TL-WN822N wifi not establishing AP mode in armv7l
Clash Royale CLAN TAG#URR8PPP
up vote
0
down vote
favorite
I'm using odroid-xu4 with dietpi OS. I wished to use TL-WN822N wifi device as a hotspot. So I installed a driver of rtl8192eu by using this https://github.com/Mange/rtl8192eu-linux-driver
It installed correctly. After I installed hostapd and dnsmasq for it to work as a hotspot , hostapd is not running. It is always showing "exited".
The ifconfig result:
The iwconfig result:
My lsusb result:
My lshw result:
M hostapd /etc/hostapd/hostapd.conf result:
my hostapd.conf file contains:
interface=wlan1
driver=nl80211
ssid=WiFi-TV1
hw_mode=g
channel=3
ieee80211n=1
wmm_enabled=1
ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40]
macaddr_acl=0
ignore_broadcast_ssid=0
rsn_pairwise=CCMP
My wifi device details:https://wikidevi.com/wiki/TP-LINK_TL-WN822N_v4
My dmesg output:
[ 7.011912] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 767.652339] usb 3-1.1: new high-speed USB device number 4 using xhci-hcd
[ 767.753321] usb 3-1.1: New USB device found, idVendor=2357, idProduct=0108
[ 767.753352] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 767.753373] usb 3-1.1: Product: 802.11n NIC
[ 767.753393] usb 3-1.1: Manufacturer: Realtek
[ 767.753413] usb 3-1.1: SerialNumber: 00e04c000001
[ 767.839986] usb 3-1.1: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[ 767.839996] usb 3-1.1: Please report results to Jes.Sorensen@gmail.com
[ 767.934329] usb 3-1.1: Vendor: Realtek
[ 767.934336] usb 3-1.1: Product: 802.11n NI
[ 767.934341] usb 3-1.1: Serial:
[ 767.934347] usb 3-1.1: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 767.934354] usb 3-1.1: 00: 29 81 00 7c 01 40 03 00
[ 767.934359] usb 3-1.1: 08: 40 74 04 50 14 00 00 00
[ 767.934364] usb 3-1.1: 10: 2b 2b 2b 2b 2b 2b 2c 2c
[ 767.934369] usb 3-1.1: 18: 2b 2c 2c f2 ef ef ff ff
[ 767.934374] usb 3-1.1: 20: ff ff ff ff ff ff ff ff
[ 767.934379] usb 3-1.1: 28: ff ff ff ff ff ff ff ff
[ 767.934384] usb 3-1.1: 30: ff ff ff ff ff ff ff ff
[ 767.934389] usb 3-1.1: 38: ff ff 29 29 28 28 28 28
[ 767.934394] usb 3-1.1: 40: 28 28 28 28 28 f2 ef ef
[ 767.934399] usb 3-1.1: 48: ff ff ff ff ff ff ff ff
[ 767.934404] usb 3-1.1: 50: ff ff ff ff ff ff ff ff
[ 767.934408] usb 3-1.1: 58: ff ff ff ff ff ff ff ff
[ 767.934413] usb 3-1.1: 60: ff ff ff ff ff ff ff ff
[ 767.934418] usb 3-1.1: 68: ff ff ff ff ff ff ff ff
[ 767.934423] usb 3-1.1: 70: ff ff ff ff ff ff ff ff
[ 767.934428] usb 3-1.1: 78: ff ff ff ff ff ff ff ff
[ 767.934433] usb 3-1.1: 80: ff ff ff ff ff ff ff ff
[ 767.934438] usb 3-1.1: 88: ff ff ff ff ff ff ff ff
[ 767.934442] usb 3-1.1: 90: ff ff ff ff ff ff ff ff
[ 767.934447] usb 3-1.1: 98: ff ff ff ff ff ff ff ff
[ 767.934452] usb 3-1.1: a0: ff ff ff ff ff ff ff ff
[ 767.934457] usb 3-1.1: a8: ff ff ff ff ff ff ff ff
[ 767.934462] usb 3-1.1: b0: ff ff ff ff ff ff ff ff
[ 767.934466] usb 3-1.1: b8: a1 3e 1d 00 00 00 ff ff
[ 767.934472] usb 3-1.1: c0: ff 01 00 10 00 00 00 ff
[ 767.934476] usb 3-1.1: c8: 00 00 ff ff ff ff ff ff
[ 767.934481] usb 3-1.1: d0: 57 23 08 01 e7 47 02 7c
