Mô Kim Quyết - Quỷ Môn Thiên Sư

Multi tool useThông tin truyện
Tác giả:
Thiên Hạ Bá Xương
Thể loại:
Huyền Huyễn, Linh Dị, Thám Hiểm, Trinh Thám
Nguồn:
facebook.com/MaThoiDen/
Trạng thái:
Đang ra
Mô Kim Quyết - Quỷ Môn Thiên Sư
Đánh giá: 10.0/10 từ 5 lượt
Dịch: Đặng Nam
Những năm 60 của thế kỉ XX, một phong trào sục sôi, cuồng nhiệt cuốn qua khắp mọi miền đất nước (Trans: Tức là Trung Quốc). Tôi và Tuyền béo, bộ binh bọn tôi bị phân công về tham gia sản xuất kiến thiết tại Hắc Long Giang, binh đoàn nông khẩn, nông trường số 17 của sư đoàn 3. Mắt thấy mùa đông sắp đến, lão trung đội trưởng an bài ba người là tôi cùng Tuyền béo và nhân viên liên lạc trực ở lại để trông coi vật tư, còn mình thì dẫn theo những người khác rời khỏi nông trường. Mấy người chúng tôi ở lại trông coi nông trường, phát hiện củi gỗ trong nhà kho ngày càng ít. Băng tuyết phủ kín núi, củi lửa chính là mạng sống của mỗi người. Thì ra là do một con hồ ly kiếm chuyện báo thù, lén lút lấy đi củi. Ít hôm sau, một trận bão tuyết trước giờ chưa từng thấy ập đến, mấy người dự tính úp sọt con hồ ly, chẳng ngờ gặp phải một đàn sói từ Siberia tới đang tán loạn chạy bão, vì chạy thoát thân nên đi theo con hồ ly chui vào một cái hang đất, nhưng mà lại nhầm lẫn đâm đầu vào một cổ mộ từ thời nhà Liêu bị che giấu từ vạn năm trước….
Xem thêm »
Các chương mới nhất
Chương 1: Lão Thử Lĩnh Đả Thiên Đăng
Danh sách chương
Chương 1: Lão Thử Lĩnh Đả Thiên Đăng
ng66bT JX I8CeUnNenOVtXW8K5eh ojlxg re6lHrV PGTjzW3CWemJftGTXfNc,o BEFwBXR CCEMszQEhcx2
Popular posts from this blog
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this question asked Sep 26 at 0:12 ToanLuong 49 9 add a comment  | up vote 1 down vote favorite I'm using WordPress 4.9.8, CiviCRM to 5.5.1, I usually send email to contact by Search> Find contacts View contact details Action> Send email Send email ok, Contact received mail ok like picture But status only Email sent though contact read email or not. So, can CiviCRM can change status to Email read when contact read email? wordpress email share | improve this questi...
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am currently learning reverse engineering and am studying the flags register. I had in my mind that rflags was just another name for one of the 16 general purpose registers, for example rax or rbx . But it looks like rflags is actually an additional register. So that makes 17 registers in total... how many more could there be? I have spent at least an hour on this and found numerous different answers. The best answer so far is this, which says that there are 40 registers in total. 16 General Purpose Registers 2 Status Registers 6 Code Segment Registers 16 SSE Registers 8 FPU/MMX Registers But if I add that up, I get 48. Could anybody provide an official answer on how many registers an x86_64 CPU has (e.g. an Intel i7). Additionally, I have seen references to 'hardware' and 'architectural' registers. What are those registers and how many are there? register x86-64 share | improve this...
Clash Royale CLAN TAG #URR8PPP 1 How can I extract a single band from multi-band raster in QGIS? I have an remote sensed image which has 6 bands (including NDVI band), I want to display each band separately, but have no idea how to do. I have seen some questions similar here but none worked for me. The original image (has 6 bands) is: I want to display the band 6 which should be like this: But I tried gdal_translate, and couldn't get the correct result. What I have got is: qgis raster multi-band share | improve this question edited Mar 5 at 0:53 Summer asked Mar 4 at 6:42 Summer Summer 23 6 Is this any help gis.stackexchange.com/questions/220658/… ? if not gis.stackexchange.com/questions/62133/… might help. – Michael Stimson Mar 4 at 6:46 Thanks for answering but when I used gdal_translate, qgis showed that 'Error 4: Kayena.tif: No such file or directory". Would you know how to fi...