How can you get any version of Linux to see the 2018 MacBook Pro SSD?

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP











up vote
17
down vote

favorite
3












I have tried
nvme_load=yes
in place of
quiet ---
with Ubuntu 18.04.1 and Xubuntu 18.04.
df -h results in only the system generated mounts and the installation media.
The weekly live including firmware image of Debian also fails to discover the ssd.



I have located more information on the SSD. I found this information in the system profiler on OS X High Sierra.



Apple SSD Controller:
APPLE SSD AP1024M:
Capacity: 1 TB (1,000,555,581,440 bytes)
TRIM Support: Yes
Model: APPLE SSD AP1024M
Revision: 177.77.7
Serial Number: C02829600M9JPD216
Link Width: x4
Link Speed: 8.0 GT/s
Detachable Drive: No
BSD Name: disk0
Partition Map Type: GPT (GUID Partition Table) .
Removable Media: No
S.M.A.R.T. status: Verified


lsblk from a xubuntu 18.04.1 live installer does not show any pcie or nvme devices.



Note: the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.










share|improve this question























  • Do the fail to discover it, or do they just fail to mount it?
    – RalfFriedl
    Aug 18 at 21:48










  • Well, the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.
    – Cheatcode
    Aug 18 at 22:22










  • It is fairly know the latest Mac models are not compatible yet.
    – Rui F Ribeiro
    Aug 19 at 13:52










  • This question is in a French newspaper: nextinpact.com/brief/…
    – Cœur
    Nov 7 at 2:22















up vote
17
down vote

favorite
3












I have tried
nvme_load=yes
in place of
quiet ---
with Ubuntu 18.04.1 and Xubuntu 18.04.
df -h results in only the system generated mounts and the installation media.
The weekly live including firmware image of Debian also fails to discover the ssd.



I have located more information on the SSD. I found this information in the system profiler on OS X High Sierra.



Apple SSD Controller:
APPLE SSD AP1024M:
Capacity: 1 TB (1,000,555,581,440 bytes)
TRIM Support: Yes
Model: APPLE SSD AP1024M
Revision: 177.77.7
Serial Number: C02829600M9JPD216
Link Width: x4
Link Speed: 8.0 GT/s
Detachable Drive: No
BSD Name: disk0
Partition Map Type: GPT (GUID Partition Table) .
Removable Media: No
S.M.A.R.T. status: Verified


lsblk from a xubuntu 18.04.1 live installer does not show any pcie or nvme devices.



Note: the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.










share|improve this question























  • Do the fail to discover it, or do they just fail to mount it?
    – RalfFriedl
    Aug 18 at 21:48










  • Well, the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.
    – Cheatcode
    Aug 18 at 22:22










  • It is fairly know the latest Mac models are not compatible yet.
    – Rui F Ribeiro
    Aug 19 at 13:52










  • This question is in a French newspaper: nextinpact.com/brief/…
    – Cœur
    Nov 7 at 2:22













up vote
17
down vote

favorite
3









up vote
17
down vote

favorite
3






3





I have tried
nvme_load=yes
in place of
quiet ---
with Ubuntu 18.04.1 and Xubuntu 18.04.
df -h results in only the system generated mounts and the installation media.
The weekly live including firmware image of Debian also fails to discover the ssd.



I have located more information on the SSD. I found this information in the system profiler on OS X High Sierra.



Apple SSD Controller:
APPLE SSD AP1024M:
Capacity: 1 TB (1,000,555,581,440 bytes)
TRIM Support: Yes
Model: APPLE SSD AP1024M
Revision: 177.77.7
Serial Number: C02829600M9JPD216
Link Width: x4
Link Speed: 8.0 GT/s
Detachable Drive: No
BSD Name: disk0
Partition Map Type: GPT (GUID Partition Table) .
Removable Media: No
S.M.A.R.T. status: Verified


lsblk from a xubuntu 18.04.1 live installer does not show any pcie or nvme devices.



Note: the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.










share|improve this question















I have tried
nvme_load=yes
in place of
quiet ---
with Ubuntu 18.04.1 and Xubuntu 18.04.
df -h results in only the system generated mounts and the installation media.
The weekly live including firmware image of Debian also fails to discover the ssd.



I have located more information on the SSD. I found this information in the system profiler on OS X High Sierra.