[ 767.934486] usb 3-1.1: d8: 8b ca 18 08 62 0a 03 52
[ 767.934491] usb 3-1.1: e0: 65 61 6c 74 65 6b 20 0e
[ 767.934495] usb 3-1.1: e8: 03 38 30 32 2e 31 31 6e
[ 767.934500] usb 3-1.1: f0: 20 4e 49 43 20 00 00 ff
[ 767.934505] usb 3-1.1: f8: ff ff ff ff ff ff ff ff
[ 767.934510] usb 3-1.1: 100: ff ff ff ff ff ff ff ff
[ 767.934515] usb 3-1.1: 108: ff ff ff ff ff ff ff ff
[ 767.934519] usb 3-1.1: 110: ff ff ff ff ff ff ff 0d
[ 767.934524] usb 3-1.1: 118: 03 00 05 00 30 00 00 00
[ 767.934529] usb 3-1.1: 120: 00 93 ff ff ff ff ff ff
[ 767.934534] usb 3-1.1: 128: ff ff ff ff ff ff ff ff
[ 767.934539] usb 3-1.1: 130: f6 a8 98 2d 03 92 98 00
[ 767.934543] usb 3-1.1: 138: fc 8c 00 11 9b 44 02 0a
[ 767.934548] usb 3-1.1: 140: ff ff ff ff ff ff ff ff
[ 767.934553] usb 3-1.1: 148: ff ff ff ff ff ff ff ff
[ 767.934558] usb 3-1.1: 150: ff ff ff ff ff ff ff ff
[ 767.934562] usb 3-1.1: 158: ff ff ff ff ff ff ff ff
[ 767.934567] usb 3-1.1: 160: ff ff ff ff ff ff ff ff
[ 767.934572] usb 3-1.1: 168: ff ff ff ff ff ff ff ff
[ 767.934577] usb 3-1.1: 170: ff ff ff ff ff ff ff ff
[ 767.934582] usb 3-1.1: 178: ff ff ff ff ff ff ff ff
[ 767.934586] usb 3-1.1: 180: ff ff ff ff ff ff ff ff
[ 767.934591] usb 3-1.1: 188: ff ff ff ff ff ff ff ff
[ 767.934596] usb 3-1.1: 190: ff ff ff ff ff ff ff ff
[ 767.934601] usb 3-1.1: 198: ff ff ff ff ff ff ff ff
[ 767.934605] usb 3-1.1: 1a0: ff ff ff ff ff ff ff ff
[ 767.934610] usb 3-1.1: 1a8: ff ff ff ff ff ff ff ff
[ 767.934615] usb 3-1.1: 1b0: ff ff ff ff ff ff ff ff
[ 767.934620] usb 3-1.1: 1b8: ff ff ff ff ff ff ff ff
[ 767.934624] usb 3-1.1: 1c0: ff ff ff ff ff ff ff ff
[ 767.934629] usb 3-1.1: 1c8: ff ff ff ff ff ff ff ff
[ 767.934634] usb 3-1.1: 1d0: ff ff ff ff ff ff ff ff
[ 767.934639] usb 3-1.1: 1d8: ff ff ff ff ff ff ff ff
[ 767.934643] usb 3-1.1: 1e0: ff ff ff ff ff ff ff ff
[ 767.934648] usb 3-1.1: 1e8: ff ff ff ff ff ff ff ff
[ 767.934653] usb 3-1.1: 1f0: ff ff ff ff ff ff ff ff
[ 767.934658] usb 3-1.1: 1f8: ff ff ff ff ff ff ff ff
[ 767.934664] usb 3-1.1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 767.934670] usb 3-1.1: RTL8192EU MAC: 7c:8b:ca:18:08:62
[ 767.934676] usb 3-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 767.939193] usb 3-1.1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
[ 767.939203] usb 3-1.1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed
[ 767.939210] usb 3-1.1: Fatal - failed to load firmware
[ 767.939241] rtl8xxxu: probe of 3-1.1:1.0 failed with error -11
[ 767.939286] usbcore: registered new interface driver rtl8xxxu
drivers hardware realtek hostapd arch-arm
edited May 19 at 17:24
55597
1124
asked Apr 18 at 12:57
akash
83
 |Â
show 2 more comments
up vote
0
down vote
favorite
I'm using odroid-xu4 with dietpi OS. I wished to use TL-WN822N wifi device as a hotspot. So I installed a driver of rtl8192eu by using this https://github.com/Mange/rtl8192eu-linux-driver
It installed correctly. After I installed hostapd and dnsmasq for it to work as a hotspot , hostapd is not running. It is always showing "exited".
