Startup problem: invalid partition table or use UEFI BOOT
Clash Royale CLAN TAG#URR8PPP
up vote
4
down vote
favorite
I'm working on a Dell Latitude E5430. Recently I booted pcbsd from USB using this file:
PCBSD10.1.1-RELEASE-01-31-2015-x64-DVD-USB_0.iso
But I guess I did something wrong. I was trying to install Solaris earlier, and I think I accidentally changed disk setup somehow.
Now, if I try to start up, I get the message
invalid partition table!
and fail to start.
If I press F12 and enter the boot option screen, I can choose:
UEFI BOOT:UEFI: Hard Drive
This way, I can start the system.
If I change the BIOS setup and disable the internal HDD, I get:
PXE-E61: Media test failure, check table
PXE-M0F: Exiting Broadcom PXE ROM.
No Boot Device Found. Press any key to reboot the machine
Does anyone know how to solve this?
boot partition hard-disk startup uefi
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
asked Jun 14 '15 at 20:57
lilysirius
2114
add a comment |Â
up vote
4
down vote
favorite
I'm working on a Dell Latitude E5430. Recently I booted pcbsd from USB using this file:
PCBSD10.1.1-RELEASE-01-31-2015-x64-DVD-USB_0.iso
But I guess I did something wrong. I was trying to install Solaris earlier, and I think I accidentally changed disk setup somehow.
Now, if I try to start up, I get the message
invalid partition table!
and fail to start.
If I press F12 and enter the boot option screen, I can choose:
UEFI BOOT:UEFI: Hard Drive
This way, I can start the system.
If I change the BIOS setup and disable the internal HDD, I get:
PXE-E61: Media test failure, check table
PXE-M0F: Exiting Broadcom PXE ROM.
No Boot Device Found. Press any key to reboot the machine
Does anyone know how to solve this?
boot partition hard-disk startup uefi
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
asked Jun 14 '15 at 20:57
lilysirius
2114
add a comment |Â
up vote
4
down vote
favorite
up vote
4
down vote
favorite
I'm working on a Dell Latitude E5430. Recently I booted pcbsd from USB using this file:
PCBSD10.1.1-RELEASE-01-31-2015-x64-DVD-USB_0.iso
But I guess I did something wrong. I was trying to install Solaris earlier, and I think I accidentally changed disk setup somehow.
Now, if I try to start up, I get the message
invalid partition table!
and fail to start.
If I press F12 and enter the boot option screen, I can choose:
UEFI BOOT:UEFI: Hard Drive
This way, I can start the system.
If I change the BIOS setup and disable the internal HDD, I get:
PXE-E61: Media test failure, check table
PXE-M0F: Exiting Broadcom PXE ROM.
No Boot Device Found. Press any key to reboot the machine
Does anyone know how to solve this?
boot partition hard-disk startup uefi
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
asked Jun 14 '15 at 20:57
lilysirius
2114
I'm working on a Dell Latitude E5430. Recently I booted pcbsd from USB using this file:
PCBSD10.1.1-RELEASE-01-31-2015-x64-DVD-USB_0.iso
But I guess I did something wrong. I was trying to install Solaris earlier, and I think I accidentally changed disk setup somehow.
Now, if I try to start up, I get the message
invalid partition table!
and fail to start.
If I press F12 and enter the boot option screen, I can choose:
UEFI BOOT:UEFI: Hard Drive
This way, I can start the system.
If I change the BIOS setup and disable the internal HDD, I get:
PXE-E61: Media test failure, check table
PXE-M0F: Exiting Broadcom PXE ROM.
No Boot Device Found. Press any key to reboot the machine
Does anyone know how to solve this?
boot partition hard-disk startup uefi
boot partition hard-disk startup uefi
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
asked Jun 14 '15 at 20:57
lilysirius
2114
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
asked Jun 14 '15 at 20:57
lilysirius
2114
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
edited Jun 14 '15 at 21:31
G-Man
11.8k92658
11.8k92658
asked Jun 14 '15 at 20:57
lilysirius
2114
asked Jun 14 '15 at 20:57
lilysirius
2114
asked Jun 14 '15 at 20:57
lilysirius
2114
2114
add a comment |Â
add a comment |Â
2 Answers
2
active
oldest
votes
up vote
0
down vote
Might be a missing "active partition" within DOS Partition Table, just ran into that with E5450 and Linux -- fire up fdisk and check/set.
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
add a comment |Â
up vote
0
down vote
The F12 boot option screen seems to indicate that the disk is currently configured as UEFI-bootable. That is, it has a GPT partition table and an ESP boot partition.
If the system is now configured to attempt legacy-style booting, it would try to find a legacy-style boot code (Master Boot Record, or MBR for short) in the first block of the hard disk. A GPT-partitioned disk will have a "protective MBR": a MBR-compatible first block that basically says: "this disk is completely used by a strange partition type that is not bootable using legacy-style methods".
If your system is now configured to attempt a legacy-style boot off the hard disk, that would explain the invalid partition table message: the GPT-partitioned disk is indeed invalid for legacy-style booting.
Press F2 at boot to enter Setup for your system, and find the Boot List Option setting. If it is set to Legacy, that might explain the problem: change it to UEFI and then look at the Boot Sequence options again: they might look slightly different now. Make sure that the hard disk is still selected and try again. If you see the name of your OS/bootloader in the UEFI boot sequence list, pick it instead.
answered Feb 13 at 10:45
telcoM
12k11335
add a comment |Â
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Might be a missing "active partition" within DOS Partition Table, just ran into that with E5450 and Linux -- fire up fdisk and check/set.