Apple SSD Controller:
APPLE SSD AP1024M:
Capacity: 1 TB (1,000,555,581,440 bytes)
TRIM Support: Yes
Model: APPLE SSD AP1024M
Revision: 177.77.7
Serial Number: C02829600M9JPD216
Link Width: x4
Link Speed: 8.0 GT/s
Detachable Drive: No
BSD Name: disk0
Partition Map Type: GPT (GUID Partition Table) .
Removable Media: No
S.M.A.R.T. status: Verified


lsblk from a xubuntu 18.04.1 live installer does not show any pcie or nvme devices.



Note: the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.







linux macintosh ssd






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Nov 20 at 6:31









muru

35.1k581154




35.1k581154










asked Aug 18 at 21:43









Cheatcode

8914




8914











  • Do the fail to discover it, or do they just fail to mount it?
    – RalfFriedl
    Aug 18 at 21:48










  • Well, the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.
    – Cheatcode
    Aug 18 at 22:22










  • It is fairly know the latest Mac models are not compatible yet.
    – Rui F Ribeiro
    Aug 19 at 13:52










  • This question is in a French newspaper: nextinpact.com/brief/…
    – Cœur
    Nov 7 at 2:22

















  • Do the fail to discover it, or do they just fail to mount it?
    – RalfFriedl
    Aug 18 at 21:48










  • Well, the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.
    – Cheatcode
    Aug 18 at 22:22










  • It is fairly know the latest Mac models are not compatible yet.
    – Rui F Ribeiro
    Aug 19 at 13:52










  • This question is in a French newspaper: nextinpact.com/brief/…
    – Cœur
    Nov 7 at 2:22
















Do the fail to discover it, or do they just fail to mount it?
– RalfFriedl
Aug 18 at 21:48




Do the fail to discover it, or do they just fail to mount it?
– RalfFriedl
Aug 18 at 21:48












Well, the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.
– Cheatcode
Aug 18 at 22:22




Well, the installer and Gparted fail to list it. Typically these both require an unmounted drive to work with. So, it simply does not see the SSD. I read that this system uses a PCIE SSD , though im not sure how to send a kernel module to allow use of it.
– Cheatcode
Aug 18 at 22:22












It is fairly know the latest Mac models are not compatible yet.
– Rui F Ribeiro
Aug 19 at 13:52




It is fairly know the latest Mac models are not compatible yet.
– Rui F Ribeiro
Aug 19 at 13:52












This question is in a French newspaper: nextinpact.com/brief/…
– Cœur
Nov 7 at 2:22





This question is in a French newspaper: nextinpact.com/brief/…
– Cœur
Nov 7 at 2:22











2 Answers
2






active

oldest

votes

















up vote
14
down vote













It's currently not possible to install anything except Windows 10 on Apple computers equipped with T2 chip. This security chip makes it impossible to see the internal drive, Apple generously did an exception only for Windows 10 (but only if you install it via Boot Camp).
A possible option could be Linux installed on a USB/Thunderbolt external drive, unfortunately I tried this only for Windows but it worked (though the internal drive was not visible).



Update: changing the Secure Boot option makes no difference.



Source






share|improve this answer


















  • 2




    Wow. Why the heck does turning off secure boot not fix the problem?! Apple says on their own site: "The 'No Security' setting doesn't enforce any of the above security requirements for your startup disk." Wat?!
    – Wowfunhappy
    Nov 6 at 14:50










  • I don't know, but it's sadly true.
    – GeekUser
    Nov 9 at 22:07

















up vote
11
down vote













I have a MacBook Pro Mid 2018 and managed to get the SSD working for like 10 seconds.



When you live boot Linux Mint or Ubuntu and do:



modprobe nvme


Then check for the hardware ID of the Apple Storage controller by doing:



lspci -nn | grep NVMe


Then put that ID in the new_id file under nvme:



echo 106b 2005 > /sys/bus/pci/drivers/nvme/new_id


When you did that it shows up under lsblk but only for like 10~30 seconds before the machine randomly turns off after 1second of full cooler spin 100%. I am not sure why this happens, but it does seem to detect it correctly as for me it showed a 500GB NVMe ssd under lsblk. I didn't manage to get gparted opened as it took longer than the time before it shuts off.






share|improve this answer


















  • 7




    I'd be careful assuming this actually defeated the lock. Depending on how the T2 works it could be waiting for access then detecting an unauthorized access attempt and shutting down the system for protection.
    – madscientist159
    Nov 5 at 21:23











Your Answer








StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);

else
createEditor();

);

function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);



);













 

draft saved


draft discarded


















StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f463422%2fhow-can-you-get-any-version-of-linux-to-see-the-2018-macbook-pro-ssd%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown

























2 Answers
2






active

oldest

votes








2 Answers
2






active

oldest

votes









active

oldest

votes






active

oldest

votes








up vote
14
down vote













It's currently not possible to install anything except Windows 10 on Apple computers equipped with T2 chip. This security chip makes it impossible to see the internal drive, Apple generously did an exception only for Windows 10 (but only if you install it via Boot Camp).
A possible option could be Linux installed on a USB/Thunderbolt external drive, unfortunately I tried this only for Windows but it worked (though the internal drive was not visible).