The ifconfig result:
The iwconfig result:
My lsusb result:
My lshw result:
M hostapd /etc/hostapd/hostapd.conf result:
my hostapd.conf file contains:
interface=wlan1
driver=nl80211
ssid=WiFi-TV1
hw_mode=g
channel=3
ieee80211n=1
wmm_enabled=1
ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40]
macaddr_acl=0
ignore_broadcast_ssid=0
rsn_pairwise=CCMP
My wifi device details:https://wikidevi.com/wiki/TP-LINK_TL-WN822N_v4
My dmesg output:
[ 7.011912] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 767.652339] usb 3-1.1: new high-speed USB device number 4 using xhci-hcd
[ 767.753321] usb 3-1.1: New USB device found, idVendor=2357, idProduct=0108
[ 767.753352] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 767.753373] usb 3-1.1: Product: 802.11n NIC
[ 767.753393] usb 3-1.1: Manufacturer: Realtek
[ 767.753413] usb 3-1.1: SerialNumber: 00e04c000001
[ 767.839986] usb 3-1.1: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[ 767.839996] usb 3-1.1: Please report results to Jes.Sorensen@gmail.com
[ 767.934329] usb 3-1.1: Vendor: Realtek
[ 767.934336] usb 3-1.1: Product: 802.11n NI
[ 767.934341] usb 3-1.1: Serial:
[ 767.934347] usb 3-1.1: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 767.934354] usb 3-1.1: 00: 29 81 00 7c 01 40 03 00
[ 767.934359] usb 3-1.1: 08: 40 74 04 50 14 00 00 00
[ 767.934364] usb 3-1.1: 10: 2b 2b 2b 2b 2b 2b 2c 2c
[ 767.934369] usb 3-1.1: 18: 2b 2c 2c f2 ef ef ff ff
[ 767.934374] usb 3-1.1: 20: ff ff ff ff ff ff ff ff
[ 767.934379] usb 3-1.1: 28: ff ff ff ff ff ff ff ff
[ 767.934384] usb 3-1.1: 30: ff ff ff ff ff ff ff ff
[ 767.934389] usb 3-1.1: 38: ff ff 29 29 28 28 28 28
[ 767.934394] usb 3-1.1: 40: 28 28 28 28 28 f2 ef ef
[ 767.934399] usb 3-1.1: 48: ff ff ff ff ff ff ff ff
[ 767.934404] usb 3-1.1: 50: ff ff ff ff ff ff ff ff
[ 767.934408] usb 3-1.1: 58: ff ff ff ff ff ff ff ff
[ 767.934413] usb 3-1.1: 60: ff ff ff ff ff ff ff ff
[ 767.934418] usb 3-1.1: 68: ff ff ff ff ff ff ff ff
[ 767.934423] usb 3-1.1: 70: ff ff ff ff ff ff ff ff
[ 767.934428] usb 3-1.1: 78: ff ff ff ff ff ff ff ff
[ 767.934433] usb 3-1.1: 80: ff ff ff ff ff ff ff ff
[ 767.934438] usb 3-1.1: 88: ff ff ff ff ff ff ff ff
[ 767.934442] usb 3-1.1: 90: ff ff ff ff ff ff ff ff
[ 767.934447] usb 3-1.1: 98: ff ff ff ff ff ff ff ff
[ 767.934452] usb 3-1.1: a0: ff ff ff ff ff ff ff ff
[ 767.934457] usb 3-1.1: a8: ff ff ff ff ff ff ff ff
[ 767.934462] usb 3-1.1: b0: ff ff ff ff ff ff ff ff
[ 767.934466] usb 3-1.1: b8: a1 3e 1d 00 00 00 ff ff
[ 767.934472] usb 3-1.1: c0: ff 01 00 10 00 00 00 ff
[ 767.934476] usb 3-1.1: c8: 00 00 ff ff ff ff ff ff
[ 767.934481] usb 3-1.1: d0: 57 23 08 01 e7 47 02 7c
[ 767.934486] usb 3-1.1: d8: 8b ca 18 08 62 0a 03 52
[ 767.934491] usb 3-1.1: e0: 65 61 6c 74 65 6b 20 0e
[ 767.934495] usb 3-1.1: e8: 03 38 30 32 2e 31 31 6e
[ 767.934500] usb 3-1.1: f0: 20 4e 49 43 20 00 00 ff
[ 767.934505] usb 3-1.1: f8: ff ff ff ff ff ff ff ff
[ 767.934510] usb 3-1.1: 100: ff ff ff ff ff ff ff ff
[ 767.934515] usb 3-1.1: 108: ff ff ff ff ff ff ff ff
[ 767.934519] usb 3-1.1: 110: ff ff ff ff ff ff ff 0d
[ 767.934524] usb 3-1.1: 118: 03 00 05 00 30 00 00 00
[ 767.934529] usb 3-1.1: 120: 00 93 ff ff ff ff ff ff
[ 767.934534] usb 3-1.1: 128: ff ff ff ff ff ff ff ff
[ 767.934539] usb 3-1.1: 130: f6 a8 98 2d 03 92 98 00
[ 767.934543] usb 3-1.1: 138: fc 8c 00 11 9b 44 02 0a
[ 767.934548] usb 3-1.1: 140: ff ff ff ff ff ff ff ff
[ 767.934553] usb 3-1.1: 148: ff ff ff ff ff ff ff ff
[ 767.934558] usb 3-1.1: 150: ff ff ff ff ff ff ff ff
[ 767.934562] usb 3-1.1: 158: ff ff ff ff ff ff ff ff
[ 767.934567] usb 3-1.1: 160: ff ff ff ff ff ff ff ff
[ 767.934572] usb 3-1.1: 168: ff ff ff ff ff ff ff ff