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
add a comment |Â
up vote
0
down vote
Might be a missing "active partition" within DOS Partition Table, just ran into that with E5450 and Linux -- fire up fdisk and check/set.
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
add a comment |Â
up vote
0
down vote
up vote
0
down vote
Might be a missing "active partition" within DOS Partition Table, just ran into that with E5450 and Linux -- fire up fdisk and check/set.
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
Might be a missing "active partition" within DOS Partition Table, just ran into that with E5450 and Linux -- fire up fdisk and check/set.
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
answered Jun 9 '16 at 9:01
Michael Shigorin
75259
75259
add a comment |Â
add a comment |Â
up vote
0
down vote
The F12 boot option screen seems to indicate that the disk is currently configured as UEFI-bootable. That is, it has a GPT partition table and an ESP boot partition.
If the system is now configured to attempt legacy-style booting, it would try to find a legacy-style boot code (Master Boot Record, or MBR for short) in the first block of the hard disk. A GPT-partitioned disk will have a "protective MBR": a MBR-compatible first block that basically says: "this disk is completely used by a strange partition type that is not bootable using legacy-style methods".
If your system is now configured to attempt a legacy-style boot off the hard disk, that would explain the invalid partition table message: the GPT-partitioned disk is indeed invalid for legacy-style booting.
Press F2 at boot to enter Setup for your system, and find the Boot List Option setting. If it is set to Legacy, that might explain the problem: change it to UEFI and then look at the Boot Sequence options again: they might look slightly different now. Make sure that the hard disk is still selected and try again. If you see the name of your OS/bootloader in the UEFI boot sequence list, pick it instead.
answered Feb 13 at 10:45
telcoM
12k11335
add a comment |Â
up vote
0
down vote
The F12 boot option screen seems to indicate that the disk is currently configured as UEFI-bootable. That is, it has a GPT partition table and an ESP boot partition.
If the system is now configured to attempt legacy-style booting, it would try to find a legacy-style boot code (Master Boot Record, or MBR for short) in the first block of the hard disk. A GPT-partitioned disk will have a "protective MBR": a MBR-compatible first block that basically says: "this disk is completely used by a strange partition type that is not bootable using legacy-style methods".
If your system is now configured to attempt a legacy-style boot off the hard disk, that would explain the invalid partition table message: the GPT-partitioned disk is indeed invalid for legacy-style booting.
Press F2 at boot to enter Setup for your system, and find the Boot List Option setting. If it is set to Legacy, that might explain the problem: change it to UEFI and then look at the Boot Sequence options again: they might look slightly different now. Make sure that the hard disk is still selected and try again. If you see the name of your OS/bootloader in the UEFI boot sequence list, pick it instead.
answered Feb 13 at 10:45
telcoM
12k11335
add a comment |Â
up vote
0
down vote
up vote
0
down vote
The F12 boot option screen seems to indicate that the disk is currently configured as UEFI-bootable. That is, it has a GPT partition table and an ESP boot partition.
If the system is now configured to attempt legacy-style booting, it would try to find a legacy-style boot code (Master Boot Record, or MBR for short) in the first block of the hard disk. A GPT-partitioned disk will have a "protective MBR": a MBR-compatible first block that basically says: "this disk is completely used by a strange partition type that is not bootable using legacy-style methods".
If your system is now configured to attempt a legacy-style boot off the hard disk, that would explain the invalid partition table message: the GPT-partitioned disk is indeed invalid for legacy-style booting.
Press F2 at boot to enter Setup for your system, and find the Boot List Option setting. If it is set to Legacy, that might explain the problem: change it to UEFI and then look at the Boot Sequence options again: they might look slightly different now. Make sure that the hard disk is still selected and try again. If you see the name of your OS/bootloader in the UEFI boot sequence list, pick it instead.
answered Feb 13 at 10:45
telcoM
12k11335
The F12 boot option screen seems to indicate that the disk is currently configured as UEFI-bootable. That is, it has a GPT partition table and an ESP boot partition.
If the system is now configured to attempt legacy-style booting, it would try to find a legacy-style boot code (Master Boot Record, or MBR for short) in the first block of the hard disk. A GPT-partitioned disk will have a "protective MBR": a MBR-compatible first block that basically says: "this disk is completely used by a strange partition type that is not bootable using legacy-style methods".
If your system is now configured to attempt a legacy-style boot off the hard disk, that would explain the invalid partition table message: the GPT-partitioned disk is indeed invalid for legacy-style booting.
Press F2 at boot to enter Setup for your system, and find the Boot List Option setting. If it is set to Legacy, that might explain the problem: change it to UEFI and then look at the Boot Sequence options again: they might look slightly different now. Make sure that the hard disk is still selected and try again. If you see the name of your OS/bootloader in the UEFI boot sequence list, pick it instead.
answered Feb 13 at 10:45
telcoM
12k11335
answered Feb 13 at 10:45
telcoM
12k11335
answered Feb 13 at 10:45
telcoM
12k11335
answered Feb 13 at 10:45
telcoM
12k11335
12k11335
add a comment |Â
add a comment |Â
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f209639%2fstartup-problem-invalid-partition-table-or-use-uefi-boot%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