Update: changing the Secure Boot option makes no difference.



Source






share|improve this answer


















  • 2




    Wow. Why the heck does turning off secure boot not fix the problem?! Apple says on their own site: "The 'No Security' setting doesn't enforce any of the above security requirements for your startup disk." Wat?!
    – Wowfunhappy
    Nov 6 at 14:50










  • I don't know, but it's sadly true.
    – GeekUser
    Nov 9 at 22:07














up vote
14
down vote













It's currently not possible to install anything except Windows 10 on Apple computers equipped with T2 chip. This security chip makes it impossible to see the internal drive, Apple generously did an exception only for Windows 10 (but only if you install it via Boot Camp).
A possible option could be Linux installed on a USB/Thunderbolt external drive, unfortunately I tried this only for Windows but it worked (though the internal drive was not visible).



Update: changing the Secure Boot option makes no difference.



Source






share|improve this answer


















  • 2




    Wow. Why the heck does turning off secure boot not fix the problem?! Apple says on their own site: "The 'No Security' setting doesn't enforce any of the above security requirements for your startup disk." Wat?!
    – Wowfunhappy
    Nov 6 at 14:50










  • I don't know, but it's sadly true.
    – GeekUser
    Nov 9 at 22:07












up vote
14
down vote










up vote
14
down vote









It's currently not possible to install anything except Windows 10 on Apple computers equipped with T2 chip. This security chip makes it impossible to see the internal drive, Apple generously did an exception only for Windows 10 (but only if you install it via Boot Camp).
A possible option could be Linux installed on a USB/Thunderbolt external drive, unfortunately I tried this only for Windows but it worked (though the internal drive was not visible).



Update: changing the Secure Boot option makes no difference.



Source






share|improve this answer














It's currently not possible to install anything except Windows 10 on Apple computers equipped with T2 chip. This security chip makes it impossible to see the internal drive, Apple generously did an exception only for Windows 10 (but only if you install it via Boot Camp).
A possible option could be Linux installed on a USB/Thunderbolt external drive, unfortunately I tried this only for Windows but it worked (though the internal drive was not visible).



Update: changing the Secure Boot option makes no difference.



Source







share|improve this answer














share|improve this answer



share|improve this answer








edited Sep 24 at 17:41

























answered Sep 24 at 16:22









GeekUser

2417




2417







  • 2




    Wow. Why the heck does turning off secure boot not fix the problem?! Apple says on their own site: "The 'No Security' setting doesn't enforce any of the above security requirements for your startup disk." Wat?!
    – Wowfunhappy
    Nov 6 at 14:50










  • I don't know, but it's sadly true.
    – GeekUser
    Nov 9 at 22:07












  • 2




    Wow. Why the heck does turning off secure boot not fix the problem?! Apple says on their own site: "The 'No Security' setting doesn't enforce any of the above security requirements for your startup disk." Wat?!
    – Wowfunhappy
    Nov 6 at 14:50










  • I don't know, but it's sadly true.
    – GeekUser
    Nov 9 at 22:07







2




2




Wow. Why the heck does turning off secure boot not fix the problem?! Apple says on their own site: "The 'No Security' setting doesn't enforce any of the above security requirements for your startup disk." Wat?!
– Wowfunhappy
Nov 6 at 14:50




Wow. Why the heck does turning off secure boot not fix the problem?! Apple says on their own site: "The 'No Security' setting doesn't enforce any of the above security requirements for your startup disk." Wat?!
– Wowfunhappy
Nov 6 at 14:50












I don't know, but it's sadly true.
– GeekUser
Nov 9 at 22:07




I don't know, but it's sadly true.
– GeekUser
Nov 9 at 22:07












up vote
11
down vote













I have a MacBook Pro Mid 2018 and managed to get the SSD working for like 10 seconds.