[ 767.934577] usb 3-1.1: 170: ff ff ff ff ff ff ff ff
[ 767.934582] usb 3-1.1: 178: ff ff ff ff ff ff ff ff
[ 767.934586] usb 3-1.1: 180: ff ff ff ff ff ff ff ff
[ 767.934591] usb 3-1.1: 188: ff ff ff ff ff ff ff ff
[ 767.934596] usb 3-1.1: 190: ff ff ff ff ff ff ff ff
[ 767.934601] usb 3-1.1: 198: ff ff ff ff ff ff ff ff
[ 767.934605] usb 3-1.1: 1a0: ff ff ff ff ff ff ff ff
[ 767.934610] usb 3-1.1: 1a8: ff ff ff ff ff ff ff ff
[ 767.934615] usb 3-1.1: 1b0: ff ff ff ff ff ff ff ff
[ 767.934620] usb 3-1.1: 1b8: ff ff ff ff ff ff ff ff
[ 767.934624] usb 3-1.1: 1c0: ff ff ff ff ff ff ff ff
[ 767.934629] usb 3-1.1: 1c8: ff ff ff ff ff ff ff ff
[ 767.934634] usb 3-1.1: 1d0: ff ff ff ff ff ff ff ff
[ 767.934639] usb 3-1.1: 1d8: ff ff ff ff ff ff ff ff
[ 767.934643] usb 3-1.1: 1e0: ff ff ff ff ff ff ff ff
[ 767.934648] usb 3-1.1: 1e8: ff ff ff ff ff ff ff ff
[ 767.934653] usb 3-1.1: 1f0: ff ff ff ff ff ff ff ff
[ 767.934658] usb 3-1.1: 1f8: ff ff ff ff ff ff ff ff
[ 767.934664] usb 3-1.1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 767.934670] usb 3-1.1: RTL8192EU MAC: 7c:8b:ca:18:08:62
[ 767.934676] usb 3-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 767.939193] usb 3-1.1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
[ 767.939203] usb 3-1.1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed
[ 767.939210] usb 3-1.1: Fatal - failed to load firmware
[ 767.939241] rtl8xxxu: probe of 3-1.1:1.0 failed with error -11
[ 767.939286] usbcore: registered new interface driver rtl8xxxu
drivers hardware realtek hostapd arch-arm
edited May 19 at 17:24
55597
1124
asked Apr 18 at 12:57
akash
83
Avoid realtek. unix.stackexchange.com/questions/252210/…
– Rui F Ribeiro
Apr 18 at 13:29
Try driver=rtl871xdrv
– Rui F Ribeiro
Apr 18 at 13:42
Error obtained: **Configuration file: /etc/hostapd/hostapd.conf Line 6: invalid/unknown driver 'rtl871xdrv' 1 errors found in configuration file '/etc/hostapd/hostapd.conf' Failed to set up interface with /etc/hostapd/hostapd.conf Failed to initialize interface **@Rui F Riberiro
– akash
Apr 18 at 14:05
Thanks. Bear in mind not all combo of drivers/wifi sticks provide AP mode and monitor mode. That is a research that has to be done before buying one.
– Rui F Ribeiro
Apr 18 at 14:33
This device works well in raspberrypi as a AP mode. It also works well in ubuntu 16.04.1 as a AP mode. @Rui F Riberiro
– akash
Apr 18 at 14:36
 |Â
show 2 more comments
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I'm using odroid-xu4 with dietpi OS. I wished to use TL-WN822N wifi device as a hotspot. So I installed a driver of rtl8192eu by using this https://github.com/Mange/rtl8192eu-linux-driver
It installed correctly. After I installed hostapd and dnsmasq for it to work as a hotspot , hostapd is not running. It is always showing "exited".
The ifconfig result:
The iwconfig result:
My lsusb result:
My lshw result:
M hostapd /etc/hostapd/hostapd.conf result:
my hostapd.conf file contains:
interface=wlan1
driver=nl80211
ssid=WiFi-TV1
hw_mode=g
channel=3
ieee80211n=1
wmm_enabled=1
ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40]
macaddr_acl=0
ignore_broadcast_ssid=0
rsn_pairwise=CCMP
My wifi device details:https://wikidevi.com/wiki/TP-LINK_TL-WN822N_v4
My dmesg output:
[ 7.011912] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 767.652339] usb 3-1.1: new high-speed USB device number 4 using xhci-hcd
[ 767.753321] usb 3-1.1: New USB device found, idVendor=2357, idProduct=0108
[ 767.753352] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 767.753373] usb 3-1.1: Product: 802.11n NIC
[ 767.753393] usb 3-1.1: Manufacturer: Realtek
