 November 2012). "Millionth internet site with Czech .cz domain name registered". Radio Prague. Retrieved 21 January 2014.


  4. ^ Borufka, Sarah (11 December 2009). "New EU regulation allows use of diacritics for certain web domains". Radio Prague. Retrieved 21 January 2014.


  5. ^ abc "2011 Annual Report" (PDF). CZ.NIC. Retrieved 21 January 2014.


  6. ^ ".CZ Reaches One Million Active Domains". domainpulse.com. 23 November 2012. Retrieved 21 January 2014.




External links


  • IANA .cz whois information







-

Popular posts from this blog

How to check contact read email or not when send email to Individual?

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  |  up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Read more

Displaying single band from multi-band raster using QGIS

Image
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...
Read more

How many registers does an x86_64 CPU actually have?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Read more