When you live boot Linux Mint or Ubuntu and do:



modprobe nvme


Then check for the hardware ID of the Apple Storage controller by doing:



lspci -nn | grep NVMe


Then put that ID in the new_id file under nvme:



echo 106b 2005 > /sys/bus/pci/drivers/nvme/new_id


When you did that it shows up under lsblk but only for like 10~30 seconds before the machine randomly turns off after 1second of full cooler spin 100%. I am not sure why this happens, but it does seem to detect it correctly as for me it showed a 500GB NVMe ssd under lsblk. I didn't manage to get gparted opened as it took longer than the time before it shuts off.






share|improve this answer


















  • 7




    I'd be careful assuming this actually defeated the lock. Depending on how the T2 works it could be waiting for access then detecting an unauthorized access attempt and shutting down the system for protection.
    – madscientist159
    Nov 5 at 21:23















up vote
11
down vote













I have a MacBook Pro Mid 2018 and managed to get the SSD working for like 10 seconds.



When you live boot Linux Mint or Ubuntu and do:



modprobe nvme


Then check for the hardware ID of the Apple Storage controller by doing:



lspci -nn | grep NVMe


Then put that ID in the new_id file under nvme:



echo 106b 2005 > /sys/bus/pci/drivers/nvme/new_id


When you did that it shows up under lsblk but only for like 10~30 seconds before the machine randomly turns off after 1second of full cooler spin 100%. I am not sure why this happens, but it does seem to detect it correctly as for me it showed a 500GB NVMe ssd under lsblk. I didn't manage to get gparted opened as it took longer than the time before it shuts off.






share|improve this answer


















  • 7




    I'd be careful assuming this actually defeated the lock. Depending on how the T2 works it could be waiting for access then detecting an unauthorized access attempt and shutting down the system for protection.
    – madscientist159
    Nov 5 at 21:23













up vote
11
down vote










up vote
11
down vote









I have a MacBook Pro Mid 2018 and managed to get the SSD working for like 10 seconds.



When you live boot Linux Mint or Ubuntu and do:



modprobe nvme


Then check for the hardware ID of the Apple Storage controller by doing:



lspci -nn | grep NVMe


Then put that ID in the new_id file under nvme:



echo 106b 2005 > /sys/bus/pci/drivers/nvme/new_id


When you did that it shows up under lsblk but only for like 10~30 seconds before the machine randomly turns off after 1second of full cooler spin 100%. I am not sure why this happens, but it does seem to detect it correctly as for me it showed a 500GB NVMe ssd under lsblk. I didn't manage to get gparted opened as it took longer than the time before it shuts off.






share|improve this answer














I have a MacBook Pro Mid 2018 and managed to get the SSD working for like 10 seconds.



When you live boot Linux Mint or Ubuntu and do:



modprobe nvme


Then check for the hardware ID of the Apple Storage controller by doing:



lspci -nn | grep NVMe


Then put that ID in the new_id file under nvme:



echo 106b 2005 > /sys/bus/pci/drivers/nvme/new_id


When you did that it shows up under lsblk but only for like 10~30 seconds before the machine randomly turns off after 1second of full cooler spin 100%. I am not sure why this happens, but it does seem to detect it correctly as for me it showed a 500GB NVMe ssd under lsblk. I didn't manage to get gparted opened as it took longer than the time before it shuts off.







share|improve this answer














share|improve this answer



share|improve this answer








edited Nov 11 at 16:43









Jeff Schaller

36.4k952120




36.4k952120










answered Nov 3 at 9:37









Menno van leeuwen

11113




11113







  • 7




    I'd be careful assuming this actually defeated the lock. Depending on how the T2 works it could be waiting for access then detecting an unauthorized access attempt and shutting down the system for protection.
    – madscientist159
    Nov 5 at 21:23













  • 7




    I'd be careful assuming this actually defeated the lock. Depending on how the T2 works it could be waiting for access then detecting an unauthorized access attempt and shutting down the system for protection.
    – madscientist159
    Nov 5 at 21:23








7




7




I'd be careful assuming this actually defeated the lock. Depending on how the T2 works it could be waiting for access then detecting an unauthorized access attempt and shutting down the system for protection.
– madscientist159
Nov 5 at 21:23





I'd be careful assuming this actually defeated the lock. Depending on how the T2 works it could be waiting for access then detecting an unauthorized access attempt and shutting down the system for protection.
– madscientist159
Nov 5 at 21:23


















 

draft saved


draft discarded















































 


draft saved


draft discarded














StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f463422%2fhow-can-you-get-any-version-of-linux-to-see-the-2018-macbook-pro-ssd%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown






Popular posts from this blog

How to check contact read email or not when send email to Individual?

Displaying single band from multi-band raster using QGIS

How many registers does an x86_64 CPU actually have?