[ 767.753413] usb 3-1.1: SerialNumber: 00e04c000001
[ 767.839986] usb 3-1.1: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[ 767.839996] usb 3-1.1: Please report results to Jes.Sorensen@gmail.com
[ 767.934329] usb 3-1.1: Vendor: Realtek
[ 767.934336] usb 3-1.1: Product: 802.11n NI
[ 767.934341] usb 3-1.1: Serial:
[ 767.934347] usb 3-1.1: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 767.934354] usb 3-1.1: 00: 29 81 00 7c 01 40 03 00
[ 767.934359] usb 3-1.1: 08: 40 74 04 50 14 00 00 00
[ 767.934364] usb 3-1.1: 10: 2b 2b 2b 2b 2b 2b 2c 2c
[ 767.934369] usb 3-1.1: 18: 2b 2c 2c f2 ef ef ff ff
[ 767.934374] usb 3-1.1: 20: ff ff ff ff ff ff ff ff
[ 767.934379] usb 3-1.1: 28: ff ff ff ff ff ff ff ff
[ 767.934384] usb 3-1.1: 30: ff ff ff ff ff ff ff ff
[ 767.934389] usb 3-1.1: 38: ff ff 29 29 28 28 28 28
[ 767.934394] usb 3-1.1: 40: 28 28 28 28 28 f2 ef ef
[ 767.934399] usb 3-1.1: 48: ff ff ff ff ff ff ff ff
[ 767.934404] usb 3-1.1: 50: ff ff ff ff ff ff ff ff
[ 767.934408] usb 3-1.1: 58: ff ff ff ff ff ff ff ff
[ 767.934413] usb 3-1.1: 60: ff ff ff ff ff ff ff ff
[ 767.934418] usb 3-1.1: 68: ff ff ff ff ff ff ff ff
[ 767.934423] usb 3-1.1: 70: ff ff ff ff ff ff ff ff
[ 767.934428] usb 3-1.1: 78: ff ff ff ff ff ff ff ff
[ 767.934433] usb 3-1.1: 80: ff ff ff ff ff ff ff ff
[ 767.934438] usb 3-1.1: 88: ff ff ff ff ff ff ff ff
[ 767.934442] usb 3-1.1: 90: ff ff ff ff ff ff ff ff
[ 767.934447] usb 3-1.1: 98: ff ff ff ff ff ff ff ff
[ 767.934452] usb 3-1.1: a0: ff ff ff ff ff ff ff ff
[ 767.934457] usb 3-1.1: a8: ff ff ff ff ff ff ff ff
[ 767.934462] usb 3-1.1: b0: ff ff ff ff ff ff ff ff
[ 767.934466] usb 3-1.1: b8: a1 3e 1d 00 00 00 ff ff
[ 767.934472] usb 3-1.1: c0: ff 01 00 10 00 00 00 ff
[ 767.934476] usb 3-1.1: c8: 00 00 ff ff ff ff ff ff
[ 767.934481] usb 3-1.1: d0: 57 23 08 01 e7 47 02 7c
[ 767.934486] usb 3-1.1: d8: 8b ca 18 08 62 0a 03 52
[ 767.934491] usb 3-1.1: e0: 65 61 6c 74 65 6b 20 0e
[ 767.934495] usb 3-1.1: e8: 03 38 30 32 2e 31 31 6e
[ 767.934500] usb 3-1.1: f0: 20 4e 49 43 20 00 00 ff
[ 767.934505] usb 3-1.1: f8: ff ff ff ff ff ff ff ff
[ 767.934510] usb 3-1.1: 100: ff ff ff ff ff ff ff ff
[ 767.934515] usb 3-1.1: 108: ff ff ff ff ff ff ff ff
[ 767.934519] usb 3-1.1: 110: ff ff ff ff ff ff ff 0d
[ 767.934524] usb 3-1.1: 118: 03 00 05 00 30 00 00 00
[ 767.934529] usb 3-1.1: 120: 00 93 ff ff ff ff ff ff
[ 767.934534] usb 3-1.1: 128: ff ff ff ff ff ff ff ff
[ 767.934539] usb 3-1.1: 130: f6 a8 98 2d 03 92 98 00
[ 767.934543] usb 3-1.1: 138: fc 8c 00 11 9b 44 02 0a
[ 767.934548] usb 3-1.1: 140: ff ff ff ff ff ff ff ff
[ 767.934553] usb 3-1.1: 148: ff ff ff ff ff ff ff ff
[ 767.934558] usb 3-1.1: 150: ff ff ff ff ff ff ff ff
[ 767.934562] usb 3-1.1: 158: ff ff ff ff ff ff ff ff
[ 767.934567] usb 3-1.1: 160: ff ff ff ff ff ff ff ff
[ 767.934572] usb 3-1.1: 168: ff ff ff ff ff ff ff ff
[ 767.934577] usb 3-1.1: 170: ff ff ff ff ff ff ff ff
[ 767.934582] usb 3-1.1: 178: ff ff ff ff ff ff ff ff
[ 767.934586] usb 3-1.1: 180: ff ff ff ff ff ff ff ff
[ 767.934591] usb 3-1.1: 188: ff ff ff ff ff ff ff ff
[ 767.934596] usb 3-1.1: 190: ff ff ff ff ff ff ff ff
[ 767.934601] usb 3-1.1: 198: ff ff ff ff ff ff ff ff
[ 767.934605] usb 3-1.1: 1a0: ff ff ff ff ff ff ff ff
[ 767.934610] usb 3-1.1: 1a8: ff ff ff ff ff ff ff ff
[ 767.934615] usb 3-1.1: 1b0: ff ff ff ff ff ff ff ff
[ 767.934620] usb 3-1.1: 1b8: ff ff ff ff ff ff ff ff
[ 767.934624] usb 3-1.1: 1c0: ff ff ff ff ff ff ff ff
[ 767.934629] usb 3-1.1: 1c8: ff ff ff ff ff ff ff ff
[ 767.934634] usb 3-1.1: 1d0: ff ff ff ff ff ff ff ff
[ 767.934639] usb 3-1.1: 1d8: ff ff ff ff ff ff ff ff
[ 767.934643] usb 3-1.1: 1e0: ff ff ff ff ff ff ff ff
[ 767.934648] usb 3-1.1: 1e8: ff ff ff ff ff ff ff ff
[ 767.934653] usb 3-1.1: 1f0: ff ff ff ff ff ff ff ff
[ 767.934658] usb 3-1.1: 1f8: ff ff ff ff ff ff ff ff
[ 767.934664] usb 3-1.1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 767.934670] usb 3-1.1: RTL8192EU MAC: 7c:8b:ca:18:08:62
[ 767.934676] usb 3-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 767.939193] usb 3-1.1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
[ 767.939203] usb 3-1.1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed
[ 767.939210] usb 3-1.1: Fatal - failed to load firmware
[ 767.939241] rtl8xxxu: probe of 3-1.1:1.0 failed with error -11
[ 767.939286] usbcore: registered new interface driver rtl8xxxu
drivers hardware realtek hostapd arch-arm
edited May 19 at 17:24
55597
1124
asked Apr 18 at 12:57
akash
83
I'm using odroid-xu4 with dietpi OS. I wished to use TL-WN822N wifi device as a hotspot. So I installed a driver of rtl8192eu by using this https://github.com/Mange/rtl8192eu-linux-driver
It installed correctly. After I installed hostapd and dnsmasq for it to work as a hotspot , hostapd is not running. It is always showing "exited".
The ifconfig result:
The iwconfig result:
My lsusb result:
My lshw result:
M hostapd /etc/hostapd/hostapd.conf result:
my hostapd.conf file contains:
interface=wlan1
driver=nl80211
ssid=WiFi-TV1
hw_mode=g
channel=3
ieee80211n=1
wmm_enabled=1
ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40]
macaddr_acl=0
ignore_broadcast_ssid=0
rsn_pairwise=CCMP
My wifi device details:https://wikidevi.com/wiki/TP-LINK_TL-WN822N_v4
My dmesg output:
[ 7.011912] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 767.652339] usb 3-1.1: new high-speed USB device number 4 using xhci-hcd
[ 767.753321] usb 3-1.1: New USB device found, idVendor=2357, idProduct=0108
[ 767.753352] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 767.753373] usb 3-1.1: Product: 802.11n NIC
[ 767.753393] usb 3-1.1: Manufacturer: Realtek
[ 767.753413] usb 3-1.1: SerialNumber: 00e04c000001
[ 767.839986] usb 3-1.1: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[ 767.839996] usb 3-1.1: Please report results to Jes.Sorensen@gmail.com
[ 767.934329] usb 3-1.1: Vendor: Realtek
[ 767.934336] usb 3-1.1: Product: 802.11n NI
[ 767.934341] usb 3-1.1: Serial:
[ 767.934347] usb 3-1.1: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 767.934354] usb 3-1.1: 00: 29 81 00 7c 01 40 03 00
[ 767.934359] usb 3-1.1: 08: 40 74 04 50 14 00 00 00
[ 767.934364] usb 3-1.1: 10: 2b 2b 2b 2b 2b 2b 2c 2c
[ 767.934369] usb 3-1.1: 18: 2b 2c 2c f2 ef ef ff ff
[ 767.934374] usb 3-1.1: 20: ff ff ff ff ff ff ff ff
[ 767.934379] usb 3-1.1: 28: ff ff ff ff ff ff ff ff
[ 767.934384] usb 3-1.1: 30: ff ff ff ff ff ff ff ff
[ 767.934389] usb 3-1.1: 38: ff ff 29 29 28 28 28 28
[ 767.934394] usb 3-1.1: 40: 28 28 28 28 28 f2 ef ef
[ 767.934399] usb 3-1.1: 48: ff ff ff ff ff ff ff ff
[ 767.934404] usb 3-1.1: 50: ff ff ff ff ff ff ff ff
[ 767.934408] usb 3-1.1: 58: ff ff ff ff ff ff ff ff
[ 767.934413] usb 3-1.1: 60: ff ff ff ff ff ff ff ff
[ 767.934418] usb 3-1.1: 68: ff ff ff ff ff ff ff ff
[ 767.934423] usb 3-1.1: 70: ff ff ff ff ff ff ff ff
[ 767.934428] usb 3-1.1: 78: ff ff ff ff ff ff ff ff
[ 767.934433] usb 3-1.1: 80: ff ff ff ff ff ff ff ff
[ 767.934438] usb 3-1.1: 88: ff ff ff ff ff ff ff ff
[ 767.934442] usb 3-1.1: 90: ff ff ff ff ff ff ff ff
[ 767.934447] usb 3-1.1: 98: ff ff ff ff ff ff ff ff
[ 767.934452] usb 3-1.1: a0: ff ff ff ff ff ff ff ff
[ 767.934457] usb 3-1.1: a8: ff ff ff ff ff ff ff ff
[ 767.934462] usb 3-1.1: b0: ff ff ff ff ff ff ff ff
[ 767.934466] usb 3-1.1: b8: a1 3e 1d 00 00 00 ff ff
[ 767.934472] usb 3-1.1: c0: ff 01 00 10 00 00 00 ff
[ 767.934476] usb 3-1.1: c8: 00 00 ff ff ff ff ff ff
[ 767.934481] usb 3-1.1: d0: 57 23 08 01 e7 47 02 7c
[ 767.934486] usb 3-1.1: d8: 8b ca 18 08 62 0a 03 52
[ 767.934491] usb 3-1.1: e0: 65 61 6c 74 65 6b 20 0e
[ 767.934495] usb 3-1.1: e8: 03 38 30 32 2e 31 31 6e
[ 767.934500] usb 3-1.1: f0: 20 4e 49 43 20 00 00 ff
[ 767.934505] usb 3-1.1: f8: ff ff ff ff ff ff ff ff
[ 767.934510] usb 3-1.1: 100: ff ff ff ff ff ff ff ff
[ 767.934515] usb 3-1.1: 108: ff ff ff ff ff ff ff ff
[ 767.934519] usb 3-1.1: 110: ff ff ff ff ff ff ff 0d
[ 767.934524] usb 3-1.1: 118: 03 00 05 00 30 00 00 00
[ 767.934529] usb 3-1.1: 120: 00 93 ff ff ff ff ff ff
[ 767.934534] usb 3-1.1: 128: ff ff ff ff ff ff ff ff
[ 767.934539] usb 3-1.1: 130: f6 a8 98 2d 03 92 98 00
[ 767.934543] usb 3-1.1: 138: fc 8c 00 11 9b 44 02 0a
[ 767.934548] usb 3-1.1: 140: ff ff ff ff ff ff ff ff
[ 767.934553] usb 3-1.1: 148: ff ff ff ff ff ff ff ff
[ 767.934558] usb 3-1.1: 150: ff ff ff ff ff ff ff ff
[ 767.934562] usb 3-1.1: 158: ff ff ff ff ff ff ff ff
[ 767.934567] usb 3-1.1: 160: ff ff ff ff ff ff ff ff
[ 767.934572] usb 3-1.1: 168: ff ff ff ff ff ff ff ff
[ 767.934577] usb 3-1.1: 170: ff ff ff ff ff ff ff ff
[ 767.934582] usb 3-1.1: 178: ff ff ff ff ff ff ff ff
[ 767.934586] usb 3-1.1: 180: ff ff ff ff ff ff ff ff
[ 767.934591] usb 3-1.1: 188: ff ff ff ff ff ff ff ff
[ 767.934596] usb 3-1.1: 190: ff ff ff ff ff ff ff ff
[ 767.934601] usb 3-1.1: 198: ff ff ff ff ff ff ff ff
[ 767.934605] usb 3-1.1: 1a0: ff ff ff ff ff ff ff ff
[ 767.934610] usb 3-1.1: 1a8: ff ff ff ff ff ff ff ff
[ 767.934615] usb 3-1.1: 1b0: ff ff ff ff ff ff ff ff
[ 767.934620] usb 3-1.1: 1b8: ff ff ff ff ff ff ff ff
[ 767.934624] usb 3-1.1: 1c0: ff ff ff ff ff ff ff ff
[ 767.934629] usb 3-1.1: 1c8: ff ff ff ff ff ff ff ff
[ 767.934634] usb 3-1.1: 1d0: ff ff ff ff ff ff ff ff
[ 767.934639] usb 3-1.1: 1d8: ff ff ff ff ff ff ff ff
[ 767.934643] usb 3-1.1: 1e0: ff ff ff ff ff ff ff ff
[ 767.934648] usb 3-1.1: 1e8: ff ff ff ff ff ff ff ff
[ 767.934653] usb 3-1.1: 1f0: ff ff ff ff ff ff ff ff
[ 767.934658] usb 3-1.1: 1f8: ff ff ff ff ff ff ff ff
[ 767.934664] usb 3-1.1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 767.934670] usb 3-1.1: RTL8192EU MAC: 7c:8b:ca:18:08:62
[ 767.934676] usb 3-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 767.939193] usb 3-1.1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
[ 767.939203] usb 3-1.1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed
[ 767.939210] usb 3-1.1: Fatal - failed to load firmware
[ 767.939241] rtl8xxxu: probe of 3-1.1:1.0 failed with error -11
[ 767.939286] usbcore: registered new interface driver rtl8xxxu
drivers hardware realtek hostapd arch-arm
edited May 19 at 17:24
55597
1124
asked Apr 18 at 12:57
akash
83
edited May 19 at 17:24
55597
1124
edited May 19 at 17:24
55597
1124
edited May 19 at 17:24
55597
1124
1124
asked Apr 18 at 12:57
akash
83
asked Apr 18 at 12:57
akash
83
asked Apr 18 at 12:57
akash
83
83
Avoid realtek. unix.stackexchange.com/questions/252210/…
– Rui F Ribeiro
Apr 18 at 13:29
Try driver=rtl871xdrv
– Rui F Ribeiro
Apr 18 at 13:42
Error obtained: **Configuration file: /etc/hostapd/hostapd.conf Line 6: invalid/unknown driver 'rtl871xdrv' 1 errors found in configuration file '/etc/hostapd/hostapd.conf' Failed to set up interface with /etc/hostapd/hostapd.conf Failed to initialize interface **@Rui F Riberiro
– akash
Apr 18 at 14:05
Thanks. Bear in mind not all combo of drivers/wifi sticks provide AP mode and monitor mode. That is a research that has to be done before buying one.
– Rui F Ribeiro
Apr 18 at 14:33
This device works well in raspberrypi as a AP mode. It also works well in ubuntu 16.04.1 as a AP mode. @Rui F Riberiro
– akash
Apr 18 at 14:36
 |Â
show 2 more comments
Avoid realtek. unix.stackexchange.com/questions/252210/…
– Rui F Ribeiro
Apr 18 at 13:29
Try driver=rtl871xdrv
– Rui F Ribeiro
Apr 18 at 13:42
Error obtained: **Configuration file: /etc/hostapd/hostapd.conf Line 6: invalid/unknown driver 'rtl871xdrv' 1 errors found in configuration file '/etc/hostapd/hostapd.conf' Failed to set up interface with /etc/hostapd/hostapd.conf Failed to initialize interface **@Rui F Riberiro
– akash
Apr 18 at 14:05
Thanks. Bear in mind not all combo of drivers/wifi sticks provide AP mode and monitor mode. That is a research that has to be done before buying one.
– Rui F Ribeiro
Apr 18 at 14:33
This device works well in raspberrypi as a AP mode. It also works well in ubuntu 16.04.1 as a AP mode. @Rui F Riberiro
– akash
Apr 18 at 14:36
Avoid realtek. unix.stackexchange.com/questions/252210/…
– Rui F Ribeiro
Apr 18 at 13:29
Avoid realtek. unix.stackexchange.com/questions/252210/…
– Rui F Ribeiro
Apr 18 at 13:29
Try driver=rtl871xdrv
– Rui F Ribeiro
Apr 18 at 13:42
Try driver=rtl871xdrv
– Rui F Ribeiro
Apr 18 at 13:42
Error obtained: **Configuration file: /etc/hostapd/hostapd.conf Line 6: invalid/unknown driver 'rtl871xdrv' 1 errors found in configuration file '/etc/hostapd/hostapd.conf' Failed to set up interface with /etc/hostapd/hostapd.conf Failed to initialize interface **@Rui F Riberiro
– akash
Apr 18 at 14:05
Error obtained: **Configuration file: /etc/hostapd/hostapd.conf Line 6: invalid/unknown driver 'rtl871xdrv' 1 errors found in configuration file '/etc/hostapd/hostapd.conf' Failed to set up interface with /etc/hostapd/hostapd.conf Failed to initialize interface **@Rui F Riberiro
– akash
Apr 18 at 14:05
Thanks. Bear in mind not all combo of drivers/wifi sticks provide AP mode and monitor mode. That is a research that has to be done before buying one.
– Rui F Ribeiro
Apr 18 at 14:33
Thanks. Bear in mind not all combo of drivers/wifi sticks provide AP mode and monitor mode. That is a research that has to be done before buying one.
– Rui F Ribeiro
Apr 18 at 14:33
This device works well in raspberrypi as a AP mode. It also works well in ubuntu 16.04.1 as a AP mode. @Rui F Riberiro
– akash
Apr 18 at 14:36
This device works well in raspberrypi as a AP mode. It also works well in ubuntu 16.04.1 as a AP mode. @Rui F Riberiro
– akash
Apr 18 at 14:36
 |Â
show 2 more comments
active
oldest
votes
active
oldest
votes
active
oldest
votes
active
oldest
votes
active
oldest
votes
Â
draft saved
draft discarded
Â
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f438501%2ftl-wn822n-wifi-not-establishing-ap-mode-in-armv7l%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Avoid realtek. unix.stackexchange.com/questions/252210/…
– Rui F Ribeiro
Apr 18 at 13:29
Try driver=rtl871xdrv
– Rui F Ribeiro
Apr 18 at 13:42
Error obtained: **Configuration file: /etc/hostapd/hostapd.conf Line 6: invalid/unknown driver 'rtl871xdrv' 1 errors found in configuration file '/etc/hostapd/hostapd.conf' Failed to set up interface with /etc/hostapd/hostapd.conf Failed to initialize interface **@Rui F Riberiro
– akash
Apr 18 at 14:05
Thanks. Bear in mind not all combo of drivers/wifi sticks provide AP mode and monitor mode. That is a research that has to be done before buying one.
– Rui F Ribeiro
Apr 18 at 14:33
This device works well in raspberrypi as a AP mode. It also works well in ubuntu 16.04.1 as a AP mode. @Rui F Riberiro
– akash
Apr 18 at 14:36